[linux-dvb] Re: IP via Sky - CRASH with Siemens dvb-s Rev.1.3

[Steffen Barszus <st_barszus@gmx.de>]

Am Mittwoch, 18. Juni 2003 01:31 schrieben Sie:
> Hi
>
> > > I hope I get some help here. I want to use filiago. As far as I
> > > understood it is the same service like T-DSL via Sat. (Transponder 107,
> > > Astra 1H) a proxy is used for the connection. But I'm not that far yet.
> > > I try to use the TDSLvia SAT HowTo from selflinux.
> >
> > I have  it running after finding out the right PID and frequency.
>
> Can you tell us these values, so we can have a look for it?
> I hope, that I have a little bit of time this weekend, so I will try it.

frequency is 12544700 , PID 1297 (dez)/0x511(hex), cr is 5/6

So according to 
http://www.wershofen.de/TDSLviaSat-HowTo/TDSLviaSAT-HowTo-5.html#a5.3

I have used:

dvbtune -c 0 -f 12544700 -p H -s 22000 -n 0x511 -cr 5_6
(Output of that command at the end of this mail)

then changing net_start.sh line PID=... in PID=1297 and line ./dvbnet -a $PID 
to ./dvbnet -p $PID. After changing that I have looked with dvbnet -l that 
there is no net interface defined yet and have then startet the script. The 
MAC adress I have not changed (I have not found how to find the MAC of my 
card). The Tellique proxy I have downloaded from 
http://www.ipviasky.com/tsky/down/downsoft.html (version 2.3.0). Further I 
have installed the filiago-soft with wine to get the content of that soft (I 
have attached the needed recv.ini so you don't need to do so, it is simply 
the windows tellique-proxy). Username is Filiago, password is filiago. 
Then you need a uplink-connection over modem or isdn. The number for that is 
01937400579 (germany/ beware it costs 5,9 ct per minute!). The username and 
password is anything but not empty. 
To log in in the client the adress is 
http://127.0.0.1:2517/www/client/login/login.html .  Proxy settings are 
127.0.0.1:9202 for all but socks5. For socks5 it is 127.0.0.1:9203 . 


I think thats all I needed, if something is missing or informations to solve 
my problem are missing i will try to provide them.

Thanks Steffen

(dvbtune)
Using DVB card "Alps BSRV2"
tuning DVB-S to L-Band:1073879976, Pol:H Srate=22000000, 22kHz=off
polling....
Getting frontend event
FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC
Bit error rate: 0
Signal strength: 42405
SNR: 53456
FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC


[recipient]
user_name=Filiago
user_name_prefix=easynet!
user_key_crypt=izkh-he6w-qlea-w8o7

[shell]
login=none

[etcp_parameters]
server_proxy_host_name=send01.skybooster.net
server_proxy_port=59299
authentication=1
server_announcement_address=235.1.0.1:52513
server_announcement_address=235.2.0.1:52513
server_announcement_address=235.3.0.1:52513
server_announcement_address=235.4.0.1:52513