[vdr] AW: Re: ARM crashed while cutting, VDR watchdog timer failed.

[Gunter Niedermeier <linuxtv@ncs-online.de>]

Hi,
Hi Klaus,

you can easily produce an ARM crash by doing the following

1. Make a recording with a length about 2,5-3GB. (e.g. Pro7 Akte X)
2. Edit the recording to mark out the "Werbeblocks"
3. Cut out the marked blocks
4. When cutting has finished, replay the new file and jump between
   the marks with the 7 and 9 keys, jump with the yellow and green
   keys ( only for testing ) and you will see that ARM crashes.
   There is no way to get the vdr running correctly again, until
   you restart the complete DBV drivers and then the vdr.

I'm using a P3/450 with SuSE Kernel 2.4.10-4GB and reiserfs.

Bye

Guenter Niedermeier