[vdr] Aston 1.05 ... not quite there

[Miguel Sanchez <misan@ieee.org>]

Hi there,

Trying to get working an Aston CAM 1.05 with Nexus and 1.6 3.5" CI

While ftp://ftp.cadsoft.de/vdr/Developer/cams.txt states a complete 
failure, mine is only partial as some steps do work (does it really 
matter? maybe not ...).

In my setup channel 1 is encrypted and 2 is free to air.

I see no other than a black screen for channel 1, while 2 works just fine.



I do not know if any of this info can be useful.

This is the dialog showing on my terminal:

--> 00 01 A0 01 01
<-- 00 01 80 02 01 00
  .  .  .  .  .  .
--> 00 01 A0 01 01
<-- 00 01 80 02 01 00
  .  .  .  .  .  .
--> 00 01 A0 01 01
<-- 00 01 80 02 01 00
  .  .  .  .  .  .
--> 00 01 A0 01 01
<-- 00 01 80 02 01 00
  .  .  .  .  .  .
--> 00 01 A0 01 01
<-- 00 01 80 02 01 00
  .  .  .  .  .  .
--> 00 01 A0 01 01
<-- 00 01 80 02 01 00
  .  .  .  .  .  .
--> 00 01 A0 01 01
<-- 00 01 80 02 01 00
  .  .  .  .  .  .
--> 00 01 A0 01 01
<-- 00 01 80 02 01 00
  .  .  .  .  .  .
--> 00 01 A0 01 01
<-- 00 01 80 02 01 00

As soon as I remove the smartcard VDR shows a message asking for it.

Logfile and result matrix are show below.

I'm using linux-dvb.2003-06-08 recomended driver (kernel 2.4.20 from 
suse 8.2).

Any help is appreciated.

Miguel Sanchez


Aug  2 17:31:15 msanchez vdr[6418]: VDR version 1.2.1 started
Aug  2 17:31:15 msanchez vdr[6418]: loading /video/setup.conf
Aug  2 17:31:15 msanchez vdr[6418]: ERROR: unknown config parameter: 
Style = 0
Aug  2 17:31:15 msanchez vdr[6418]: loading /video/channels.conf
Aug  2 17:31:15 msanchez vdr[6418]: loading /video/timers.conf
Aug  2 17:31:15 msanchez vdr[6418]: loading /video/svdrphosts.conf
Aug  2 17:31:15 msanchez vdr[6418]: loading /video/ca.conf
Aug  2 17:31:15 msanchez vdr[6418]: loading /video/remote.conf
Aug  2 17:31:15 msanchez vdr[6418]: probing /dev/dvb/adapter0/frontend0
Aug  2 17:31:15 msanchez vdr[6421]: EIT processing thread started 
(pid=6421) - master
Aug  2 17:31:15 msanchez vdr[6422]: tuner thread started on device 1 
(pid=6422)
Aug  2 17:31:15 msanchez vdr[6418]: probing /dev/dvb/adapter1/frontend0
Aug  2 17:31:15 msanchez vdr[6418]: found 1 video device
Aug  2 17:31:15 msanchez vdr[6418]: setting primary device to 1
Aug  2 17:31:15 msanchez vdr[6418]: SVDRP listening on port 2001
Aug  2 17:31:15 msanchez vdr[6423]: KBD remote control thread started 
(pid=6423)
Aug  2 17:31:15 msanchez vdr[6418]: remote control KBD - keys known
Aug  2 17:31:15 msanchez vdr[6418]: switching to channel 1
Aug  2 17:31:15 msanchez vdr[6418]: reading EPG data from /video/epg.data
Aug  2 17:31:16 msanchez vdr[6421]: CAM: 88C0 11038 30400 0100     64 
05DC - 09 11 01 00 E5 DC 00 64 FF 00 00 00 00 08 01 00 06 1B 02
Aug  2 17:31:17 msanchez vdr[6421]: CAM: 88C0 11038 30403 0100     64 
05E2 - 09 11 01 00 E5 E2 00 64 FF 01 00 00 00 00 01 00 86 1B 02
Aug  2 17:31:17 msanchez vdr[6421]: CAM: 88C0 11038 30404 0100     64 
05E4 - 09 11 01 00 E5 E4 00 64 FF 00 00 00 04 00 00 80 06 1B 02
Aug  2 17:31:17 msanchez vdr[6421]: CAM: 88C0 11038 30405 0100     64 
05E5 - 09 11 01 00 E5 E5 00 64 FF 00 00 00 00 01 00 80 06 1B 02
Aug  2 17:31:18 msanchez vdr[6421]: CAM: 88C0 11038 30406 0100     64 
05E6 - 09 11 01 00 E5 E6 00 64 FF 00 00 00 00 00 20 80 06 1B 02
Aug  2 17:31:18 msanchez vdr[6421]: CAM: 88C0 11038 30407 0100     64 
05E7 - 09 11 01 00 E5 E7 00 64 FF 00 00 00 20 00 00 80 06 1B 02
Aug  2 17:31:19 msanchez vdr[6421]: CAM: 88C0 11038 30410 0100     64 
05EB - 09 11 01 00 E5 EB 00 64 FF 00 00 00 00 00 01 00 06 1B 02
Aug  2 17:31:20 msanchez vdr[6422]: CAM: ASTON, 01, 0100, 0100
Aug  2 17:31:20 msanchez vdr[6421]: CAM: 88C0 11038 30411 0100     64 
05ED - 09 11 01 00 E5 ED 00 64 FF 00 00 00 00 00 04 00 06 1B 02
Aug  2 17:31:30 msanchez vdr[6418]: switching to channel 2
Aug  2 17:31:35 msanchez vdr[6418]: switching to channel 1

                             1      2      3      4      5      6      
7      8      9       Old   Mult Notes
*** Test results 1.2.1:
Aston 1.05                     ok     ok     ok     ok     ok     ok     
fail   fail   fail    ???   CA descriptors do show up at the beginning
CI rev 1.6 (3.5")                    




--
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.