[linux-dvb] Re: Missing Field?

[Ralph Metzler <rjkm@convergence.de>]

Ian Wilson writes:
 > 
 > 
 > > Ian Wilson writes:
 > >  > 	When I run VDR everything runs fine with no errors in the log
 > >  > but I get a flickering on the output screen.  It seems like a field
 > >  > is missing.  I added the patches to the DVB driver for NTSC and
 > >  > that has fixed the problem of a big black line at the bottom of the
 > >  > display
 > > 
 > > Where can I find these patches?
 > 
 > 	I just added modified the one line that sets
 > 		dvb->vidmode = video_mode_NTSC  [dvb.c]
 > 	and modified 
 > 		static init mode = 1		  [saa7146_core.c]
 > 	and for good measure
 > 		mode = 1				  [Makefile]
 > 
 > 	they may not have been nessecary, but I got them from previous
 > 	posts about NTSC.
 > > 
 > > Is this flickering on TV out or on the PC monitor?
 > 
 > 	The flickering is appearing on the monitor.  Using Tuxview, it
 > seems
 > 	that every other line is missing.


OK, then it is a different problem with the SAA7146 driver.
Sorry, I did not get around fixing this yet. I did not write the 
overlay and grabbing stuff and first will have to read
and understand that part of the SAA7146 data sheet when I have 
the time for it. But I guess that just a few register settings are 
a little off. 


Ralph


-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject.