Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
satstuff-getting worse!- why oh why can't i download?!
[ Part 1, Text/PLAIN 184 lines. ]
[ Unable to print this part. ]
Hi,
well, i recompiled the whole lot, and rebooted the machine, but now i'm
getting outcommand errors :( what a mess!
anyway, in
/DVB/drivers/make
seems to work
/DVB/drivers/make install
seems to work, allthough it doesn't copy the msp3400 module
/DVB/drivers/make insmod gives me this:
insmod i2c-core.o; \
insmod videodev.o; \
insmod saa7146_core.o mode=0; \
insmod saa7146_v4l.o; \
insmod VES1893.o; \
insmod VES1820.o; \
insmod dvb.o; \
insmod tuner.o; \
insmod msp3400.o; \
ifconfig dvb0 192.168.4.1; \
)
insmod: a module named i2c-core already exists
videodev.o: unresolved symbol request_module_R27e4dc04
insmod: a module named saa7146_core already exists
insmod: a module named saa7146_v4l already exists
insmod: a module named VES1893 already exists
insmod: a module named VES1820 already exists
insmod: a module named dvb already exists
insmod: a module named tuner already exists
msp3400.o: msp3400.o: No such file or directory
make reload seems to work though...
then running dvbd goes fine. (proper sync and all!)
router:/etc/squid# dvbd
Fsync = 0, Freq = 2040000000, Sync = 127 Afc = 4294279796 Agc = 367 Nest
= 16128 Vber = 113 Fsync = 0, Freq = 2040000000, Sync = 127 Afc =
4294279796 Agc = 319 Nest = 16128 Vber = 113 Fsync = 0, Freq =
2040000000, Sync = 127 Afc = 4294279796 Agc = 351 Nest = 16384 Vber = 102
Fsync = 0, Freq = 2040000000, Sync = 127 Afc = 4294279796 Agc = 335 Nest
= 16640 Vber = 102 Fsync = 0, Freq = 2040000000, Sync = 127 Afc =
4294279796 Agc = 383 Nest = 16384 Vber = 102 Fsync = 0, Freq =
2040000000, Sync = 127 Afc = 4294279796 Agc = 335 Nest = 16896 Vber = 85
lsmod gives me this:
Module Size Used by
tuner 3756 0 (unused)
dvb 1340208 1
VES1820 3392 0 (unused)
VES1893 3572 0 (unused)
saa7146_v4l 15068 0 (unused)
saa7146_core 13852 0 [dvb saa7146_v4l]
i2c-core 11100 0 [tuner dvb VES1820 VES1893
saa7146_core]
ip_masq_vdolive 1432 0 (unused)
ip_masq_user 2664 0 (unused)
ip_masq_raudio 3064 0 (unused)
ip_masq_quake 1448 0 (unused)
ip_masq_irc 1624 0 (unused)
ip_masq_ftp 2552 0
ip_masq_cuseeme 1176 0 (unused)
rtl8139 11904 1
these are the settings the system defaults to: (i know rp_filter should
be off!)
router:/proc/sys/net/ipv4/conf/dvb0# cat accept_redirects
1
router:/proc/sys/net/ipv4/conf/dvb0# cat accept_source_route
1
router:/proc/sys/net/ipv4/conf/dvb0# cat bootp_relay
0
router:/proc/sys/net/ipv4/conf/dvb0# cat forwarding
1
router:/proc/sys/net/ipv4/conf/dvb0# cat hidden
0
router:/proc/sys/net/ipv4/conf/dvb0# cat log_martians
0
router:/proc/sys/net/ipv4/conf/dvb0# cat mc_forwarding
0
router:/proc/sys/net/ipv4/conf/dvb0# cat proxy_arp
0
router:/proc/sys/net/ipv4/conf/dvb0# cat rp_filter
1
router:/proc/sys/net/ipv4/conf/dvb0# cat secure_redirects
1
router:/proc/sys/net/ipv4/conf/dvb0# cat send_redirects
1
router:/proc/sys/net/ipv4/conf/dvb0# cat shared_media
1
this is my dvbd.conf
# DVB receiver configuration file, (c) 2000 data planet international
# TP114
power 1
symbolrate 22000000
frequency 12640000
ttk 1
diseqc 0
AFC 1
polarisation 0
filter_0 512
and ping 194.177.32.44 still doesn't work!!!!
router:/etc# ping glop114.europonline.net
ping: unknown host glop114.europonline.net
router:/proc# ifconfig
dvb0 Link encap:Ethernet HWaddr 00:02:C0:A8:01:01
inet addr:192.168.4.1 Bcast:192.168.4.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
eth0 Link encap:Ethernet HWaddr 00:E0:4C:69:E9:B4
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1802 errors:0 dropped:0 overruns:0 frame:0
TX packets:1327 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
Interrupt:11 Base address:0xc000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:3924 Metric:1
RX packets:143 errors:0 dropped:0 overruns:0 frame:0
TX packets:143 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
ppp0 Link encap:Point-to-Point Protocol
inet addr:213.17.1.246 P-t-P:195.96.98.253
Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:1016 errors:26 dropped:0 overruns:0 frame:26
TX packets:1100 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:10
so this all seems to work too...
router:/etc/squid# cat squid.conf
http_port 8080
icp_port 0
acl QUERY urlpath_regex cgi-bin \?
no_cache deny QUERY
cache_mem 6 MB
cache_dir ufs /var/cache/squid 200 16 256
cache_peer glop114.europeonline.net parent 8080 7 no-query no-digest
no-netdb-exchange default login=********:******** (yes, i do have the
userid and pw in here!)
emulate_httpd_log on
redirect_rewrites_host_header off
replacement_policy GDSF
acl localnet src 192.168.1.0/255.255.255.0
acl localhost src 127.0.0.1/255.255.255.255
acl Safe_ports port 80 443 210 119 70 21 1025-65535
acl CONNECT method CONNECT
acl all src 0.0.0.0/0.0.0.0
http_access allow localnet
http_access allow localhost
http_access deny !Safe_ports
http_access deny CONNECT
http_access deny all
cache_mgr admin@openna.com
cache_effective_user squid
cache_effective_group squid
httpd_accel_host 192.168.1.1
httpd_accel_port 80
log_icp_queries off
cachemgr_passwd my-secret-pass all
buffered_logs on
cache_access_log /var/log/squid/access.log
cache_log /var/log/squid/cache.log
cache_store_log /var/log/squid/store.log
pid_filename /var/run/squid.pid
ftp_user browser@tripany.com
cache_effective_user squid
cache_effective_group squid
Anyone see anything i'm doing wrong?!
cheers
Robin
Home |
Main Index |
Thread Index