Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[vdr] Re: AW: VDR shutdown problem
On Wed, 18 Sep 2002, Martin Geistreiter (MG) wrote:
MG> > > Any ideas?
MG> > > BTW: sometimes VDR shuts down sometimes not...
MG> >
MG> > > Regards,
MG> > > Andreas
MG>
MG> > I have similar problem, like reported in my mail " vdr occasionally
MG> > doesn't shut down" from 20.07.02
MG>
MG> > Jörg
MG>
MG> So do I.
MG> I also recognized that this happens if you press the shutdown button. If
MG> you press again it works; mostly. But the Timers for nvram-wakrup are
MG> not written then.
if you're both using nvram-wakeup, you should look at your logs, what
nvram-wakeup tells you. it can happen for example, that if the system time
is changed by vdr according to the time transmitted via EPG, the system
time differs by more than 5 minutes from the hardware clock (of course,
after taking time zone ito account). In that case nvram-wakeup will refuse
to set timers.
if that's the case, you should
1. ensure that your hardware clock is running correct time
2. choose one transponder, which you trust about time and set it
soemwhere in the setup
btw.: use -l option, if you want nvram-wakeup to redirect all output to
/var/log/messages
c ya
Sergei
--
--------------------------------------------------------------------
eMail: Sergei.Haller@math.uni-giessen.de
--------------------------------------------------------------------
Be careful of reading health books, you might die of a misprint.
-- Mark Twain
Home |
Main Index |
Thread Index