[vdr] Re: vdr-1.2.26 + DXR3 Plugin + DXR3 driver 0.14.0: microcode upload failure on SuSE9.0

["Christian Cier-Zniewski" <c.cier@gmx.de>]

Christian Gmeiner wrote:
> Try to use the -f paramter for em8300setup, like this:
> em8300setup -f /where/the/microcode/is/em8300.uc
>
> what does this comment return?

videoclient:/vdr/em8300/em8300setup # ./em8300setup -f
/usr/share/misc/em8300.uc
Using microcode file /usr/share/misc/em8300.uc
Microcode upload to /dev/em8300-0 failed:
videoclient:/vdr/em8300/em8300setup #
----------------------------------------------------------------------------
--------------

videoclient:/vdr/em8300/em8300setup # ./em8300setup -p
Setting tvmode = 0
Current settings are:
Video   Aspect  Audio   Spu
PAL     4:3     ANALOG  OFF
videoclient:/vdr/em8300/em8300setup #

----------------------------------------------------------------------------
---------------

videoclient:/vdr/em8300/em8300setup # ./em8300setup
Microcode upload to /dev/em8300-0 failed:
videoclient:/vdr/em8300/em8300setup #
----------------------------------------------------------------------------
----------------

videoclient:/vdr/em8300/em8300setup # ./em8300setup -p -f
/usr/share/misc/em8300.uc
Using microcode file /usr/share/misc/em8300.uc
Microcode upload to /dev/em8300-0 failed:
videoclient:/vdr/em8300/em8300setup #
----------------------------------------------------------------------------
----------------

Strange, isn't it?
Especially the last one.... the em8300.uc is definitly the correct file from
the 0.14.0 driver.

If I remove the em8300.o module and insert it again, I get:

videoclient:/vdr/em8300/em8300setup # ./em8300setup -p
Setting tvmode = 0
Unable to set videomode : em8300 Driver returned ENOTTY from ioctl - perhaps
you need to upload the microcode 1st?
Current settings are:
Cannot read tvmode : em8300 Driver returned ENOTTY from ioctl - perhaps you
need to upload the microcode 1st?
Cannot read aspect : em8300 Driver returned ENOTTY from ioctl - perhaps you
need to upload the microcode 1st?
Cannot read audio : em8300 Driver returned ENOTTY from ioctl - perhaps you
need to upload the microcode 1st?
Cannot read spu : em8300 Driver returned ENOTTY from ioctl - perhaps you
need to upload the microcode 1st?
Video   Aspect  Audio   Spu
???     ???     ???     ???
videoclient:/vdr/em8300/em8300setup #

The syslog says whenever it fails:
 videoclient kernel: em8300: DICOM Update failed




-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.