Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[vdr] Problems with acpi, linuxdvb and vdr
Hi,
my vdr-system (see below, signature) does work bad, if i'm using it
with acpi. Then the pc locks and freezes completely for minutes,
inclusive all network connections and the console. But acpi does
not share an interrupt with the linuxdvb-driver:
$cat /proc/interrupts
CPU0
0: 27083 XT-PIC timer
1: 2 XT-PIC keyboard
2: 0 XT-PIC cascade
4: 355 XT-PIC lirc_serial
5: 128445 XT-PIC saa7146(1)
8: 2 XT-PIC rtc
9: 0 XT-PIC acpi
11: 398 XT-PIC saa7146(0), eth0
14: 3008 XT-PIC ide0
15: 2 XT-PIC ide1
NMI: 0
LOC: 27051
ERR: 34
MIS: 0
If vdr is not running or acpi is off all is fine, even when the
dvb-modules are loaded.
I do need acpi, because the system can't be powered off without it.
Does anybody have an idea about the reasons?
Thanks for any help
--
Greetings
Peter
------------------------------------------------------
VDR-System:
Shuttle SS40G, gentoo-linux 1.4
Kernel 2.4.20, gcc 3.2.2, glibc 2.3.1
CFLAGS="-march=athlon-xp -O3 -pipe"
1 x Siemens-Fujitsu DVB-S
1 x WinTV-Nova-S
vdr-1.1.26, linux-dvb-1.0.0_pre2
------------------------------------------------------
current status: working well without acpi,
system locks and freezes for minutes
if used with acpi
------------------------------------------------------
current used vdr-plugins:
1. vcd: working perfect
2. mp3: plays MP3s, but fails with
audio-cd and cdfs
--
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe vdr" as subject.
Home |
Main Index |
Thread Index