[linux-dvb] Re: Avermedia DVB-T

[Andreaz@t-online.de (Andreas Witte)]

Hello All !

I try to build that all again from scratch with a new fresh 2.6.7 kernel.
I do that cause i thought about building a small manual for installing and
trying to get the remote control to work.
But what should i say? Im again stuck at a mt352-Problem.

mt352_read_register : readreg error (ret == -121)
mt352_read_register : readreg error (ret == -5)

What ive done so far:

Get a new fresh 2.6.7-Kernel. Then i patched it with the kraxel-2.6.7-1
patch.
Get a fresh dvb-kernel cvs-grab and start the ./makelinks script in the
maindir (of dvb-kernel).
Then i build the kernel as usual (with the desired enabled optiones).

I remember ive got this error while my first try, but i cant remember
what ive done against it.

Then:

# modprobe bttv

bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:00:08.0, irq: 10, latency: 32, mmio:
0xde002000
bttv0: detected: AVermedia DVB-T 771 [card=123], PCI subsystem ID is
1461:0771
bttv0: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00f2ff8f [init]
bttv0: using tuner=4
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 . ok
bttv0: add subdevice "dvb0"

# modprobe dvb_bt8xx

bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
bt878(0): Bt878 (rev 17) at 00:08.1, irq: 10, latency: 32, memory:
0xde003000
attach: checking "TT-Budget/WinTV-NOVA-T	 PCI"
attach: checking "SMBus Via Pro adapter at 5000"
attach: checking "ISA main adapter"
attach: checking "bt878 #0 [hw]"
find by pci: checking "bt878 #0 [hw]"
attach: "bt878 #0 [hw]", to card 0
DVB: registering new adapter (Ave).
mt352_read_register: readreg error (ret == -5)

# modprobe mt352

mt352_read_register : readreg error (ret == -121)
mt352_read_register : readreg error (ret == -5)

Any ideas? Yes, i also have also a WinTV-Nova inside the PC.

I cant understand what the cause is, that it wont work anymore, since i got
that
already. =((

Regards,
Andreas