[linux-dvb] Re: SkyStar 2 (cvs dvb-kernel problem)

["Augusto Cardoso" <augusto@carhil.net>]

Hi!

The reason why you get the error messages is because some of the modules that you are loading probe the i2c for their respective devices. Since your card don't have these devices, it generates an error.

The best way is to load only the modules that you need.
For the 2.3, 2.3P and 2.3B Skystar2 cards, load only dvb-core.o, mt312.o and skystar2.o.
For the 2.6, 2.6A, 2.6B, 3.0 and 3.1 Skystar2 cards, load only dvb-core.o, stv0299.o and skystar2.o.
If you do that, you won't get the error messages.

	Augusto

*********** REPLY SEPARATOR  ***********

On 12/2/2003 at 2:09 AM Denis Fedorishenko wrote:

>Hello Denis,
>
>Tuesday, December 2, 2003, 2:03:24 AM, you wrote:
>
>I look, there is no another insmod.sh :D i was thinking something
>similar for 2.6
>
>Also just as note, still when i am loading skystar2 i am getting this
>message (write error), but everything work fine. If this need, i can
>look at daytime model of card and chip (it is on remote site).
>
>DF> Hello Augusto,
>
>DF> Tuesday, December 2, 2003, 1:47:28 AM, you wrote:
>
>DF> Yes, thanks
>DF> It was mistake on insmod.sh
>
>DF> Is patch correct? maybe another insmod.sh need same
>
>
>AC>> Hi!
>
>AC>> Do you know what version do you have of the Skystar2?
>
>AC>> In any case, you need to load the module mt312.o
>
>AC>> 	Augusto
>
>AC>> *********** REPLY SEPARATOR  ***********
>
>AC>> On 12/2/2003 at 1:31 AM Denis Fedorishenko wrote:
>
>>>>Hello linux-dvb,
>>>>
>>>>I am tried to use new demux code, but got problem on SkyStar-2 now.
>>>>Before 1.0.1 working well, but some packetloss and unstable on network
>>>>side.
>>>>
>>>>./getlinks
>>>>make
>>>>./insmod.sh load
>>>>
>>>>Linux video capture interface: v1.00
>>>>saa7146: register extension 'dvb'.
>>>>saa7146: register extension 'budget dvb'.
>>>>saa7146: register extension 'budget_ci dvb'.
>>>>saa7146: register extension 'budget dvb /w video in'.
>>>>usb.c: registered new driver Technotrend/Hauppauge USB-Nova
>>>>PCI: Found IRQ 9 for device 01:0b.0
>>>>PCI: Sharing IRQ 9 with 00:1f.4
>>>>skystar2.c: FlexCopIIB(rev.195) chip found
>>>>DVB: registering new adapter (Technisat SkyStar2 driver).
>>>>master_xfer: write error 0 !
>>>>message 0: flags=0x0, addr=0x68, buf[0]=0x2, len=2
>>>>master_xfer: read error !
>>>>message 2: flags=0x0, addr=0x68, buf=0x83, len=2
>>>>master_xfer: read error !
>>>>message 2: flags=0x0, addr=0x1, buf=0x83, len=65099
>>>>
>>>>root@patohome:~/DVB/dvb-kernel/build-2.4# lsmod
>>>>Module                  Size  Used by    Not tainted
>>>>skystar2               19080   0  (unused)
>>>>dvb-ttusb-budget       21644   0  (unused)
>>>>ttpci-eeprom            1840   0
>>>>saa7146_vv             33572   0
>>>>saa7146                10900   0  [saa7146_vv]
>>>>grundig_29504-491       3712   0
>>>>grundig_29504-401       4264   0
>>>>tda1004x                9124   0
>>>>ves1820                 4832   0
>>>>stv0299                 7816   0  (unused)
>>>>alps_tdmb7              3972   0
>>>>alps_tdlb7              5556   0
>>>>ves1x93                 4996   0
>>>>dvb-core               38892   0  [skystar2 dvb-ttusb-budget
>>>>grundig_29504-491 grundig_29504-401 tda1004x ves1820 stv0299 alps_tdmb7
>>>>alps_tdlb7 ves1x93]
>>>>video-buf              11376   0  [saa7146_vv]
>>>>v4l2-common             2752   0  [saa7146_vv]
>>>>v4l1-compat            11556   0  [saa7146_vv]
>>>>videodev                5664   0  [saa7146_vv]
>>>>input                   3200   0
>>>>iptable_filter          1644   0  (autoclean) (unused)
>>>>ip_tables              12288   1  [iptable_filter]
>>>>uhci                   24496   0  (unused)
>>>>usbcore                58400   1  [dvb-ttusb-budget uhci]
>>>>8139too                15240   1
>>>>mii                     2304   0  [8139too]
>>>>crc32                   2880   0  [8139too]
>>>>pcmcia_core            40032   0
>>>>ide-scsi                9424   0
>>>>agpgart                39576   0  (unused)
>>>>
>>>>If need, i can attach my .config of kernel.
>>>>Kernel - vanilla 2.4.22
>>>>
>>>>01:0b.0 Network controller: Techsan Electronics Co Ltd B2C2 Sky2PC PCI
>>>>[SkyStar2] (rev 02)
>>>>        Subsystem: Techsan Electronics Co Ltd B2C2 Sky2PC PCI [SkyStar2]
>>>>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>>>>ParErr- Stepping- SERR+ FastB2B-
>>>>        Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
>>>><TAbort- <MAbort- >SERR- <PERR-
>>>>        Latency: 32
>>>>        Interrupt: pin A routed to IRQ 9
>>>>        Region 0: Memory at ff8f0000 (32-bit, non-prefetchable)
>[size=64K]
>>>>        Region 1: I/O ports at df80 [size=32]
>>>>
>>>>
>>>>-- 
>>>>Best regards,
>>>> Denis                          mailto:nuclearcat@nuclearcat.com
>>>>
>>>>
>>>>
>>>>-- 
>>>>Info:
>>>>To unsubscribe send a mail to ecartis@linuxtv.org with
>>>>"unsubscribe linux-dvb" as subject.
>
>
>
>
>
>
>
>
>
>
>
>-- 
>Best regards,
> Denis                            mailto:nuclearcat@nuclearcat.com
>
>
>
>-- 
>Info:
>To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe linux-dvb" as subject.





-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe linux-dvb" as subject.