vdr July 2005

vdr@linuxtv.org

116 participants
152 discussions

Can't compile games-0.6.1 with gcc 4.01
by Guy Roussin 20 Jul '05

20 Jul '05

Hi, I upgrade my debian/sid and now i can't compile some plugins (due to gcc 4.0.1, i suppose ...) make[2]: Entering directory `/tmp/vdr-1.3.27/PLUGINS/src/games-0.6.1' .plugin.cpp: In member function 'virtual eOSState GameStart::ProcessKey(eKeys)':plugin.cpp:111: error: invalid lvalue in assignment make[2]: *** [plugin.o] Erreur 1 Extract of plugin.cpp (...) 109:eOSState 110:GameStart::ProcessKey(eKeys k) { 111: if (r) (int)k &= 0x7fff; 112: if (launcher_key((int)k)) return (osEnd); 113: return (osContinue); 114:} (...) Thanks, Guy ___________________________________ NOCC, http://www.teledetection.fr

4 3

1.3.27 stops
by tony 20 Jul '05

20 Jul '05

It stopped again yesterday evening. And of course is sitting there waiting for a password instead of recording what I had programmed yesterday night... Anyone else seeing this? Tony

2 1

EPG scan stops VDR
by tony 20 Jul '05

20 Jul '05

Jul 20 13:27:06 hush vdr[5810]: info: Starting EPG scan Jul 20 13:28:37 hush vdr[5810]: PANIC: watchdog timer expired - exiting! I have seen this before I have to turn off EPG in vdradmin or vdr from memory? Tony

1 0

VDR cannot tune
by Matthias Fechner 20 Jul '05

20 Jul '05

Hi, i changed some days ago to kernel 2.6.13-rc1 with cvs-head driver and the newest firmware. Now i switched on my tv and the screen was black. If i try to change the channel, i only see a black screen (menu is working fine and i can replay recordings). If i look in the logfile i found: --- cut --- Jul 16 10:16:20 [vdr] buffer stats: 0 (0%) used Jul 16 10:16:20 [vdr] receiver on device 1 thread started (pid=4202, tid=10600456) Jul 16 10:16:20 [vdr] TS buffer on device 1 thread started (pid=4203, tid=10616841) Jul 16 10:16:20 [vdr] Text2Skin: channelInfo display update thread started (pid=4204, tid=10633226) Jul 16 10:16:25 [vdr] Text2Skin: channelInfo display update thread ended (pid=4204, tid=10633226) Jul 16 10:16:34 [vdr] Text2Skin: channelInfo display update thread started (pid=4262, tid=10649610) Jul 16 10:16:34 [vdr] Text2Skin: channelInfo display update thread ended (pid=4262, tid=10649610) Jul 16 10:16:42 [vdr] Text2Skin: menu display update thread started (pid=4282, tid=10665994) Jul 16 10:16:42 [vdr] max. latency time 15 seconds Jul 16 10:16:42 [vdr] Text2Skin: menu display update thread ended (pid=4282, tid=10665994) Jul 16 10:16:43 [vdr] ERROR: can't set filter (pid=18, tid=4E, mask=FE): Operation not permitted Jul 16 10:16:43 [vdr] ERROR: can't set filter (pid=18, tid=50, mask=F0): Operation not permitted Jul 16 10:16:43 [vdr] ERROR: can't set filter (pid=18, tid=60, mask=F0): Operation not permitted Jul 16 10:16:43 [vdr] ERROR: can't set filter (pid=20, tid=70, mask=FF): Operation not permitted Jul 16 10:16:43 [vdr] ERROR: can't set filter (pid=0, tid=00, mask=FF): Operation not permitted Jul 16 10:16:43 [vdr] ERROR: can't set filter (pid=17, tid=42, mask=FF): Operation not permitted Jul 16 10:16:43 [vdr] ERROR: can't set filter (pid=16, tid=40, mask=FF): Operation not permitted Jul 16 10:17:14 [vdr] Text2Skin: menu display update thread started (pid=4447, tid=10682378) Jul 16 10:17:16 [vdr] Text2Skin: menu display update thread ended (pid=4447, tid=10682378) Jul 16 10:17:17 [vdr] switching to channel 9 Jul 16 10:17:17 [vdr] TS buffer on device 1 thread ended (pid=4203, tid=10616841) Jul 16 10:17:17 [vdr] buffer stats: 0 (0%) used Jul 16 10:17:17 [vdr] receiver on device 1 thread ended (pid=4202, tid=10600456) Jul 16 10:17:17 [vdr] buffer stats: 0 (0%) used Jul 16 10:17:17 [vdr] creating directory /vtx/S19.2E-133-33-898 Jul 16 10:17:22 [vdr] ERROR: device 1 has no lock, can't attach receiver! Jul 16 10:17:22 [vdr] Text2Skin: channelInfo display update thread started (pid=4472, tid=10698759) Jul 16 10:17:27 [vdr] Text2Skin: channelInfo display update thread ended (pid=4472, tid=10698759) --- cut --- I have in my runvdr script the line: export LD_ASSUME_KERNEL=2.4.1 What is here the problem? Has anyone an idea, how to solve this problem? -- Bye Matthias

1 1

spanish dvb-t
by Leo Márquez 19 Jul '05

19 Jul '05

Hi!, I'm trying to view spanish tdt channels with a cinergy 1200 dvb-t card and vdr as software. The tuner data to see these channels is: Net id: 12662 OFDM Mode: 8k Modulation: QAM64 Codification relationship: 2/3 ???: 1/4 Bandwith: 8Mhz Frequency: 538000 Khz My syslog error is an vdr message: ERROR: device 1 has no lock, can't attach receiver! I have readed that can be a problem with the dvd driver but I'm not sure. I'm using kernel 2.6.11.10 with the dvb driver included. Any suggestions? Thanks!

2 1

Showing aspect ratio or providing automatic widescreen switching signals
by Mark Watson 19 Jul '05

19 Jul '05

I just got a widescreen TV and put VDR in 16:9 mode. However there is still a lot of content still in 4:3 mode and it sometimes takes me a while to spot the short/fat people and switch the TV! It would help to see the aspect on the overlay when switching channels. Are there any plugins or patches that show the aspect on the overlay? Even better, are there any plugins that deal with providing automatic 16:9/4:3 switching signals for Scart leads? Of course a hardware mod would be required... Thanks, Mark ---------- Apologies for people on non-threaded mail programs who saw this message already. I incorrectly posted response to the "MP3 plugin and MP2 streaming" instead of creating a new thread (Hadn't realised how threading on mailing lists worked!). ----------

2 2

lirc advancing
by tony 19 Jul '05

19 Jul '05

I have lircd responding to button presses once again!!! Yay! OK so I get into learning mode and press the "Up" key and then the "Down" key which sends me back to the Up key ad nauseum. I think I am in a loop =;-D Any ideas? Tony

1 0

Re: Fw: [vdr] Adding keys to VDR
by Reinhard Nissl 19 Jul '05

19 Jul '05

Hi, Simon Baxter wrote: > Hi Richard - can you help me with a mod to your patch?? ^^^^^^^ Reinhard! > I've been trying to add 2 User keys as a modification to Richard's patch > below. > > Instead of using 1 & 3 to skip 10 seconds, want to use User1 and User2 > +#define kEditJumpBack kUser1 > +#define kEditJumpForward kUser2 > > why doesn't this work?? Have a look into vdr.c (~ line 707) for this line: case kUser1 ... kUser9: cRemote::PutMacro(key); key = kNone; break; So the user keys just get translated into the defined macros and are afterwards deleted (= set to kNone). Bye. -- Dipl.-Inform. (FH) Reinhard Nissl mailto:rnissl@gmx.de

3 5

VDR do not switch from transpoder to transpoder
by andreyv 19 Jul '05

19 Jul '05

Hi, I am looking for a help. I found that VDR by some unknown to me reason refuses to change frequency when I go to a channel on other transpoder. Can somebody give an idea what could be wrong? Until I am on same transpoder I am able watch channels but only I switch to other transpoder I get black screen. I have to use szap to switch to channel on other transpoder. Linux: Mandrake 10 Kernel: 2.6.11-6mdk Driver: configured in kernel VDR: 1.3.27 (compiled from source files) Plugins: remote rotor control channelscan (compiled from source files) Satellites: 97.0W 123.0W (fta channels) Country: Canada Thanks, Andy

1 0

vdr-burn (0.6) [BUG]
by mike lewis 18 Jul '05

18 Jul '05

Hi, I'm having some issues with the latest vdr-burn. (0.6g pre3?) Not sure where to post the error to. It seems to create the menu perfectly, but when all episodes have the same name (like 24, 24, 24, 24, 4 episodes of 24), I get a menu that always points to the same copy of 24. If I let itplay through from the first episode, It will play 4 times, and from the size of the image I imagine that is actually has 4 copies of the one episode. Can anyone offer some direction on where I should report this bug to? Mick

2 1

← Newer
1
...
5
6
7
8
9
10
11
...
16
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr July 2005