[vdr] Re: where to place runvdr on suse 8.0

["Gerhard Steiner" <steiner@mail.austria.com>]

Hello,
thanks for all your help.
I will try to find the best solution after x-mas.

Gerhard

On Thu, 19 Dec 2002 23:40:47 +0100
 Eyck Jentzsch <Eyck@familie-jentzsch.de> wrote:
> Hi Gerhard,
> 
> I placed a script called vdr (see attachement) in the
> /etc/init.d 
> directory and created 2 links to it in /etc/init.d/rc3.d
> named S07vdr 
> and K15vdr (my linux box is running in rnlevel 3, which
> is network and 
> no X). For configuration the file /etc/sysconfig/vdr is
> used (attached 
> as sysconfig_vdr).
> So vdr starts right after network and syslog (it needs
> these two 
> services) and usually vdr is ready when the login prompt
> shows up.
> If you use this method, you have to remove the line in
> inittab
> 
> -Eyck
> 
> > Hello,
> > I am using runvdr to start vdr within my suse 8.0 as
> > described on Hubertus Sandmanns homepage.
> > -----------------------------</etc/inittab>-------------------------------
> > ...
> > vdr:235:once:/usr/local/bin/runvdr -s
> > /usr/local/bin/vdrshutdown
> > 
> > It seams, that loading the drivers and vdr is the last
> thing
> > that is done.
> > So it last very long till vdr is up and running.
> > Is there a better place to start runvdr, so that vdr is
> > starting earlier?
> > 
> > Thanks,
> > Gerhard
> > 
> 
> 
> 
> -- Attached file included as plaintext by Listar --
> -- File: vdr
> 
> #! /bin/sh
> # Copyright (c) 
> # All rights reserved.
> #
> # Author: 
> #
> # /etc/init.d/vdr
> #
> #   and symbolic its link
> #
> # /(usr/)sbin/rcvdr
> #
> # 
> # System startup script for vdr
> #
> ### BEGIN INIT INFO
> # Provides: vdr
> # Required-Start: $syslog
> # Required-Stop:  $syslog
> # Default-Start:  3 5
> # Default-Stop:   0 1 2 6
> # Description:    Starts vdr 
> ### END INIT INFO
> # 
> # Source SuSE config (if still necessary, most info has
> been moved)
> test -r /etc/rc.config && . /etc/rc.config
> 
> # Check for missing binaries (stale symlinks should not
> happen)
> VDR_BIN=/video/dvb/VDR/vdr
> test -x $VDR_BIN || exit 5
> 
> # Check for existence of needed config file and read it
> VDR_CONFIG=/etc/sysconfig/vdr
> test -r $VDR_CONFIG || exit 6
> . $VDR_CONFIG
> 
> . /etc/rc.status
> # First reset status of this service
> #rc_reset
> 
> case "$1" in
>   start)
> 	echo -n "Starting vdr"
> 	    #/sbin/hdparm -d 1 /dev/hda
> 	    #/sbin/hdparm -d 1 /dev/hdc
> 	    setserial /dev/ttyS0 uart none
> 	    modprobe lirc_serial
> 	    /usr/sbin/lircd
> 
>             /video/dvb/VDR/runvdr $VDR_ARGS &
> 	    /video/dvb/vdradmin-0.16/vdradmind.pl
> 	rc_status -v
> 	;;
>   stop)
> 	echo -n "Stopping vdr"
> 	    #kill -9 `cat /var/run/vdr.pid`
> 	    killall -TERM runvdr
> 	    sleep 1
> 	    killall -TERM vdr
> 	    sleep 1
> 	    cd /video/dvb/DVB/driver; make rmmod 2>&1 >
> /dev/null
> 
> 	    killall lircd
> 	    modprobe -r lirc_serial
> 	    #kill `cat /dvb/vdradmin/vdradmind.pid`
> 	    #/sbin/hdparm -d 0 /dev/hdb
> 	    #/sbin/hdparm -d 0 /dev/hda
> 	rc_status -v
> 	;;
>   *)
> 	N=/etc/init.d/vdr
> 	# echo "Usage: $N {start|stop|restart|reload|force-reload}"
> >&2
> 	echo "Usage: $N {start|stop|restart|force-reload}" >&2
> 	rc_exit=1
> 	;;
> esac
> 
> rc_exit
> 
> 
> -- Attached file included as plaintext by Listar --
> -- File: sysconfig_vdr
> 
> VDR_ARGS="-c /etc/vdr -w 30 -s /etc/vdr/shutdown.sh -o
> /etc/vdr/mount.sh -v /video/vol0 --terminal=/dev/tty8"
> 
> #VDR_ARGS="-C /dev/cdrom -c /etc/vdr -w 60 -s
> /etc/vdr/shutdown.sh -o /etc/mount.sh -M /etc/mplayer.sh
> -v /video/vol1"
> 
> 
> 
> -- 
> Info:
> To unsubscribe send a mail to listar@linuxtv.org with
> "unsubscribe vdr" as subject.
> 

----------------------------------------------
Das ist ein Service von austria.com


-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe vdr" as subject.