[vdr] Re: No timed recordings with vdr0.97 and dvb20010922

[christophackermann@t-online.de (Christoph Ackermann)]

Hello Klaus, hello list,

i have to revise my message below, because i think i have made a mistake
after updating to vdr-0.97 and a new channel.conf file. 
I ran over the timer menu and i didn't seen that two timed events
pointed to a radio channel without a VPID. Sorry!
But now i tested again combinations of DVB-20010922 and VDR-0.97/0.98
and IMHO, i find that DVB-20010922 is an ecellent choice, because it
produce no  glitches and distorsions(even in live mode), somtimes seen
with DVB-20010921.

  Christoph


Klaus Schmidinger schrieb:
> 
> Christoph Ackermann wrote:
> >
> > Hello list.
> >
> > I switched from vdr0.96 to vdr0.97; driver was 20010922 with stillframe
> > patch and with vdr0.96 all happens very well.
> > But with vdr0.97 you can't record via timer; instant recording runs ok.
> > Vdr tries to write data but theres no data from the driver - see logs
> > below. Sorry for only loglevel "2".
> > After about three minutes vdr initiates an 'emergency exit' and executes
> > a driver restart and so on.
> >
> > With driver 20010921 all works fine.
> 
> Looks like driver 2001-09-21 really was the last one that actually worked... :-(
> 
> Klaus
> 
> > [snip]
> >  kernel: dvb: 2 dvb(s) found!
> >  su: (to root) root on /dev/tty1
> >  PAM-unix2[13639]: session started for user root, service su
> >  vdr[13640]: VDR version 0.97 started
> >  vdr[13640]: loading /video0/setup.conf
> >  vdr[13640]: loading /video0/channels.conf
> >  vdr[13640]: loading /video0/timers.conf
> >  vdr[13640]: loading /video0/commands.conf
> >  vdr[13640]: loading /video0/keys-pc.conf
> >  vdr[13640]: found 2 video devices
> >  vdr[13640]: setting primary DVB to 1
> >  vdr[13640]: switching to channel 1
> >  vdr[13640]: SVDRP listening on port 2001
> >  vdr[13640]: timer 1 start
> >  vdr[13640]: switching to channel 4
> >  vdr[13640]: record /video0/arte-Archimedes/_/2001-10-30.19:00.90.90.rec
> >  vdr[13648]: ERROR: no useful data seen within 10486452 byte of video
> > stream
> >  vdr[13648]: initiating emergency exit
> >  vdr[13640]: emergency exit requested - shutting down
> >  vdr[13640]: saved setup to /video0/setup.conf
> >  vdr[13640]: exiting
> >  vdr[13640]: emergency exit!
> > [snip]
> 
> --
> _______________________________________________________________
> 
> Klaus Schmidinger                       Phone: +49-8635-6989-10
> CadSoft Computer GmbH                   Fax:   +49-8635-6989-40
> Hofmark 2                               Email:   kls@cadsoft.de
> D-84568 Pleiskirchen, Germany           URL:     www.cadsoft.de
> _______________________________________________________________

-- 
"... and all the hippies work for IBM or take control ..."
Joe Jackson - Big World, 1987