Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[vdr] Re: automatic startup of vdr
Am Son, 2002-10-06 um 11.34 schrieb Christoph Rieder:
> Martin Theodor Grewe wrote:
> > Hi there!
> >
> > Christoph Rieder wrote:
> >
> >> vdr:4:respawn:/usr/local/bin/vdr --terminal=/dev/tty1 -v /opt/video
> >>
> >> this is IMHO the most elegant way. the problem is: how to load the DVB
> >> drivers? Following lines in /etc/modules.conf used to work:
> >>
> >> alias char-major-81 videodev
> >> alias char-major-81-0 dvb
> >> alias char-major-250 dvb
> >> options dvb init_chan=2 pids_off=0
> >> options saa7146_core mode=0
> >> below saa7146_core tuner tda8083 L64781 stv0299 VES1893 VES1820
> >> above saa7146_core saa7146_v4l
> >>
> >> unfortunately this seems to be broken. lsmod shows that all drivers
> >> are loaded, but when the firmware should get started and tune to ntv
> >> the screen stays black.
> >
> >
> > All drivers are loaded, but you've forgotten to load the firmware.
> > Try this:
> > cd </path/of/dvb/driver>
> > make insmod
> > n-tv is shown.
>
> thanks for the hint, but i allready fixed this one. if you put the
> Dparam and Root files in the directory defined by DVB_FIRM_PATH in
> dvb.h then the firmware can be loaded independetly of your working
> directory. i've tested this by insmoding all the drivers "by hand" and
> it works. but when i do a modprobe dvb (which pulls all the drivers) it
> does not work. any ideas??
>
Why so much work?
I just commented out tty1 in inittab and start the runvdr-script from
inittab with respawn on tty1 - works fine, especially when using a
IR-keyboard. You don't have to log in anymore
Rene
--
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe vdr" as subject.
Home |
Main Index |
Thread Index