Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[linux-dvb] Re: [PATCH] dvb-ttpci+budgetpatch integrated v33
HI
See I forgot to free demux, structures here's an update
version
Emard
diff -pur dvb-kernel.orig/linux/drivers/media/dvb/dvb-core/dvb_net.c dvb-kernel/linux/drivers/media/dvb/dvb-core/dvb_net.c
--- dvb-kernel.orig/linux/drivers/media/dvb/dvb-core/dvb_net.c 2004-12-13 14:34:55.000000000 +0100
+++ dvb-kernel/linux/drivers/media/dvb/dvb-core/dvb_net.c 2005-01-07 22:32:38.000000000 +0100
@@ -123,7 +123,7 @@ static void hexdump( const unsigned char
struct dvb_net_priv {
int in_use;
struct net_device_stats stats;
- char name[6];
+ char name[7];
u16 pid;
struct dvb_net *host;
struct dmx_demux *demux;
@@ -1157,19 +1157,29 @@ static int dvb_net_add_if(struct dvb_net
struct dvb_net_priv *priv;
int result;
int if_num;
-
+ char name[20];
+
+ memset(name, 0, sizeof(name));
+
if (feedtype != DVB_NET_FEEDTYPE_MPE && feedtype != DVB_NET_FEEDTYPE_ULE)
return -EINVAL;
if ((if_num = get_if(dvbnet)) < 0)
return -EINVAL;
- net = alloc_netdev(sizeof(struct dvb_net_priv), "dvb",
+ sprintf(name, "dvb%1d%1d%1d",
+ dvbnet->dvbdev->adapter->num, dvbnet->dvbdev->id, if_num);
+ /* compatibility fix to keep dvb0_0 format */
+ if(name[4] == '0')
+ name[4] = '_';
+
+ net = alloc_netdev(sizeof(struct dvb_net_priv), name,
dvb_net_setup);
if (!net)
return -ENOMEM;
- sprintf(net->name, "dvb%d_%d", dvbnet->dvbdev->adapter->num, if_num);
-
+ sprintf(net->name, "%s", name);
+ printk("dvb_net: created network interface %s\n", net->name);
+
net->addr_len = 6;
memcpy(net->dev_addr, dvbnet->dvbdev->adapter->proposed_mac, 6);
@@ -1211,6 +1221,7 @@ static int dvb_net_remove_if(struct dvb_
dvb_net_stop(net);
flush_scheduled_work();
+ printk("dvb_net: removed network interface %s\n", net->name);
unregister_netdev(net);
dvbnet->state[num]=0;
dvbnet->device[num] = NULL;
diff -pur dvb-kernel.orig/linux/drivers/media/dvb/ttpci/av7110.c dvb-kernel/linux/drivers/media/dvb/ttpci/av7110.c
--- dvb-kernel.orig/linux/drivers/media/dvb/ttpci/av7110.c 2004-12-31 16:34:44.000000000 +0100
+++ dvb-kernel/linux/drivers/media/dvb/ttpci/av7110.c 2005-01-07 23:32:10.000000000 +0100
@@ -66,6 +66,10 @@
#include "av7110_av.h"
#include "av7110_ca.h"
#include "av7110_ipack.h"
+#define TS_WIDTH (376)
+#define TS_HEIGHT (512)
+#define TS_BUFLEN (TS_WIDTH*TS_HEIGHT)
+#define TS_MAX_PACKETS (TS_BUFLEN/TS_SIZE)
int av7110_debug;
@@ -76,6 +80,7 @@ static int adac = DVB_ADAC_TI;
static int hw_sections;
static int rgb_on;
static int volume = 255;
+static int budgetpatch = 0;
module_param_named(debug, av7110_debug, int, 0644);
MODULE_PARM_DESC(debug, "debug level (bitmask, default 0)");
@@ -92,6 +97,8 @@ MODULE_PARM_DESC(rgb_on, "For Siemens DV
" signal on SCART pin 16 to switch SCART video mode from CVBS to RGB");
module_param(volume, int, 0444);
MODULE_PARM_DESC(volume, "initial volume: default 255 (range 0-255)");
+module_param(budgetpatch, int, 0444);
+MODULE_PARM_DESC(budgetpatch, "use budget-patch hardware modification: default 0 (0 no, 1 autodetect, 2 always)");
static void restart_feeds(struct av7110 *av7110);
@@ -1136,11 +1143,120 @@ static int av7110_diseqc_send_burst(stru
return 0;
}
+/* By Emard:
+ * copy/pasted those budget routines from
+ * budget-core.c with struct names slightly accomodated.
+ * I would link it in makefile with the budget-core.c
+ * but the struct's of av7110 and budget aren't yet
+ * interchangeable
+ */
+static int stop_ts_capture(struct av7110 *budget)
+{
+ dprintk(2, "budget: %p\n", budget);
+
+ if (--budget->feeding1)
+ return budget->feeding1;
+
+ saa7146_write(budget->dev, MC1, MASK_20); // DMA3 off
+ SAA7146_IER_DISABLE(budget->dev, MASK_10);
+ return 0;
+}
+
+static int start_ts_capture(struct av7110 *budget)
+{
+ struct saa7146_dev *dev = budget->dev;
+
+ dprintk(2, "budget: %p\n", budget);
+
+ if (budget->feeding1)
+ return ++budget->feeding1;
+
+ memset(budget->grabbing, 0x00, TS_HEIGHT * TS_WIDTH);
+
+ budget->tsf = 0xff;
+ budget->ttbp = 0;
+
+ saa7146_write(dev, MC1, (MASK_04 | MASK_20)); // DMA3 on
+
+ SAA7146_IER_ENABLE(budget->dev, MASK_10); // VPE
+
+ return ++budget->feeding1;
+}
+
+static int budget_start_feed(struct dvb_demux_feed *feed)
+{
+ struct dvb_demux *demux = feed->demux;
+ struct av7110 *budget = (struct av7110 *) demux->priv;
+ int status;
+
+ dprintk(2, "av7110: %p\n", budget);
+
+ spin_lock(&budget->feedlock1);
+ feed->pusi_seen = 0; /* have a clean section start */
+ status = start_ts_capture(budget);
+ spin_unlock(&budget->feedlock1);
+ return status;
+}
+
+static int budget_stop_feed(struct dvb_demux_feed *feed)
+{
+ struct dvb_demux *demux = feed->demux;
+ struct av7110 *budget = (struct av7110 *) demux->priv;
+ int status;
+
+ dprintk(2, "budget: %p\n", budget);
+
+ spin_lock(&budget->feedlock1);
+ status = stop_ts_capture(budget);
+ spin_unlock(&budget->feedlock1);
+ return status;
+}
+
+
+static void vpeirq(unsigned long data)
+{
+ struct av7110 *budget = (struct av7110 *) data;
+ u8 *mem = (u8 *) (budget->grabbing);
+ u32 olddma = budget->ttbp;
+ u32 newdma = saa7146_read(budget->dev, PCI_VDP3);
+
+ if(budgetpatch == 0)
+ {
+ printk("av7110.c: vpeirq() called while budgetpatch disabled!"
+ " check saa7146 IER register\n");
+ return;
+ }
+ /* nearest lower position divisible by 188 */
+ newdma -= newdma % 188;
+
+ if (newdma >= TS_BUFLEN)
+ return;
+
+ budget->ttbp = newdma;
+
+ if (budget->feeding1 == 0 || newdma == olddma)
+ return;
+
+#if 0
+ /* track rps1 activity */
+ printk("vpeirq: %02x Event Counter 1 0x%04x\n",
+ mem[olddma],
+ saa7146_read(budget->dev, EC1R) & 0x3fff );
+#endif
+
+ if (newdma > olddma) { /* no wraparound, dump olddma..newdma */
+ dvb_dmx_swfilter_packets(&budget->demux1, mem + olddma, (newdma - olddma) / 188);
+ } else { /* wraparound, dump olddma..buflen and 0..newdma */
+ dvb_dmx_swfilter_packets(&budget->demux1, mem + olddma, (TS_BUFLEN - olddma) / 188);
+ dvb_dmx_swfilter_packets(&budget->demux1, mem, newdma / 188);
+ }
+}
static int av7110_register(struct av7110 *av7110)
{
int ret, i;
struct dvb_demux *dvbdemux = &av7110->demux;
+ struct dvb_demux *dvbdemux1 = &av7110->demux1;
dprintk(4, "%p\n", av7110);
@@ -1200,6 +1316,37 @@ static int av7110_register(struct av7110
dvb_net_init(av7110->dvb_adapter, &av7110->dvb_net, &dvbdemux->dmx);
+ if(budgetpatch)
+ {
+ /* initialize software demux1 without its own frontend
+ * demux1 hardware is connected to frontend0 of demux0
+ */
+ dvbdemux1->priv = (void *) av7110;
+
+ dvbdemux1->filternum = 256;
+ dvbdemux1->feednum = 256;
+ dvbdemux1->start_feed = budget_start_feed;
+ dvbdemux1->stop_feed = budget_stop_feed;
+ dvbdemux1->write_to_decoder = NULL;
+
+ dvbdemux1->dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING |
+ DMX_MEMORY_BASED_FILTERING);
+
+ dvb_dmx_init(&av7110->demux1);
+
+ av7110->dmxdev1.filternum = 256;
+ av7110->dmxdev1.demux = &dvbdemux1->dmx;
+ av7110->dmxdev1.capabilities = 0;
+
+ dvb_dmxdev_init(&av7110->dmxdev1, av7110->dvb_adapter);
+
+ /* demux1 is without it's own frontend */
+
+ dvb_net_init(av7110->dvb_adapter, &av7110->dvb_net1, &dvbdemux1->dmx);
+ printk("dvb-ttpci: additional demux1 for budget-patch registered\n");
+
+ /* end software demux1 */
+ }
return 0;
}
@@ -1207,12 +1354,21 @@ static int av7110_register(struct av7110
static void dvb_unregister(struct av7110 *av7110)
{
struct dvb_demux *dvbdemux = &av7110->demux;
+ struct dvb_demux *dvbdemux1 = &av7110->demux1;
dprintk(4, "%p\n", av7110);
if (!av7110->registered)
return;
+ if (budgetpatch)
+ {
+ dvb_net_release(&av7110->dvb_net1);
+ dvbdemux->dmx.close(&dvbdemux1->dmx);
+ dvb_dmxdev_release(&av7110->dmxdev1);
+ dvb_dmx_release(&av7110->demux1);
+ }
+
dvb_net_release(&av7110->dvb_net);
dvbdemux->dmx.close(&dvbdemux->dmx);
@@ -1945,9 +2101,102 @@ static void frontend_init(struct av7110
static int av7110_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_data *pci_ext)
{
struct av7110 *av7110 = NULL;
+ int length = TS_WIDTH * TS_HEIGHT;
int ret = 0;
+ int count = 0;
dprintk(4, "dev: %p\n", dev);
+
+ /* Set RPS_IRQ to 1 to track rps1 activity.
+ * Enabling this won't send any interrupt to PC CPU.
+ */
+#define RPS_IRQ 0
+
+ if(budgetpatch == 1)
+ {
+ budgetpatch = 0;
+ /* autodetect the presence of budget patch
+ * this only works if saa7146 has been recently
+ * reset with with MASK_31 to MC1
+ *
+ * will wait for VBI_B event (vertical blank at port B)
+ * and will reset GPIO3 after VBI_B is detected.
+ * (GPIO3 should be raised high by CPU to
+ * test if GPIO3 will generate vertical blank signal
+ * in budget patch GPIO3 is connected to VSYNC_B
+ */
+
+ /* RESET SAA7146 */
+ saa7146_write(dev, MC1, MASK_31);
+ /* autodetection success seems to be time-dependend after reset */
+
+ /* Fix VSYNC level */
+ saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
+ /* set vsync_b triggering */
+ saa7146_write(dev, DD1_STREAM_B, 0);
+ /* port B VSYNC at rising edge */
+ saa7146_write(dev, DD1_INIT, 0x00000200);
+ saa7146_write(dev, BRS_CTRL, 0x00000000); // VBI
+ saa7146_write(dev, MC2,
+ 1 * (MASK_08 | MASK_24) | // BRS control
+ 0 * (MASK_09 | MASK_25) | // a
+ 1 * (MASK_10 | MASK_26) | // b
+ 0 * (MASK_06 | MASK_22) | // HPS_CTRL1
+ 0 * (MASK_05 | MASK_21) | // HPS_CTRL2
+ 0 * (MASK_01 | MASK_15) // DEBI
+ );
+
+ /* start writing RPS1 code from beginning */
+ count = 0;
+ /* Disable RPS1 */
+ saa7146_write(dev, MC1, MASK_29);
+ /* RPS1 timeout disable */
+ saa7146_write(dev, RPS_TOV1, 0);
+ WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_VBI_B));
+ WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
+ WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
+ WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
+#if RPS_IRQ
+ /* issue RPS1 interrupt to increment counter */
+ WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+#endif
+ WRITE_RPS1(cpu_to_le32(CMD_STOP));
+ /* Jump to begin of RPS program as safety measure (p37) */
+ WRITE_RPS1(cpu_to_le32(CMD_JUMP));
+ WRITE_RPS1(cpu_to_le32(dev->d_rps1.dma_handle));
+
+#if RPS_IRQ
+ /* set event counter 1 source as RPS1 interrupt (0x03) (rE4 p53)
+ * use 0x03 to track RPS1 interrupts - increase by 1 every gpio3 is toggled
+ * use 0x15 to track VPE interrupts - increase by 1 every vpeirq() is called
+ */
+ saa7146_write(dev, EC1SSR, (0x03<<2) | 3 );
+ /* set event counter 1 treshold to maximum allowed value (rEC p55) */
+ saa7146_write(dev, ECT1R, 0x3fff );
+#endif
+ /* Set RPS1 Address register to point to RPS code (r108 p42) */
+ saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
+ /* Enable RPS1, (rFC p33) */
+ saa7146_write(dev, MC1, (MASK_13 | MASK_29 ));
+
+ mdelay(10);
+ /* now send VSYNC_B to rps1 by rising GPIO3 */
+ saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
+ mdelay(10);
+ /* if rps1 responded by lowering the GPIO3,
+ * then we have budgetpatch hardware
+ */
+ if( (saa7146_read(dev, GPIO_CTRL) & 0x10000000) == 0)
+ {
+ budgetpatch |= 1;
+ printk("dvb-ttpci: BUDGET-PATCH DETECTED.\n");
+ }
+ /* Disable RPS1 */
+ saa7146_write(dev, MC1, ( MASK_29 ));
+#if RPS_IRQ
+ printk("dvb-ttpci: Event Counter 1 0x%04x\n", saa7146_read(dev, EC1R) & 0x3fff );
+#endif
+ }
/* prepare the av7110 device struct */
if (!(av7110 = kmalloc (sizeof (struct av7110), GFP_KERNEL))) {
@@ -1989,18 +2238,173 @@ static int av7110_attach(struct saa7146_
ttpci_eeprom_parse_mac(&av7110->i2c_adap, av7110->dvb_adapter->proposed_mac);
- saa7146_write(dev, PCI_BT_V1, 0x1c00101f);
- saa7146_write(dev, BCS_CTRL, 0x80400040);
+ if(budgetpatch)
+ {
+ if (NULL ==
+ (av7110->grabbing =
+ saa7146_vmalloc_build_pgtable(dev->pci, length, &av7110->pt)))
+ return -ENOMEM;
+ saa7146_write(dev, PCI_BT_V1, 0x1c1c101f);
+ saa7146_write(dev, BCS_CTRL, 0x80400040);
+ /* set dd1 stream a & b */
+ saa7146_write(dev, DD1_STREAM_B, 0x00000000);
+ saa7146_write(dev, DD1_INIT, 0x03000200);
+ saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26));
+ saa7146_write(dev, BRS_CTRL, 0x60000000);
+ saa7146_write(dev, BASE_ODD3, 0);
+ saa7146_write(dev, BASE_EVEN3, 0);
+ saa7146_write(dev, PROT_ADDR3, TS_WIDTH * TS_HEIGHT);
+ saa7146_write(dev, BASE_PAGE3, av7110->pt.dma | ME1 | 0x90);
+
+ saa7146_write(dev, PITCH3, TS_WIDTH);
+ saa7146_write(dev, NUM_LINE_BYTE3, (TS_HEIGHT << 16) | TS_WIDTH);
+
+ /* upload all */
+ saa7146_write(dev, MC2, 0x077c077c);
+ saa7146_write(dev, GPIO_CTRL, 0x000000);
+
+#if RPS_IRQ
+ /* set event counter 1 source as RPS1 interrupt (0x03) (rE4 p53)
+ * use 0x03 to track RPS1 interrupts - increase by 1 every gpio3 is toggled
+ * use 0x15 to track VPE interrupts - increase by 1 every vpeirq() is called
+ */
+ saa7146_write(dev, EC1SSR, (0x03<<2) | 3 );
+ /* set event counter 1 treshold to maximum allowed value (rEC p55) */
+ saa7146_write(dev, ECT1R, 0x3fff );
+#endif
- /* set dd1 stream a & b */
- saa7146_write(dev, DD1_STREAM_B, 0x00000000);
- saa7146_write(dev, DD1_INIT, 0x03000000);
- saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26));
-
- /* upload all */
- saa7146_write(dev, MC2, 0x077c077c);
- saa7146_write(dev, GPIO_CTRL, 0x000000);
+/* Original hardware design by Roberto Deza:
+ * There is a DVB_Wiki at
+ * http://212.227.36.83/linuxtv/wiki/index.php/Main_Page
+ * where is described this 'DVB TT Budget Patch', on Card Modding:
+ * http://212.227.36.83/linuxtv/wiki/index.php/DVB_TT_Budget_Patch
+ * On the short description there is also a link to a external file,
+ * with more details:
+ * http://perso.wanadoo.es/jesussolano/Ttf_tsc1.zip
+ *
+ * New software triggering design by Emard that works on
+ * original Roberto Deza's hardware:
+ *
+ * this rps1 code will copy internal HS event to GPIO3 pin.
+ * GPIO3 is in budget-patch hardware connectd to port B VSYNC
+ * HS is an internal event of 7146, accessible with RPS
+ * and temporarily raised high every n lines
+ * (n in defined in the RPS_THRESH1 counter threshold)
+ * I think HS is raised high on the beginning of the n-th line
+ * and remains high until this n-th line that triggered
+ * it is completely received. When the receiption of n-th line
+ * ends, HS is lowered.
+ *
+ * To transmit data over DMA, 7146 needs changing state at
+ * port B VSYNC pin. Any changing of port B VSYNC will
+ * cause some DMA data transfer, with more or less packets loss.
+ * It depends on the phase and frequency of VSYNC and
+ * the way of 7146 is instructed to trigger on port B (defined
+ * in DD1_INIT register, 3rd nibble from the right valid
+ * numbers are 0-7, see datasheet)
+ *
+ * The correct triggering can minimize packet loss,
+ * dvbtraffic should give this stable bandwidths:
+ * 22k transponder = 33814 kbit/s
+ * 27.5k transponder = 38045 kbit/s
+ * by experiment it is found that the best results
+ * (stable bandwidths and almost no packet loss)
+ * are obtained using DD1_INIT triggering number 2
+ * (Va at rising edge of VS Fa = HS x VS-failing forced toggle)
+ * and a VSYNC phase that occurs in the middle of DMA transfer
+ * (about byte 188*512=96256 in the DMA window).
+ *
+ * Phase of HS is still not clear to me how to control,
+ * It just happens to be so. It can be seen if one enables
+ * RPS_IRQ and print Event Counter 1 in vpeirq(). Every
+ * time RPS_INTERRUPT is called, the Event Counter 1 will
+ * increment. That's how the 7146 is programmed to do event
+ * counting in this budget-patch.c
+ * I *think* HPS setting has something to do with the phase
+ * of HS but I cant be 100% sure in that.
+ *
+ * hardware debug note: a working budget card (including budget patch)
+ * with vpeirq() interrupt setup in mode "0x90" (every 64K) will
+ * generate 3 interrupts per 25-Hz DMA frame of 2*188*512 bytes
+ * and that means 3*25=75 Hz of interrupt freqency, as seen by
+ * watch cat /proc/interrupts
+ *
+ * If this frequency is 3x lower (and data received in the DMA
+ * buffer don't start with 0x47, but in the middle of packets,
+ * whose lengths appear to be like 188 292 188 104 etc.
+ * this means VSYNC line is not connected in the hardware.
+ * (check soldering pcb and pins)
+ * The same behaviour of missing VSYNC can be duplicated on budget
+ * cards, by seting DD1_INIT trigger mode 7 in 3rd nibble.
+ */
+
+ /* Setup RPS1 "program" (p35) */
+ count = 0;
+ /* Wait Source Line Counter Threshold (p36) */
+ WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_HS));
+ /* Set GPIO3=1 (p42) */
+ WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
+ WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
+ WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTHI<<24));
+#if RPS_IRQ
+ /* issue RPS1 interrupt */
+ WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+#endif
+ /* Wait reset Source Line Counter Threshold (p36) */
+ WRITE_RPS1(cpu_to_le32(CMD_PAUSE | RPS_INV | EVT_HS));
+ /* Set GPIO3=0 (p42) */
+ WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
+ WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
+ WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
+#if RPS_IRQ
+ /* issue RPS1 interrupt */
+ WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+#endif
+ /* Jump to begin of RPS program (p37) */
+ WRITE_RPS1(cpu_to_le32(CMD_JUMP));
+ WRITE_RPS1(cpu_to_le32(dev->d_rps1.dma_handle));
+
+ /* Fix VSYNC level */
+ saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
+ /* Set RPS1 Address register to point to RPS code (r108 p42) */
+ saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
+ /* Set Source Line Counter Threshold, using BRS (rCC p43)
+ * It generates HS event every TS_HEIGHT lines
+ * this is related to TS_WIDTH set in register
+ * NUM_LINE_BYTE3 in budget-core.c. If NUM_LINE_BYTE
+ * low 16 bits are set to TS_WIDTH bytes (TS_WIDTH=2*188
+ *,then RPS_THRESH1
+ * should be set to trigger every TS_HEIGHT (512) lines.
+ */
+ saa7146_write(dev, RPS_THRESH1, (TS_HEIGHT*1) | MASK_12 );
+
+ /* Enable RPS1 (rFC p33) */
+ saa7146_write(dev, MC1, (MASK_13 | MASK_29));
+
+ /* end of budgetpatch register initialization */
+ }
+ else
+ {
+ saa7146_write(dev, PCI_BT_V1, 0x1c00101f);
+ saa7146_write(dev, BCS_CTRL, 0x80400040);
+
+ /* set dd1 stream a & b */
+ saa7146_write(dev, DD1_STREAM_B, 0x00000000);
+ saa7146_write(dev, DD1_INIT, 0x03000000);
+ saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26));
+
+ /* upload all */
+ saa7146_write(dev, MC2, 0x077c077c);
+ saa7146_write(dev, GPIO_CTRL, 0x000000);
+ }
+
+ if(budgetpatch)
+ {
+ spin_lock_init(&av7110->feedlock1);
+ }
+
+ tasklet_init (&av7110->vpe_tasklet, vpeirq, (unsigned long) av7110);
tasklet_init (&av7110->debi_tasklet, debiirq, (unsigned long) av7110);
tasklet_init (&av7110->gpio_tasklet, gpioirq, (unsigned long) av7110);
@@ -2115,6 +2519,10 @@ static int av7110_detach (struct saa7146
return 0;
}
+ tasklet_kill(&av7110->vpe_tasklet);
+ if(budgetpatch)
+ saa7146_pgtable_free(saa->pci, &av7110->pt);
+
av7110_exit_v4l(av7110);
av7110->arm_rmmod = 1;
@@ -2187,6 +2595,11 @@ static void av7110_irq(struct saa7146_de
//printk("av7110_irq: GPIO\n");
tasklet_schedule(&av7110->gpio_tasklet);
}
+
+ if (*isr & MASK_10)
+ {
+ tasklet_schedule(&av7110->vpe_tasklet);
+ }
}
@@ -2238,7 +2651,7 @@ static struct saa7146_extension av7110_e
.attach = av7110_attach,
.detach = av7110_detach,
- .irq_mask = MASK_19 | MASK_03,
+ .irq_mask = MASK_19 | MASK_03 | MASK_10,
.irq_func = av7110_irq,
};
Only in dvb-kernel/linux/drivers/media/dvb/ttpci: av7110.c~
diff -pur dvb-kernel.orig/linux/drivers/media/dvb/ttpci/av7110.h dvb-kernel/linux/drivers/media/dvb/ttpci/av7110.h
--- dvb-kernel.orig/linux/drivers/media/dvb/ttpci/av7110.h 2004-12-26 03:16:13.000000000 +0100
+++ dvb-kernel/linux/drivers/media/dvb/ttpci/av7110.h 2005-01-07 22:32:38.000000000 +0100
@@ -75,7 +75,7 @@ struct av7110 {
/* devices */
struct dvb_device dvb_dev;
- struct dvb_net dvb_net;
+ struct dvb_net dvb_net, dvb_net1;
struct video_device *v4l_dev;
struct video_device *vbi_dev;
@@ -152,12 +152,19 @@ struct av7110 {
ca_slot_info_t ci_slot[2];
int vidmode;
- struct dmxdev dmxdev;
- struct dvb_demux demux;
-
- struct dmx_frontend hw_frontend;
- struct dmx_frontend mem_frontend;
-
+ struct dmxdev dmxdev, dmxdev1;
+ struct dvb_demux demux, demux1;
+ spinlock_t feedlock1; /* for budget mode demux1 */
+ int feeding1;
+ u8 tsf;
+ u32 ttbp;
+ unsigned char *grabbing;
+ struct saa7146_pgtable pt;
+ struct tasklet_struct vpe_tasklet;
+
+ struct dmx_frontend hw_frontend, hw_frontend1;
+ struct dmx_frontend mem_frontend, mem_frontend1;
+
int fe_synced;
struct semaphore pid_mutex;
Home |
Main Index |
Thread Index