[vdr] Re: Video Disk Recorder version 0.97

[Joerg Riechardt <J.Riechardt@gmx.de>]

I also had that quite often with VDR 0.96 and driver 20010923

Jörg


> > Is there a known problem with the OSD "disappearing" after watching a
> > recording. Disappearing in this case means the the OSD is 1 char in height
> > and approx. 6-8 chars wide. This is observed on my machine with driver
> > 010921 and newer with VDR0.96 and VDR0.97. I haven't tested with older
> > drivers. With VDR0.95 everything is fine that way. Not tested with newer
> > driver upto now. I'll test that in lunch-break.
>
> I have seen this several times with 0.96. The workaround is to disable the
> feature "display the current action while replay" (or however it is
> called) in the setup menu.
>
> there must be something wrong with it. e.g. if you are replaying without
> the time bar, set some marks and jump to one of them (bringing the time
> bar on screen) then press 2 to start the cutting process, the time bar
> disappears, still showing the small pause status "  ||  " and puts the
> message "Schnittvorgang gestartet" into _this_ small OSD. (you just see
> the "Schni" or something likethat).
>    After that sometimes you get the "normal" OSD (with the OK or menu or
> whatever button),
>    but sometimes the OSD stays in the 1x6 (or 1x8) size
> until you restart vdr.