[vdr] Re: AW: hauppauge dvb-s / IR-control / vdr

[Rainer.Hattenhauer@t-online.de (Rainer Hattenhauer)]

Hello Gerrit

> And you must edit the Makefile (DVB-Dir/driver/lirc), because the entry
> is for lirc-0.6.4 and the path is wrong (in my case).
> Then you must compile the lirc driver of the dvb driver and you get a
> lirc_dvb.o
>
> I made two entrys in the runvdr script.
> "insmod lirc_dev" before loading the driver
> And "insmod lirc_dvb.o" after loading the driver, but before loading vdr

Thats what I made now, and it worked. But again no reaction, and now I stucked 
at this point:

> Did you create a lircd.conf? Irrecord doesn't work with the IR-receiver
> of the DVB-s. You must create a lircd.conf with the codes of
> /var/log/messages.
>

Thats my problem:

Original /etc/lircd.conf:
-------------------------------------------------------------------------
# This config file will work with both homebrew receivers and
# original Hauppauge TV cards !!!
#

begin remote

  name  Hauppauge
  bits           13
  flags SHIFT_ENC
  eps            30
  aeps          100

  one           950   830
  zero          950   830
  plead         960
  gap          89584
  repeat_bit      2

      begin codes
          TV                       0x000000000000100F
          RADIO                    0x000000000000100C
          FULL_SCREEN              0x000000000000102E
          CH+                      0x0000000000001020
          CH-                      0x0000000000001021
          VOL-                     0x0000000000001011
          VOL+                     0x0000000000001010
          MUTE                     0x000000000000100D
          SOURCE                   0x0000000000001022
          1                        0x0000000000001001
          2                        0x0000000000001002
          3                        0x0000000000001003
          4                        0x0000000000001004
          5                        0x0000000000001005
          6                        0x0000000000001006
          7                        0x0000000000001007
          8                        0x0000000000001008
          9                        0x0000000000001009
          0                        0x0000000000001000
          RESERVED                 0x000000000000101E
          MINIMIZE                 0x0000000000001026
      end codes

end remote
------------------------------------------------------------------

Messages in /var/log/messages:
Jul 12 18:21:36 august kernel: dvb: ircommand = 8000000f
Jul 12 18:21:36 august kernel: dvb: ircommand = 0000000f
Jul 12 18:21:38 august kernel: dvb: ircommand = 8000000c
Jul 12 18:21:38 august kernel: dvb: ircommand = 0000000c
Jul 12 18:21:41 august kernel: dvb: ircommand = 8000002e
Jul 12 18:21:41 august kernel: dvb: ircommand = 0000002e
Jul 12 18:21:47 august kernel: dvb: ircommand = 80000020
Jul 12 18:21:47 august kernel: dvb: ircommand = 00000020
Jul 12 18:21:49 august kernel: dvb: ircommand = 80000021
Jul 12 18:21:49 august kernel: dvb: ircommand = 00000021
Jul 12 18:21:52 august kernel: dvb: ircommand = 80000010
Jul 12 18:21:52 august kernel: dvb: ircommand = 00000010
Jul 12 18:21:55 august kernel: dvb: ircommand = 80000011
Jul 12 18:21:55 august kernel: dvb: ircommand = 00000011
Jul 12 18:22:00 august kernel: dvb: ircommand = 8000000d
Jul 12 18:22:00 august kernel: dvb: ircommand = 0000000d
Jul 12 18:22:04 august kernel: dvb: ircommand = 80000022
Jul 12 18:22:04 august kernel: dvb: ircommand = 00000022
Jul 12 18:22:07 august kernel: dvb: ircommand = 80000001
Jul 12 18:22:07 august kernel: dvb: ircommand = 00000001
Jul 12 18:22:08 august kernel: dvb: ircommand = 80000002
Jul 12 18:22:08 august kernel: dvb: ircommand = 00000002
Jul 12 18:22:09 august kernel: dvb: ircommand = 80000003
Jul 12 18:22:10 august kernel: dvb: ircommand = 00000003
Jul 12 18:22:11 august kernel: dvb: ircommand = 80000004
Jul 12 18:22:11 august kernel: dvb: ircommand = 00000004
Jul 12 18:22:12 august kernel: dvb: ircommand = 80000005
Jul 12 18:22:12 august kernel: dvb: ircommand = 00000005
Jul 12 18:22:13 august kernel: dvb: ircommand = 80000006
Jul 12 18:22:14 august kernel: dvb: ircommand = 00000006
Jul 12 18:22:15 august kernel: dvb: ircommand = 80000007
Jul 12 18:22:15 august kernel: dvb: ircommand = 00000007
Jul 12 18:22:17 august kernel: dvb: ircommand = 80000008
Jul 12 18:22:18 august kernel: dvb: ircommand = 00000008
Jul 12 18:22:19 august kernel: dvb: ircommand = 80000009
Jul 12 18:22:19 august kernel: dvb: ircommand = 00000009
Jul 12 18:22:22 august kernel: dvb: ircommand = 80000000
Jul 12 18:22:22 august kernel: dvb: ircommand = 00000000
Jul 12 18:22:24 august kernel: dvb: ircommand = 8000001e
Jul 12 18:22:24 august kernel: dvb: ircommand = 0000001e
Jul 12 18:22:26 august kernel: dvb: ircommand = 80000026
Jul 12 18:22:26 august kernel: dvb: ircommand = 00000026
-------------------------------------------------------------------------
(Buttons pressed in same order like in lircd.conf.)

How to transfer the numbers from /var/log/messages to /etc/lircd.conf ?
I`ve the impression that they are equal...

Greetings
                Rainer