[vdr] Re: AW: Re: AW: Re: Sound problems with recordings from Pro.7

[Per Stĺlbrand <beppes@pp.sbbs.se>]

Hi,

Does your "Pro.7" have 2 AID?
I have the same problem when a channel has 2 AID, if i remove 1 the 
sound and picture is alright.

::beep

Oliver Friedrich wrote:
> Hi list,
> 
> have found the problem with the sound. The option "Dolby Digital and DTS
> over DVB" makes the garbage. Have deaktivated it and all was fine...
> This is also the error, if the sound of a DVD is wrong.
> 
> cu,
> Oliver
> 
> -----Ursprüngliche Nachricht-----
> Von: vdr-bounce@linuxtv.org [mailto:vdr-bounce@linuxtv.org]Im Auftrag
> von Rene Bartsch
> Gesendet: Donnerstag, 19. September 2002 13:11
> An: vdr@linuxtv.org
> Betreff: [vdr] Re: AW: Re: Sound problems with recordings from Pro.7
> 
> 
> 
> ----- Original Message -----
> From: "Oliver Friedrich" <oliver@familie-friedrich.de>
> To: <vdr@linuxtv.org>
> Sent: Thursday, September 19, 2002 8:34 AM
> Subject: [vdr] AW: Re: Sound problems with recordings from Pro.7
> 
> 
> 
>>Hi,
>>where can i see, if the recording is in AC3?
>>
>>Up to now i have not connected the DVB-s via digital out to my receiver,
> 
> but
> 
>>this will come in the near future. Small question to this: Can i directly
>>connect the Pin 4 of JP2 to the Digital-In of my receiver or need i some
>>electronic between them?
> 
> 
> It's critical. SPDIF is specified vor a voltage of 0.5 Volt, but pin4 uses
> 3V.
> This may damage your amplifier.
> 
> Rene
> 
> 
>>I have demuxed audio and video on my windows machine and then the sound is
>>ok (via media player). But i can't see, if the .vdr-file contains an AC3
>>stream, too ...
>>
>>cu,
>>Oliver
>>
>>-----Ursprüngliche Nachricht-----
>>Von: vdr-bounce@linuxtv.org [mailto:vdr-bounce@linuxtv.org]Im Auftrag
>>von Andreas Mair
>>Gesendet: Donnerstag, 19. September 2002 08:20
>>An: vdr@linuxtv.org
>>Betreff: [vdr] Re: Sound problems with recordings from Pro.7
>>
>>
>>Hi,
>>
>>On Wednesday 18 September 2002 22:48, Oliver Friedrich wrote:
>>
>>>Hi list,
>>>i have recorded "Buffy the vampire slayer" from Pro.7 tonight. But now i
>>>want to replay the recording and have only garbage on the audio output
> 
> of
> 
>>>my Siemens DVB-s 1.3
>>>
>>>What has happened? this is not the first recording, that has this
> 
> problem.
> 
>>>But it is allways on Pro.7
>>
>>Just a thought: do you record AC3 but don't have a receiver on digital
> 
> out?
> 
>>Well, at least here that's the case. If I have a AC3 playback and switch
> 
> my
> 
>>receiver to use analog input I hear garbage.
>>
>>Regards,
>>Andreas
>>
>>
>>
>>
>>>My system:
>>>P200MMX
>>>kernel 2.4.18 [mandrake 8.2 distribution]
>>>vdr 1.0.3 with AIO [don't know version]
>>>Siemens DVB-s 1.3
>>>
>>>
>>>Thanks in advance,
>>>Oliver
>>
>>
>>
>>
>>
> 
> 
> 
> 
>