[linux-dvb] Frontend of new NOVA not yet supported

[Markus Lauer <lauerm@web.de>]

*This message was transferred with a trial version of CommuniGate(tm) Pro*
Hi Peter, Hi List!

It seems that my frontend (STV0229B) is not supported.
I have a "new" NOVA (WITHOUT CI):
----------------------------------------------------------------------
Bus  0, device  13, function  0:
     Multimedia controller: Philips Semiconductors SAA7146 (rev 1).
       IRQ 11.
       Master Capable.  Latency=32.  Min Gnt=15.Max Lat=38.
       Non-prefetchable 32 bit memory at 0xed800000 [0xed8001ff].
-----------------------------------------------------------------------


-----------------------------------------------------------------------------
Jan 11 17:18:39 donald kernel: Linux video capture interface: v1.00
Jan 11 17:18:40 donald kernel: saa7146: saa7146_register_extension():
ext:e1de1700
Jan 11 17:18:40 donald kernel: saa7146: register extension 'budget dvb'.
Jan 11 17:18:40 donald kernel: saa7146: saa7146_init_one(): pci:c1589000
Jan 11 17:18:40 donald kernel: PCI: Found IRQ 11 for device 00:0d.0
Jan 11 17:18:40 donald kernel: PCI: Sharing IRQ 11 with 00:11.1
Jan 11 17:18:40 donald kernel: PCI: Sharing IRQ 11 with 01:00.0
Jan 11 17:18:40 donald kernel: saa7146: found saa7146 @ mem 0xe1de3000
(revision 1, irq 11) (0x13c2,0x100f).
Jan 11 17:18:40 donald kernel: budget: this_budget_attach(): budget:
00000000
Jan 11 17:18:40 donald kernel: budget: budget_attach(): dev: dc5b5a80,
budget: d9a20000
Jan 11 17:18:40 donald kernel: DVB: registering new adapter
(TT-Budget/WinTV-NOVA-CI PCI).
Jan 11 17:18:40 donald kernel: saa7146: saa7146_i2c_adapter_prepare():
bitrate: 0x00000100
Jan 11 17:18:40 donald kernel: budget: budget_register(): budget: d9a20000
Jan 11 17:18:40 donald kernel: budget: found budget card
'TT-Budget/WinTV-NOVA-CI PCI'.
Jan 11 17:18:50 donald kernel: stv0299.c: unknown PLL synthesizer,
please report to <linuxdvb@linuxtv.org>!!
----------------------------------------------------------------------------

I'm using the current CVS dvb-kernel driver and built it under /build-2.4
Compilation finishs with no error.
I'm able to load every module.

But I can't scan, zap, view, whatever..

When will my frontend be supported from the driver?



Markus Lauer.






--
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject.