[linux-dvb] tt dvb-s 1.5

["Alex Golks" <master.of.brainless.things@gmx.net>]

i've bought a original tt card, a week ago. 
but it don't want to run:

----------

# uname -a
Linux gockels1 2.6.1 #5 Wed Feb 4 14:49:15 CET 2004 i686 GNU/Linux
# dmesg
...
saa7146: register extension 'dvb'.
saa7146: found saa7146 @ mem d08b3600 (revision 1, irq 11) (0x13c2,0x0000).
DVB: registering new adapter (Siemens/Technotrend/Hauppauge PCI rev1.3).
Siemens/Technotrend/Hauppauge PCI rev1.3 adapter 0 has MAC addr =
00:d0:5c:03:29:97
probe_tuner: try to attach to Siemens/Technotrend/Hauppauge PCI rev1.3
/usr/src/dvb-kernel/build-2.6/stv0299.c: setup for tuner BSRU6, TDQB-S00x
DVB: registering frontend 0:0 (STV0299/TSA5059/SL1935 based)...
DVB: AV7111(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261a
DVB: AV7111(0) - firmware supports CI link layer interface
av7110(0): Crystal audio DAC detected
videodev: "av7110" has no release callback. Please fix your driver for
proper sysfs support, see http://lwn.net/Articles/36850/
saa7146_vv: saa7146 (0): registered device video0 [v4l2]
av7110: found av7110-0.
...
# lspci00:00.0 Host bridge: Silicon Integrated Systems [SiS] 735 Host (rev
01)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS 530 Virtual
PCI-to-PCI bridge (AGP)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513
00:02.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller
(rev 07)
00:02.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller
(rev 07)
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound
Controller (rev a0)
00:03.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100
Ethernet (rev 90)
00:0b.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 46)
00:0d.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
01:00.0 VGA compatible controller: nVidia Corporation NV25 [GeForce4 Ti
4200] (rev a3)
#./scan ./scan dvb-s/Astra-19.2E > channels.conf
scanning dvb-s/Astra-19.2E
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 12551500 V 22000000 5
>>> tune to: 12551:v:0:22000
WARNING: >>> tuning failed!!!
>>> tune to: 12551:v:0:22000 (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.

----------

i used the linuxtv-dvb-1.0.1 CVS drivers and apps. made it with the
./makelinks script, because i'm running a 2.6.1. firmware is build in (yes, the right
one). 
drivers that i load at start:
dvb_ttpci -> for the card
stv0299 -> for some dvb-s tuners
the tuner driver is the only one, which gets "connection", but the scan
fails.
the same, when module is build in, with firmware, without, loaded
seperatly...

perhaps i made somthing wrong? i've read many (really many) faqs, and probed
even more hours with kernel-builds, driver-builds, etc.
but this prob seems to be new!?

or should i just take a 2.4.XX kernel, for that should be more reliable?!

i would be very, very grateful, cause that card wasnt cheap (alike nova
dvb-s)

regards, 
Alex

-- 
GMX ProMail (250 MB Mailbox, 50 FreeSMS, Virenschutz, 2,99 EUR/Monat...)
jetzt 3 Monate GRATIS + 3x DER SPIEGEL +++ http://www.gmx.net/derspiegel +++



-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe linux-dvb" as subject.