[vdr] Re: Problem with DVB-C

[Karlheinz.Pischke@t-online.de (Karlheinz Pischke)]

You are correct. I use only "Video Out"

Stephan Schreiber schrieb:
> 
> Did you get a picture on the SCART connector? I don't think so.
> Cinch out and overlay seem to work w/o problem, but neither RGB nor SVHS.
> I also live in Munich and my channels.conf is VERY up-to-date.
> 
> Thanks anyway.
> Stephan
> 
> > -----Original Message-----
> > From: vdr-bounce@linuxtv.org [mailto:vdr-bounce@linuxtv.org]On Behalf Of
> > Karlheinz Pischke
> > Sent: Wednesday, December 19, 2001 11:01 PM
> > To: vdr@linuxtv.org
> > Subject: [vdr] Re: Problem with DVB-C
> >
> >
> > I've installed dvb-0.9-2001117 with a DVB-C
> > It works for me.
> >
> > Initially I have not seen any picture, too.
> > The channel.conf.cable is a bit longish for e.g. Munich's
> > cable net. I have switched channels till I found the real
> > channels I can receive. It took me about 40-times switching
> > till I found the first ...
> >
> > Anyone interested in my channel.conf ? Then send an email to
> > kh@pischke.net (probably will respond next Saturday)
> >
> > Klaus Schmidinger schrieb:
> > >
> > > Harry wrote:
> > > >
> > > > 15.12.2001 18:16:59, Klaus Schmidinger
> > <Klaus.Schmidinger@cadsoft.de> wrote:
> > > >
> > > > >Harry wrote:
> > > > >I believe even with DVB-C you should get a picture after loading
> > > > >the driver, so as long as you don't get that, there may be no point
> > > > >in running VDR.
> > > > >
> > > > >>
> > > > >> >> Dec 14 17:47:57 harry kernel: i2c-core.o: i2c core module
> > > > >> >> Dec 14 17:47:57 harry kernel: Linux video capture
> > interface: v1.00
> > > > >> >> Dec 14 17:47:57 harry kernel: i2c-core.o: driver
> > VES1893 DVB demodulator registered.
> > > > >> >> Dec 14 17:47:57 harry kernel: i2c-core.o: driver
> > VES1820 DVB demodulator registered.
> > > > >> >> Dec 14 17:47:57 harry kernel: i2c-core.o: driver L64781
> > DVB demodulator registered.
> > > > >> >> Dec 14 17:47:57 harry kernel: init_SP8870:
> > > > >> >> Dec 14 17:47:57 harry kernel: i2c-core.o: driver SP8870
> > DVB demodulator registered.
> > > > >> >> Dec 14 17:47:57 harry kernel: i2c-core.o: driver
> > tda8083 DVB demodulator registered.
> > > > >> >> Dec 14 17:47:57 harry kernel: i2c-core.o: driver
> > stv0299 DVB demodulator registered.
> > > > >> >> Dec 14 17:47:57 harry kernel: i2c-core.o: driver i2c TV
> > tuner driver registered.
> > > > >> >> Dec 14 17:47:58 harry kernel: saa7146_core.o:
> > saa7146(1): bus:0, rev:1, mem:0xd8877000.
> > > > >> >> Dec 14 17:47:58 harry kernel: SP8870: no SP8870 found ...
> > > > >> >> Dec 14 17:47:58 harry kernel: i2c-core.o: adapter
> > saa7146(1) registered as adapter 0.
> > > > >> >> Dec 14 17:48:06 harry kernel: wait-for-debi-done maxwait: 500000
> > > > >> >> Dec 14 17:48:06 harry kernel: dvb: debi test in
> > bootarm() failed: 00000000 != 10325476
> > > > >> >> Dec 14 17:48:06 harry kernel: dvb0: AV7111879103707 -
> > firm 1d90c010, rtsl 00000000, vid 7000001b, app 00000000
> > > > >> >> Dec 14 17:48:06 harry kernel: dvb: 1 dvb(s) found!
> > > > >> >>
> > > >
> > > > when i see the /var/log/messages i think it works.
> > > >
> > > > >> >> Dez 14 17:51:17 harry vdr[1352]: VDR version 0.99 started
> > > > >> >> Dez 14 17:51:17 harry vdr[1352]: loading /video/setup.conf
> > > > >> >> Dez 14 17:51:17 harry vdr[1352]: ERROR:
> > /video/setup.conf: Datei oder Verzeichnis nicht gefunden
> > > > >> >> Dez 14 17:51:17 harry vdr[1352]: loading /video/keys-pc.conf
> > > > >> >> Dez 14 17:51:17 harry vdr[1352]: can't open
> > '/video/keys-pc.conf'
> > > > >> >> Dez 14 17:51:17 harry vdr[1352]: probing /dev/ost/frontend0
> > > > >> >> Dez 14 17:51:17 harry vdr[1352]: ERROR (dvbapi.c,3033):
> > Die Operation ist nicht erlaubt
> > > >
> > > >                                 is this my problem
> > > >
> > > > >> >> Dez 14 17:51:17 harry vdr[1354]: EIT processing thread
> > started (pid=1354) - master
> > > > >> >> Dez 14 17:51:17 harry vdr[1352]: probing /dev/ost/frontend1
> > > > >> >> Dez 14 17:51:17 harry vdr[1352]: found 1 video device
> > > > >> >> Dez 14 17:51:17 harry vdr[1352]: setting primary DVB to 1
> > > > >> >> Dez 14 17:51:17 harry vdr[1352]: SVDRP listening on port 2001
> > > > >> >> Dez 14 17:51:17 harry vdr[1352]: learning keys
> > > >
> > > > I have read there are a misstake to run the vdr on a Redhat
> > 7.1 system.
> > > > Is it correct ? (i have RH 7.1)
> > > >
> > > > >Did you copy the file 'channels.conf.cable' to
> > '/video/channels.conf'?
> > > > >
> > > > yes
> > > >
> > > > >Maybe your local cable setup is different from what comes with VDR's
> > > > >channels.conf.cable?
> > > > >
> > > > Germany Krefeld
> > > > I think it is the same.
> > > >
> > > > ps: i dont have a ci or ca module insert
> > > >
> > > > Harry
> > >
> > > You could try the driver version from 2001-09-21, available at
> > >
> > >   ftp://ftp.cadsoft.de/pub/people/kls/vdr/siemens_dvb-0.9-20010921.tgz
> > >
> > > I believe DVB-C support was broken pretty seriously after that
> > - and hasn't
> > > been repaired ever since...
> > >
> > > Klaus
> > > --
> > > _______________________________________________________________
> > >
> > > Klaus Schmidinger                       Phone: +49-8635-6989-10
> > > CadSoft Computer GmbH                   Fax:   +49-8635-6989-40
> > > Hofmark 2                               Email:   kls@cadsoft.de
> > > D-84568 Pleiskirchen, Germany           URL:     www.cadsoft.de
> > > _______________________________________________________________
> >
> > --
> >
> >
Gruß

Karlheinz