[linux-dvb] Re: DVB Newbie

[michal <michal@etc.cz>]

It's really very broken ...

[root@vonasek tmp]# cat broken.ts | TScheckcontinuity
New pid (600) found
New pid (601) found
Discontinuity found, pid 600, frame 88
15 0 15 14 13
Discontinuity found, pid 601, frame 98
11 2 1 0 15
Discontinuity found, pid 600, frame 504
1 7 6 5 4
Discontinuity found, pid 601, frame 519
3 1 0 15 14
Discontinuity found, pid 600, frame 1058
8 12 11 10 9
Discontinuity found, pid 601, frame 1079
2 0 15 14 13
Discontinuity found, pid 600, frame 1887
3 6 5 4 3
Discontinuity found, pid 600, frame 2439
7 12 11 10 9
Discontinuity found, pid 601, frame 2451
0 13 12 11 10
and so on ...

I don't know if it'll help, but try to setup also another parameters like
-qam X      DVB-T modulation - 16, 32, 64 (default), 128 or 256
-gi N       DVB-T guard interval 1_N (N=32 (default), 16, 8 or 4)
-cr N       DVB-T code rate. N=AUTO, 1_2, 2_3 (default), 3_4, 5_6, 7_8
-bw N       DVB-T bandwidth (Mhz) - N=6, 7 or 8 (default)
-tm N       DVB-T transmission mode - N=2 (default) or 8

And what shows tzap?
Try configure ~/.tzap/channels.conf and run following on separate consoles:
tzap -r CHANNEL
cat /dev/dvb/adapter0/dvr0 | xine -

Michal


--[ UxBoD ]-- wrote:
> Okay I have upload some stream using :
>
> dvbstream -f 641833 -v 600 -a 601 -o > /tmp/broken.ts
>
> it is at :
>
> http://www.splatnix.net/broken.ts
>
> regards
>
> Phil


--
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe linux-dvb" as subject.