Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[vdr] Re: thanks for channelsradio.conf, but...
Dave Chapman wrote:
>
> On Sunday 03 February 2002 11:15, Klaus Schmidinger wrote:
> > Well, I guess with VPID = 1 you are actually recording video data,
> > which I guess is not what you really want - or am I wrong here?
>
> As you know, the PID is a 13 bit value in the TS headers - i.e. in the range
> 0...8191. PIDs 0, 1 and 2 and 16-20 (and possibly other values) are reserved
> for the service information and will never contain video or audio (but will
> contain data).
>
> I would suggest that whatever special PID you reserve for "no video", you
> check for it when you are setting the filters and don't set a video filter on
> that PID. A PID of 0 would seem to be the easiest and also the most logical.
>
> Another thing to remember - the driver uses the dummy PID value of "8192" to
> get the entire TS from a budget card so you don't want to set that PID in
> normal use.
>
> Regards,
>
> Dave.
Using '0' would appear to be the most logical choice (having the real meaning
of "no video").
@Uwe Scheffler: can you confirm that your radio channels still work if you use
'0' instead of '1' or '8191'? Of course you will have to adapt the patch
accordingly, but I guess you already did that when using '1'...
Klaus
--
_______________________________________________________________
Klaus Schmidinger Phone: +49-8635-6989-10
CadSoft Computer GmbH Fax: +49-8635-6989-40
Hofmark 2 Email: kls@cadsoft.de
D-84568 Pleiskirchen, Germany URL: www.cadsoft.de
_______________________________________________________________
Home |
Main Index |
Thread Index