[linux-dvb] Problems: mini-itx mb and galaxis 1.3

[Bruno Seoane <bseoane@teleline.es>]

Hi,

   I'm having some problems to get this combo working.

I'm using right now kernel 2.4.19pre10 and latest cvs snapshot.
As stated in subject I'm using a Via Epia MB and Galaxis v1.3

When I try to tune some channel with vdr this is what is written to
messages:

try to open DEVICE_FRONTEND_0
GPIO0 irq 7 1024
GPIO0 irq 07
GPIO0 irq 7 11180
GPIO0 irq 07
GPIO0 irq 7 9132
GPIO0 irq 07
GPIO0 irq 7 7084
GPIO0 irq 07
GPIO0 irq 7 5036
GPIO0 irq 07
GPIO0 irq 7 2988
GPIO0 irq 07
GPIO0 irq 7 940
GPIO0 irq 07
GPIO0 irq 7 0
GPIO0 irq 07
GPIO0 irq exit 0

and nothing happens... but there is another problem: I don't get any
output through composite video cinch.

Any idea about what could be wrong?


This is modules output:

i2c-core.o: driver VES1893 DVB demodulator registered.
i2c-core.o: driver VES1820 DVB demodulator registered.
i2c-core.o: driver L64781 DVB demodulator registered.
init_SP8870:
i2c-core.o: driver SP8870 DVB demodulator registered.
i2c-core.o: driver tda8083 DVB demodulator registered.
i2c-core.o: driver stv0299 DVB demodulator registered.
i2c-core.o: driver i2c TV tuner driver registered.
saa7146_core.o: saa7146(1): bus:0, rev:1, mem:0xd0162000.
i2c-core.o: client [VES1893] registered to adapter [saa7146(1)](pos. 0).
VES1893: attaching VES1893 at 0x10 to adapter saa7146(1)
SP8870: no SP8870 found ...
tuner: chip found @ 0x61
i2c-core.o: client [i2c tv tuner chip] registered to adapter [saa7146(1)](pos. 1).
i2c-core.o: adapter saa7146(1) registered as adapter 0.
dvb: init_dvb
bootarm: debi test OK
bootarm: load boot code
bootarm: load dram code
Unable to load 'arm_firm/Root'.
Writing DRAM block 0
Writing DRAM block 1
Writing DRAM block 2
Writing DRAM block 3
...
Writing DRAM block 81
bootarm: load dpram code
Unable to load 'arm_firm/Dpram'.
dvb0: AV7111 - firm f0240009, rtsl b0250018, vid 71010068, app 00012301
adapter id = 24  addr = 10
adapter id = 02  addr = c2
dvb: dvb_init_done called
dvb: dvbdevice found
dvb: 1 dvb(s) found!

cat /proc/interrupts

           CPU0
  0:     210147          XT-PIC  timer
  1:        198          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  3:         71          XT-PIC  saa7146(1)
  8:          1          XT-PIC  rtc
  9:          0          XT-PIC  usb-uhci, usb-uhci
 10:          0          XT-PIC  via82cxxx
 11:      37501          XT-PIC  eth0
 14:      10232          XT-PIC  ide0
NMI:          0 
ERR:          0


cat /proc/video/dev/video0


name            : DVB Board
type            : VID_TYPE_CAPTURE|VID_TYPE_TUNER|VID_TYPE_OVERLAY|VID_TYPE_CLIPPING|VID_TYPE_FRAMERAM|VID_TYPE_SCALES
hardware        : 0xb






-- 
Greetings,
 Bruno                          mailto:bseoane@teleline.es



-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject.