Stephan Weber wrote:
Hi,
using my DVB-S card I face the following problem:
During boot up my dvb driver is loaded and everything seems to be just
fine.
Afterwards I can't use it because /dev/dvb/adapter0/dvr0 doesn't deliver
anything at all. No wonder using xine or vdr doesn't work.
Doing just a reboot everything just works like a charm (I use this
"feature"
for over three month now and it is always acting like this....)
Here's my setup:
I'm using kernel 2.6.2rc (now - before I used various 2.6.0pre kernels,
2.6.0
and 2.6.1) and the included dvb drivers.
Loading the modules produces the following dmesg (on first startup and on
reboot):
saa7146: register extension 'budget_ci dvb'.
PCI: Enabling device 0000:00:0c.0 (0004 -> 0006)
saa7146: found saa7146 @ mem e191f000 (revision 1, irq 11) (0x13c2,0x100f).
DVB: registering new adapter (TT-Budget/WinTV-NOVA-CI PCI).
TT-Budget/WinTV-NOVA-CI PCI adapter 0 has MAC addr = 00:d0:5c:20:d8:42
probe_tuner: try to attach to TT-Budget/WinTV-NOVA-CI PCI
drivers/media/dvb/frontends/stv0299.c: setup for tuner SU1278/SH
DVB: registering frontend 0:0 (STV0299/TSA5059/SL1935 based)...
lspci reports my card as:
00:0c.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: Technotrend Systemtechnik GmbH: Unknown device 100f
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at d4000000 (32-bit, non-prefetchable) [size=512]
It is a Hauppauge Nova-S (budget) card.
Could anyone point me to the underlying problem? I could also accept
some kind of reinitialization (instead of a reboot).
Kind regards,
Stephan
Hallo Stephan,
seit ich mich einen neuen Rechner erlaubt habe treffe ich das gleiche
Problem.
Statt Neustarten mache ich "unload and load" von DVB-Treibern, manchmal
sogar mehrmals. Ich bin an der Idee gekommen, dass die Ursache die meine
Kombination von Hardware und Kernel ist. Sie ist:
- i845Gx(VGA-onboard)
- LAN onboard
- SOUND onboard
- AMI-BIOS (MSI-MB)
- P IV 2.4GHz, FSB533
- Kernel 2.4.22, 2.4.24
- DVB-drivers - die letzte von www.linuxtv.org
- OS - SuSE Linux 8.2
Es ist etwas bestimmt mit Linux verbindet(Kernel oder DVB-driver), weil mit
W$N alles läuft problemlos.
Um eine laufende Kombination zu entdecken, habe ich alle mögliche
BIOS-Einstellungskombinationen ausprobiert, bis jetzt ohne Erfolg.
Was für ein Rechner hast du?
Mit freundlichen Grüßen: Ivan