[vdr] Re: which driver for which card?

[Richard Müller <r.mueller@oeko-sorpe.de>]

> > I use the dvb-driver 1.0.1 in my system (c't-vdr from the 08/2004-CD)
> > together with a Hauppauge rev 1.6 (with hardware mpeg-decoding). Now I
> > added a WinTV Nova rev 1.0 budget card as second card, and (even after
> > new installation with both cards) vdr showed a "time out" while
> > recognizig this card. Driver 1.1.1 fails too. When removing the new card,
> > everything works again. Any hints?
>
> Just to be sure: The second card is connected to your sat dish or
> switch? 
yes. I have a dual LNB, both connectors show a signal.
It does lock on a channel (check it by calling femon with -a1;
> use -a0 to see what's happening on the first card)? If that's not the
> case check the connection with a standalone receiver.
There_is_ a connection.
With this card in the slot I can not switch to a console, so I can't type any 
commands.
>
> Anyway: Can you provide some more details on "vdr showing a time out",
The display shows numerous lines of:
wait_for_debi_done: timed out while waiting for transfer completion
I have to remve that card, start again, then I have access to the system.
The files I found with find / -name  *.log -print had no information 
significant for this problem. The files in /var/log are so numerous that it 
makes no sense to pick just some of them by chance. Which file is the most 
interesting one?
> may be some excerpt from the log files?
see above
> Peter

Thanks - Richard

-- 
--
Richard Müller - Am Spring 9 - D-58802 Balve-Eisborn
r.mueller@oeko-sorpe.de      -     www.oeko-sorpe.de