[vdr] Re: timer bug: Usage of channel ID inconsitend

[Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de>]

Alexander Wetzel wrote:
> 
> 1.) Created a copy of ARD with NID=1
> 
> ARD2:11836:h:S19.2E:27500:101:102:104:0:28106:1:0.0

I assume the '.' between the last to '0' is just a typo...

> 2) Started VDR from command line (without pugins)
> Sep  7 14:55:00 vdr vdr[1878]: VDR version 1.2.2 started
> Sep  7 14:55:00 vdr vdr[1878]: loading /video/setup.conf
> Sep  7 14:55:00 vdr vdr[1878]: loading /video/sources.conf
> Sep  7 14:55:00 vdr vdr[1878]: loading /video/diseqc.conf
> Sep  7 14:55:00 vdr vdr[1878]: loading /video/channels.conf
> Sep  7 14:55:00 vdr vdr[1878]: loading /video/timers.conf
> Sep  7 14:55:00 vdr vdr[1878]: loading /video/svdrphosts.conf
> Sep  7 14:55:00 vdr vdr[1878]: loading /video/ca.conf
> Sep  7 14:55:00 vdr vdr[1878]: loading /video/remote.conf
> Sep  7 14:55:00 vdr vdr[1878]: loading /video/keymacros.conf
> Sep  7 14:55:00 vdr vdr[1878]: found 2 video devices
> Sep  7 14:55:00 vdr vdr[1878]: setting primary device to 1
> Sep  7 14:55:00 vdr vdr[1878]: SVDRP listening on port 2001
> Sep  7 14:55:00 vdr vdr[1878]: switching to channel 1
> 
> 2.) Created a timer with the OSD. New entry in timers.conf:
> Sep  7 14:56:46 vdr vdr[1878]: timer 10 added (active)
> 
> Entry in timers.conf: 1:S19.2E-1-0-28106:8:1456:1756:50:99:a:
> 
> 3.) Closed all OSD windows and opend again the timer window. Timer is listed
> 
> 4.) restarted vdr
> Sep  7 14:59:19 vdr vdr[1878]: caught signal 2
> Sep  7 14:59:19 vdr vdr[1878]: saved setup to /video/setup.conf
> Sep  7 14:59:20 vdr vdr[1878]: exiting
> Sep  7 14:59:46 vdr vdr[1895]: VDR version 1.2.2 started
> Sep  7 14:59:46 vdr vdr[1895]: loading /video/setup.conf
> Sep  7 14:59:46 vdr vdr[1895]: loading /video/sources.conf
> Sep  7 14:59:46 vdr vdr[1895]: loading /video/diseqc.conf
> Sep  7 14:59:46 vdr vdr[1895]: loading /video/channels.conf
> Sep  7 14:59:46 vdr vdr[1895]: loading /video/timers.conf
> Sep  7 14:59:47 vdr vdr[1895]: loading /video/svdrphosts.conf
> Sep  7 14:59:47 vdr vdr[1895]: loading /video/ca.conf
> Sep  7 14:59:47 vdr vdr[1895]: loading /video/remote.conf
> Sep  7 14:59:47 vdr vdr[1895]: loading /video/keymacros.conf
> Sep  7 14:59:47 vdr vdr[1895]: found 2 video devices
> Sep  7 14:59:47 vdr vdr[1895]: setting primary device to 1
> Sep  7 14:59:47 vdr vdr[1895]: SVDRP listening on port 2001
> Sep  7 14:59:47 vdr vdr[1895]: switching to channel 1

At this point newer developer versions log this:

Sep  7 16:14:14 video vdr[863]: loading /video/timers.conf
Sep  7 16:14:14 video vdr[863]: ERROR: channel S19.2E-1-0-28106 not defined
Sep  7 16:14:14 video vdr[863]: ERROR: error in /video/timers.conf, line 22 

> 5.) Reopend OSD/timers. timer gone

Newer developer versions don't get that far, due to the above error.

The problem here is that you have used an invalid combination of NID and
TID. If NID is not 0, TID must not be 0, too, because that's an invalid TID.

Use a TID other than 0 and it works.

Klaus


-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.