[vdr] Re: Test version 1.0rc3 of firmware 0x261d for AC3 replay

[Rainer Zocholl <UseNet-Posting-Nospam-74308-@zocki.toppoint.de>]

werner@suse.de(Dr. Werner Fink)  02.12.04 19:24


>      http://www.suse.de/~werner/test_av-1.0rc3.tar.bz2

>the hopefully the last release candidate for the final
>firmware 0x261d.

>New since test version 0.9b for firmware 0x261d:

>      * Better handling of pid setting, from now on no
>        single PCR pid will be lost even if not identical
>        with the video or audio pid.

>      * Reduced picture distribution in the transfer mode
>        of VDR due picture underrun caused by the  AV offset
>        of several channels.  This can lead to a longer
>        duration for the AV synchronization (please give
>        me some feedback).

>      * Feedback for the driver of the status of the command
>        queue, if and only if the driver uses this.

>      * Really flush the TS queue if requested by the driver.

>      * Better scheduling between the OSD and the Audio data
>        transfer.  Should reduce audio drop outs even for
>        the AC3overDVB patch of the VDR.

>      * Support of the AC3 free flow payload format of the ORF.


The firmware 26d works here.
But ihave the feeling that every recording start/stop(?) causes
a black screen.


After i applied the patch vdr-1.3.17
patch -p0 < ../test_av/vdr-1.3.17-ac3.dif
ARD comes up with sound
Zapping to ZDF
Not sound just noise like "trtrrtrtrtrtrttrtrr"
Zaping back:
No sound any more.
patch -p0 -R < ../test_av/vdr-1.3.17-ac3.dif
left over
"int cPlayer::PlayPES(const uchar *, int, unsigned char, bool)"



syslog says:
0:59 vdr[25712]: remote control LIRC - keys known
0:59 vdr[25712]: switching to channel 1
0:59 vdr[25727]: LIRC remote control thread started (pid=25727, tid=147466)
1:00 vdr[25712]: setting watchdog timer to 60 seconds
1:01 vdr[25712]: max. latency time 1 seconds
1:05 vdr[25712]: switching to channel 2
1:05 vdr[25712]: INFO: cReceiver called with 0 -1 110 120 121 125
1:06 vdr[25736]: transfer thread started (pid=25736,tid=163851)
1:06 vdr[25737]: receiver on device 1 LNB: 1, numDevices 0 thread started (pid=25737, tid=180236)
1:06 vdr[25738]: TS buffer on device 1 thread started (pid=25738, tid=196621)

1:09 vdr[25712]: switching to channel 1
1:09 vdr[25736]: transfer thread ended (pid=25736, tid=163851)
1:10 vdr[25738]: TS buffer on device 1 thread ended (pid=25738, tid=196621)
1:10 vdr[25737]: buffer stats: 78396 (3%) used
1:10 vdr[25737]: receiver on device 1 LNB: 1, numDevices 0 thread ended (pid=25737, tid=180236)
1:10 vdr[25712]: cTS2PES got 0 TS errors, 1 TS continuity errors
1:10 vdr[25712]: cTS2PES got 0 TS errors, 1 TS continuity errors
1:10 vdr[25712]: buffer stats: 348176 (16%) used
1:19 vdr[25712]: max. latency time 2 seconds

8:12 vdr[25712]: caught signal 15
8:14 lircd 0.7.0[25695]: removed client
8:23 logger[27572]: starting /root/video/VDR/runvdr
8:23 lircd 0.7.0[25695]: caught signal
8:24 kernel: lirc_dev: IR Remote Control driver registered, at major 61
8:25 kernel: lirc_serial: auto-detected active low receiver
8:25 kernel: lirc_dev: lirc_register_plugin:sample_rate: 0
8:25 lircd 0.7.0[27582]: lircd(serial) ready
8:25 vdr[27597]: VDR version 1.3.17 started
8:25 vdr[27597]: loading /video/setup.conf

Rainer---<=====>                         Vertraulich
             //
           //                              
         <=====>--------------ocholl, Kiel, Germany ------------