[vdr] Re: j2 connector (s-video output)

["Robert Schneider" <Robert.Schneider@de.ibm.com>]

I'm running my 1.3 card via S-Video and I'm using a 10m cable, I have no 
problems at all.




"Marton, Walter" <Walter.Marton@fme.fujitsu.com>
Sent by: vdr-bounce@linuxtv.org
19.02.2002 10:19
Please respond to vdr

 
        To:     "'vdr@linuxtv.org'" <vdr@linuxtv.org>
        cc: 
        Subject:        [vdr] Re: j2 connector (s-video output)

 

hello list,
I惴 fighting with the same problem after modifying
my Hauppauge 1.3 dvbs-card to S-Video output - 
running picture (bad syncro?) and unstable colors.
As far as it runs under Windows, I suppose it isn愒
a driver problem, but signal level - perhaps too low.
Does anybody make similar experience?
Has anybody the s-video-signal-level-specification of 
the dvb-card? Perhaps it needs only some buffering,
since my cable is 10m long...
Does Tobias Kerner find a solution for this problem?
thanks
Walter





-----Original Message-----
From: Thomas Mohr [mailto:tom23@web.de]
Sent: Sunday, January 27, 2002 9:36 PM
To: vdr@linuxtv.org
Subject: [vdr] Re: j2 connector (s-video output)


Tobias Kerner wrote:
> 
> hello,
> 
> I'm using dvb driver siemens_dvb-0.9-20011117.tgz from klaus's page. I
> edited the makefile and set vidmode=2. I made an s-video adapter for the
> J2 connector and connected it with the tv. when I swith to s-video on tv
> now I see a picture but it is very bad ('running' picture, dark). I'm
> sure that I've connected the cable right. Is there a problem with this
> driver version?
> 
> thanks,
> 
> tobi

Tobi,

if you use the SCART connection as displayed in some web pages, use
vidmode=3.

Regards,

 - Thomas

-- 
- - - - - - - - - - - - - - - - - 
Thomas Mohr - Th.Mohr@gmx.net