Hello.
I have dazzle tv mobile wich is detected by system as Pinnacle PCTV USB2
I installed latest dvb drivers, but via mplayer and kdetv picture from tv
input with choosing norm(secam) picture is being b&w. However, Composite1
input in PAL works fine.
I have OpenSUSE 10.3 with 2.6.22-13 0.3 kernel
My tv file:
alias char-major-81 videodev
options em28xx card=3 i2c_scan=1 tuner=38
options i2c-algo-bit bit_test=1
alias char-major-81-0 off
alias char-major-81-1 em28xx
alias char-major-81-2 off
alias char-major-81-3 off
My dmesg
skyline1:/etc/sysconfig # dmesg | grep em28xx
em28xx v4l2 driver version 0.1.0 loaded
em28xx new video device (2304:0208): interface 0, class 255
em28xx Has usb audio class
em28xx #0: Alternate settings: 8
em28xx #0: Alternate setting 0, max size= 0
em28xx #0: Alternate setting 1, max size= 1024
em28xx #0: Alternate setting 2, max size= 1448
em28xx #0: Alternate setting 3, max size= 2048
em28xx #0: Alternate setting 4, max size= 2304
em28xx #0: Alternate setting 5, max size= 2580
em28xx #0: Alternate setting 6, max size= 2892
em28xx #0: Alternate setting 7, max size= 3072
em28xx #0: em28xx chip ID = 18
em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 08 02 10 00 1e 03 98 1e 6a 2e
em28xx #0: i2c eeprom 10: 00 00 06 57 6e 00 00 00 8e 00 00 00 07 00 00 00
em28xx #0: i2c eeprom 20: 16 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 01 00 00 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 2e 03 50 00 69 00
em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00
em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 20 00 47 00
em28xx #0: i2c eeprom 90: 6d 00 62 00 48 00 00 00 1e 03 50 00 43 00 54 00
em28xx #0: i2c eeprom a0: 56 00 20 00 55 00 53 00 42 00 32 00 20 00 50 00
em28xx #0: i2c eeprom b0: 41 00 4c 00 00 00 06 03 31 00 00 00 00 00 00 00
em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 0e 5d 62 35 03 ad 8f 26
em28xx #0: found i2c device @ 0x4a [saa7113h]
em28xx #0: found i2c device @ 0x86 [tda9887]
em28xx #0: found i2c device @ 0x8e [remote IR sensor]
em28xx #0: found i2c device @ 0xa0 [eeprom]
em28xx #0: found i2c device @ 0xc6 [tuner (analog)]
saa7115' 1-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0)
tuner' 1-0043: chip found @ 0x86 (em28xx #0)
tuner' 1-0063: chip found @ 0xc6 (em28xx #0)
em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
em28xx #0: Found Pinnacle PCTV USB 2
em28xx audio device (2304:0208): interface 1, class 1
em28xx audio device (2304:0208): interface 2, class 1
usbcore: registered new interface driver em28xx
options tuner secam=d makes nothing
