Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[vdr] Re: Problems with acpi, linuxdvb and vdr
Peter Bossy wrote:
I had big problems with a Shuttle-Board.
The sharing of IRQs between DVB-card and network-card never worked.
Try to get either an own irq for each card or - this is in my opinion
still better - try to give both DVB-cards a shared IRQ.
regards
Wolfgang
> my vdr-system (see below, signature) does work bad, if i'm using it
> with acpi. Then the pc locks and freezes completely for minutes,
> inclusive all network connections and the console. But acpi does
> not share an interrupt with the linuxdvb-driver:
>
> $cat /proc/interrupts
> CPU0
> 0: 27083 XT-PIC timer
> 1: 2 XT-PIC keyboard
> 2: 0 XT-PIC cascade
> 4: 355 XT-PIC lirc_serial
> 5: 128445 XT-PIC saa7146(1)
> 8: 2 XT-PIC rtc
> 9: 0 XT-PIC acpi
> 11: 398 XT-PIC saa7146(0), eth0
> 14: 3008 XT-PIC ide0
> 15: 2 XT-PIC ide1
> NMI: 0
> LOC: 27051
> ERR: 34
> MIS: 0
> VDR-System:
> Shuttle SS40G, gentoo-linux 1.4
> Kernel 2.4.20, gcc 3.2.2, glibc 2.3.1
> CFLAGS="-march=athlon-xp -O3 -pipe"
> 1 x Siemens-Fujitsu DVB-S
> 1 x WinTV-Nova-S
--
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe vdr" as subject.
Home |
Main Index |
Thread Index