[linux-dvb] Re: dvb-bt8xx needs nxt6000, dst, sp887x and mt352 for loading?

[Olaf Bauer <olafbauer@freenet.de>]

> can you snap me the part of the kernel output while inserting the
> bttv-module?
> Im curios about if that module tells us that our card is equipped with an
> ir-rc.
> I remember far away, that i saw a message about it before, but anyhow this
> is
> gone. Im unsure if im right with that in remember.
>
> It still won't work for me... ,(

Hi Andreas,

bttv is automatically inserted at boot time; kernel output reads:

Jan 13 07:58:54 terra kernel: Linux video capture interface: v1.00
Jan 13 07:58:54 terra kernel: bttv: driver version 0.9.15 loaded
Jan 13 07:58:54 terra kernel: bttv: using 8 buffers with 2080k (520 pages) 
each for capture
Jan 13 07:58:54 terra kernel: bttv: Bt8xx card found (0).
Jan 13 07:58:54 terra kernel: ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 11 
(level, low) -> IRQ 11
Jan 13 07:58:54 terra kernel: bttv0: Bt878 (rev 17) at 0000:00:09.0, irq: 11, 
latency: 64, mmio: 0xdfdfd000
Jan 13 07:58:54 terra kernel: bttv0: detected: AVermedia DVB-T 771 [card=123], 
PCI subsystem ID is 1461:0771
Jan 13 07:58:54 terra kernel: bttv0: using: AVerMedia AVerTV DVB-T 771 
[card=123,autodetected]
Jan 13 07:58:54 terra kernel: bttv0: using tuner=4
Jan 13 07:58:54 terra kernel: bttv0: registered device video0
Jan 13 07:58:54 terra kernel: bttv0: registered device vbi0
Jan 13 07:58:54 terra kernel: bttv0: PLL: 28636363 => 35468950 .. ok
Jan 13 07:58:54 terra kernel: bttv0: add subdevice "remote0"
Jan 13 07:58:54 terra kernel: bttv0: add subdevice "dvb0"
Jan 13 07:58:54 terra kernel: bt878: AUDIO driver version 0.0.0 loaded
Jan 13 07:58:54 terra kernel: bt878: Bt878 AUDIO function found (0).
Jan 13 07:58:54 terra kernel: ACPI: PCI interrupt 0000:00:09.1[A] -> GSI 11 
(level, low) -> IRQ 11
Jan 13 07:58:54 terra kernel: bt878(0): Bt878 (rev 17) at 00:09.1, irq: 11, 
latency: 64, memory: 0xdfdfe000
...

modprobe dvb_core
modprobe dvb_bt8xx

Jan 13 07:59:21 terra kernel: DVB: registering new adapter (bttv0).
Jan 13 07:59:21 terra kernel: DVB: registering frontend 0 (Zarlink MT352 
DVB-T)...
...

modprobe lirc_gpio gpio_mask=0xf00f0 gpio_lock_mask=0x20 gpio_xor_mask=0xf00f0 
soft_gap=0 sample_rate=10

Jan 13 08:36:49 terra kernel: lirc_dev: IR Remote Control driver registered, 
at major 61 
Jan 13 08:36:49 terra kernel: lirc_gpio: no version for 
"lirc_unregister_plugin" found: kernel tainted.
Jan 13 08:36:49 terra kernel: lirc_dev: lirc_register_plugin:sample_rate: 10
Jan 13 08:36:49 terra kernel: lirc_gpio (0): driver registered
...

Hope it helps,
Olaf

>
> Regards and thank you alot,
> Andreas
>
>
> -----Original Message-----
> From: linux-dvb-bounce@linuxtv.org
> [mailto:linux-dvb-bounce@linuxtv.org]On Behalf Of Olaf Bauer
> Sent: Wednesday, January 12, 2005 5:57 PM
> To: linux-dvb@linuxtv.org
> Subject: [linux-dvb] Re: dvb-bt8xx needs nxt6000, dst, sp887x and mt352
> for loading?
>
> > Thank you for your tip. I will try it out after i compiled and setup
> > mythtv. I also have to load the ir-kbd-gpio modules from video4linux? Or
> > just lirc_gpio?
>
> I only need lirc_gpio and lirc_dev. The bttv and dvb modules must be loaded
> before. I use the card with VDR and the xine-plugin.