Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[linux-dvb] Re: AW: Re: AW: AW: Re: Avermedia 771 on Gentoo
Hmmm. Still not getting anywhere (!!!)
Can I just confirm the kernel config? I am under the impression I need to add:
--- Video Adapters │ │
│ │ <M> BT848 Video For Linux │ │
│ │ < > Mediavision Pro Movie Studio Video For Linux │ │
│ │ < > Quickcam BW Video For Linux │ │
│ │ < > QuickCam Colour Video For Linux (EXPERIMENTAL) │ │
│ │ < > CPiA Video For Linux │ │
│ │ < > SAA5246A Teletext processor │ │
│ │ < > SAA5249 Teletext processor │ │
│ │ < > SAB3036 tuner │ │
│ │ < > Stradis 4:2:2 MPEG-2 video driver (EXPERIMENTAL) │ │
│ │ < > Zoran ZR36057/36067 Video For Linux │ │
│ │ < > Philips SAA7134 support │ │
│ │ <M> Siemens-Nixdorf 'Multimedia eXtension Board' │ │
│ │ < > Philips-Semiconductors 'dpc7146 demonstration board' │ │
│ │ < > Hexium HV-PCI6 and Orion frame grabber │ │
│ │ < > Hexium Gemini frame grabber │ │
│ │ < > Conexant 2388x (bt878 successor) support
Now, do I need the <M> BT848 Video For Linux ? This ONLY appears after I have selected <M> Siemens-Nixdorf 'Multimedia eXtension Board', which doesn’t seem right.
If I don’t select either of these video adaptors, the kernel builds OK. If they are selected, I get the following error:
CC [M] drivers/media/video/tea6415c.o
CC [M] drivers/media/video/tea6420.o
CC [M] drivers/media/video/mxb.o
drivers/media/video/mxb.c: In function `mxb_probe':
drivers/media/video/mxb.c:186: error: too many arguments to function `saa7146_i2c_adapter_prepare'
make[3]: *** [drivers/media/video/mxb.o] Error 1
make[2]: *** [drivers/media/video] Error 2
make[1]: *** [drivers/media] Error 2
make: *** [drivers] Error 2
If I don’t include the "BT848 Video For Linux" driver, I don’t get the option of adding the Nebula/Pinnacle PCTV/Twinhan PCI cards in the DVB section. Something doesn't feel right...
Thanks for the help,
Ben
-----Original Message-----
From: linux-dvb-bounce@linuxtv.org [mailto:linux-dvb-bounce@linuxtv.org] On Behalf Of Andreas Witte
Sent: 13 July 2004 11:41
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] AW: Re: AW: AW: Re: Avermedia 771 on Gentoo
Hi Ben.
I do it exactly as you wrote. But i used the latest dvb-kernel cvs-sources.
Maybe this is why you cant find the mt352-module?
Look here:
http://linuxtv.org/cgi-bin/cvsweb.cgi/dvb-kernel/linux/drivers/media/dvb/fro
ntends/mt352.c?rev=1.7&content-type=text/x-cvsweb-markup
Hope that helps a bit.
Regards,
Andreas
-----Ursprüngliche Nachricht-----
Von: linux-dvb-bounce@linuxtv.org
[mailto:linux-dvb-bounce@linuxtv.org]Im Auftrag von Ben Rometsch
Gesendet: Dienstag, 13. Juli 2004 12:13
An: linux-dvb@linuxtv.org
Betreff: [linux-dvb] Re: AW: AW: Re: Avermedia 771 on Gentoo
Hi Andreas,
Can you explain what the order of patching was? I am presuming you went:
1. Unpack 2.6.7 kernel
2. Download and apply dvb-kernel makelinks script (is this correct? What version of dvb-kernel?) 3. Apply the bytesex patch 4. Configure and build kernel
I am assuming step 2 - I ran 1 then 3 and realised that there was no "Zarlink MT352 based" option in the Digital Video Broadcasting Devices section of the kernel?
Thanks,
Ben
-----Original Message-----
From: linux-dvb-bounce@linuxtv.org [mailto:linux-dvb-bounce@linuxtv.org] On Behalf Of Andreas Witte
Sent: 13 July 2004 06:49
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] AW: AW: Re: Avermedia 771 on Gentoo
Hi All...
I managed it to work partially. Now i can tune and everything works fine...
I used the patch on a 2.6.7 gentoo kernel:
http://dl.bytesex.org/patches/2.6.7-1/
applied the patch-2.6.7-kraxel.gz - Archive to that Kernel. Now bttv realize that right card. Tuning works nice except one small thing:
I can tune any frequencies, except 177500000(VHF) and 191500000(VHF). If i try i get following:
***
using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0'
tuning to 191500000 Hz
video pid 0x00c9, audio pid 0x00ca
status 00 | signal 97a5 | snr 0000 | ber 00000000 | unc 00000000 | status 05
| signal 97a5 | snr 0000 | ber 00000000 | unc 00000000 | status 05 |
| signal
97a5 | snr 0000 | ber 00000000 | unc 00000000 | status 05 | signal 97a5 | snr 0000 | ber 00000000 | unc 00000000 | status 05 | signal 97a5 | snr 0000
| ber 00000000 | unc 00000000 | status 05 | signal 97a5 | snr 0000 | ber
00000000 | unc 00000000 | status 05 | signal 97a5 | snr 0000 | ber 00000000
| unc 00000000 | status 05 | signal 97a5 | snr 0000 | ber 00000000 | unc
00000000 | status 05 | signal 97a5 | snr 0000 | ber 00000000 | unc 00000000
|
***
The frequencies 506000000 and above all working fine. The card should also able to tune on the VeryHiFrequencies (VHF) it looks to me that only the UHV-Band is used in the driver.
Any idea!? I dunno if its right in the linuxtv-mailinglist, i could imagine that this is some bug elsewhere!? Im not sure...
Thanks alot for any help.
Time to bed now, since i fizzle around with that the whole night... =)
Regards,
Andreas
-----Ursprüngliche Nachricht-----
Von: linux-dvb-bounce@linuxtv.org
[mailto:linux-dvb-bounce@linuxtv.org]Im Auftrag von Andreas Witte
Gesendet: Montag, 12. Juli 2004 23:47
An: linux-dvb@linuxtv.org
Betreff: [linux-dvb] AW: AW: Re: Avermedia 771 on Gentoo
Here is the messages that i get when i try to load the mt352 module:
***
attach: checking "bt878 #0 [sw]"
find by pci: checking "bt878 #0 [sw]"
attach: "bt878 #0 [sw]", to card 0
attach: checking "SMBus Via Pro adapter at 5000"
attach: checking "ISA main adapter"
DVB: registering new adapter (Ave).
i2c_adapter i2c-0: sendbytes: error - bailout.
i2c_adapter i2c-0: sendbytes: error - bailout.
mt352_read_register: readreg error (ret == -14)
***
Here i stuck...
Thanks for any help in advance..
Andreas
-----Ursprüngliche Nachricht-----
Von: linux-dvb-bounce@linuxtv.org
[mailto:linux-dvb-bounce@linuxtv.org]Im Auftrag von Andreas Witte
Gesendet: Montag, 12. Juli 2004 23:37
An: linux-dvb@linuxtv.org
Betreff: [linux-dvb] AW: Re: Avermedia 771 on Gentoo
Hello List.
Hours ago i also bought such AverMedia 771 and try to get it to work with my gentoo Box. Im using a 2.6.6 Kernel. This is my second card in this pc. I have a technotrend up and running and want to give a dual-dvb a try. It seems that i cant load the mt352 module.
This is a part of dmesg after loading the relevant modules:
****
Linux video capture interface: v1.00
bttv: driver version 0.9.14 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:00:06.0, irq: 10, latency: 32, mmio:
0xde001000
bttv0: subsystem: 1461:0771 (UNKNOWN)
please mail id, board name and the correct card= insmod option to kraxel@bytesex.org
bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00f0ff0f [init]
bttv0: using tuner=-1
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: registered device video0
bttv0: registered device vbi0
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
bt878(0): Bt878 (rev 17) at 00:06.1, irq: 10, latency: 32, memory:
0xde002000
***
I miss the line
bttv0: i2c: checking for MT352 @ ... or am i wrong here?
I get an error while im loading the mt352 module. But i cant find it in dmesg anymore... ;( I repost once i find it.
The patch that is applied in this thread wont work for me, maybe its already in cvs since im using the today's grab from it.
Any suggestions?
Thanks for help,
Andreas
-----Ursprüngliche Nachricht-----
Von: linux-dvb-bounce@linuxtv.org
[mailto:linux-dvb-bounce@linuxtv.org]Im Auftrag von Dirk Meyer
Gesendet: Montag, 12. Juli 2004 21:04
An: Ben Rometsch
Cc: linux-dvb@linuxtv.org
Betreff: [linux-dvb] Re: Avermedia 771 on Gentoo
Ben Rometsch wrote:
> Hi There,
>
> I'm new to the list, but, having read through the list and searched
> the gentoo forums, am unable to get my Avermedia 771 card working on
> my gentoo box.
>
> I have a gentoo-dev-sources 2.6.5r1 kernel running.
I'm using gentoo-dev-sources 2.6.7
> Grabbed a CVS snapshot of the linuxtv-dvb dated 2004-06-21
I have 2004-06-18 I guess. This version needs a patch I send to this list but I don't know if it's in cvs or not. I attached it to this mail, it should fix tuning problems (at least it does for me).
Dischi
Home |
Main Index |
Thread Index