Hi!
I have given IPviaSky another try today again. I want to use filiago.
To make things a littlebit easier I have written me a little script (attached,
maybe it is usefull for others too, its an extended version of the
net_start.sh in DVB/apps/dvbnet, dvbtune and dvbnet I have copied in my path
(/usr/local/sbin))
When I start it and then execute an ifconfig dvb0_0 promisc or ifconfig dvb0_0
allmulti, iptraf shows me bitrates of 2300 kbit/s up to 2800 kbit/s . For
real use I switched back to normal (ifconfig dvb0_0 -promisc, -allmulti),
starting the tellique proxy, dial in to filiago. A look at the log shows me
that it has found the remote proxy, starting up the browser andf search a big
file (or more then one) and try to download them. iptraf shows me then
ingoing rates of 21kbit/s - 70 kbit/s. Thats not near any speed I would have
thought I get. Are here others who have tried it ? Is something wrong with my
setup ?
from dvbtune:
Bit error rate: 0
Signal strength: 40863
SNR: 54227
FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC
Successfully opened network device, please configure the dvb interface
ifconfig:
dvb0_0 Protokoll:Ethernet Hardware Adresse 00:D0:5C:5B:A5:E1
inet Adresse:192.168.0.99 Bcast:192.168.0.255 Maske:255.255.255.0
UP BROADCAST RUNNING NOARP MULTICAST MTU:4096 Metric:1
RX packets:52322 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:100
RX bytes:62860834 (59.9 Mb) TX bytes:0 (0.0 b)
Basisadresse:0x511
As far as I have understood the MAC adress is not relevant for this setup, or
is this false ? Where can I find the MAC on my siemens DVB-s rev 1.3, haven't
found anything written on the card.
Any help appreciated.
Steffen
Attachment:
filiago
Description: application/shellscript