[vdr] Re: CRC Check with sections

[Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de>]

Nikolaus Isele wrote:
> 
> > > i got still problems with my Allcam 4.6. in the Log i got
> > "ERROR: CAM: Read
> > > failed: slot 0, tcid 1" Messages.
> >
> > There haven't been any changes lately that I would have
> > expected to fix this.
> >
> > > I don't have changed the hw_sections yet.
> > > How can i change this? Is there a need for Updating my
> > DVB-s 1.3 (primary)
> > > and DVB-s 2.1 (secondary) Firmware? If yes, how? Is there a
> > risk killing my
> > > cards if i update the firmware?
> >
> > The driver uploads the firmware every time you start it, so
> > there's no danger in that.
> > Just get VDR version 1.2.1 and the dirver I suggested and try it.
> 
> I installed the 1.2.1 and the drivers that you recommended, but nothing
> changes relating my allcam problem.
> If i try to record with this vdr + driver combination, all recordings are
> completely damaged.
> 
> The only way to get the recordings and cam working is to copy the files
> described in "../DVB/driver/av7110/README-firmware" and recompile the driver
> (thanx to Norbert Schmidt).
> But this is not the best solution.

As I said, the CAM problem still exists and at the moment the only way
to use CAMs that don't work with the LL firmware is to use the -icam
firmware.

What about FTA channels? Can you record these without errors?

Klaus
-- 
_______________________________________________________________

Klaus Schmidinger                       Phone: +49-8635-6989-10
CadSoft Computer GmbH                   Fax:   +49-8635-6989-40
Hofmark 2                               Email:   kls@cadsoft.de
D-84568 Pleiskirchen, Germany           URL:     www.cadsoft.de
_______________________________________________________________


-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.