vdr March 2006

vdr@linuxtv.org

131 participants
151 discussions

Problems with PVR350 and DVB-C
by Dirk Vornheder 16 Mar '06

16 Mar '06

Hi ! My standalone vdr-PC has only a Hauppauge PVR350 inside. The pc has no keyboard, no mouse. The PVR350 is directly connected to my Plasma-TV via svhs-cable. I use vdr 1.3.44 with the plugins pvrinput and pvr350. Everything works fine. Yesterday i buy and insert a Hauppauge DVB-C with CI modul to use my Digital Home Connection from Kabel Deutschland. Recording works but i can't see anything on my tv screen. I don't change the cable connection between pc (PVR350/DVB-C) and tv screen. Dirk ___________________________________________________________ Telefonate ohne weitere Kosten vom PC zum PC: http://messenger.yahoo.de

1 0

shutdown problem
by Oliver Joa 16 Mar '06

16 Mar '06

hi, i use vdr 1.3.41 without patches and plugins. sometimes i have the problem, that vdr wants to shutdown and asks for keypress. when i press a key, the message dissapiers, but after some minutes vdr ask again, and i press again and so on. after some time it shuts down. here is the logfile: Mar 13 21:14:28 video1 vdr: [2577] channel 7 (Super RTL) event 21:15 'Stars auf vier Pfoten - Tierische Talente und ihre Trainer' status 4 Mar 13 21:14:28 video1 vdr: [2577] channel 5 (RTL Television) event 21:15 'Hinter Gittern - Der Frauenknast' status 4 Mar 13 21:14:45 video1 vdr: [2531] confirm: Taste dr<FC>cken, um Shutdown abzubrechen Mar 13 21:14:45 video1 vdr: [2531] warning: Taste dr<FC>cken, um Shutdown abzubrechen Mar 13 21:16:30 video1 vdr: [2531] not confirmed Mar 13 21:21:31 video1 vdr: [2531] confirm: Taste dr<FC>cken, um Shutdown abzubrechen Mar 13 21:21:31 video1 vdr: [2531] warning: Taste dr<FC>cken, um Shutdown abzubrechen Mar 13 21:21:36 video1 vdr: [2531] not confirmed Mar 13 21:26:37 video1 vdr: [2531] confirm: Taste dr<FC>cken, um Shutdown abzubrechen Mar 13 21:26:37 video1 vdr: [2531] warning: Taste dr<FC>cken, um Shutdown abzubrechen Mar 13 21:28:11 video1 vdr: [2531] not confirmed Mar 13 21:33:12 video1 vdr: [2531] confirm: Taste dr<FC>cken, um Shutdown abzubrechen Mar 13 21:33:12 video1 vdr: [2531] warning: Taste dr<FC>cken, um Shutdown abzubrechen Mar 13 21:33:18 video1 vdr: [2531] not confirmed Mar 13 21:38:19 video1 vdr: [2531] confirm: Taste dr<FC>cken, um Shutdown abzubrechen Mar 13 21:38:19 video1 vdr: [2531] warning: Taste dr<FC>cken, um Shutdown abzubrechen Mar 13 21:39:36 video1 vdr: [2531] not confirmed as you can see, at 21:14 i switched the channel. normally vdr should not try to shutdown some seconds later... thanks olli

2 1

lirc w/ vdr working for some time but then ignoring keys ?
by Soeren Sonnenburg 16 Mar '06

16 Mar '06

Hi all, I am experiencing difficulties with the lirc-vdr interface. It is working flawlessly for a couple of minutes (hours) but then suddenly does not anymore do anything, or ignores 99.9% of the keypresses... except for the first one (e.g. pressing menu once makes it pop up but then pressing menu again does not hide it... also no other button works afterwards). I checked wether this is a problem with lirc or a problem of vdr and well lirc is still up and running and other lirc based apps still work. This is with vdr 1.3.34 but judging from the source of 1.3.44 this will happen there too (the only change I can see is that cases where lircd is restarted are trapped). Any ideas ? Soeren -- Sometimes, there's a moment as you're waking, when you become aware of the real world around you, but you're still dreaming.

1 0

RE: [vdr] Any USA users out there?
by Vladimir Shved 16 Mar '06

16 Mar '06

How do you explain the fact that there is a lot of hype from many North American users, and sellers, of DVB-S standalone boxes that they can receive more than a thousand of channels? I think you're missing out something there... --Vlad > -----Original Message----- > From: vdr-bounces(a)linuxtv.org [mailto:vdr-bounces@linuxtv.org] On Behalf > Of Simon Baxter > Sent: Tuesday, March 14, 2006 10:01 AM > To: VDR Mailing List > Subject: Re: [vdr] Any USA users out there? > > This is what I heard. No DVB - 8-VSB on terrestrial and DAVIC (not > DOCSIS) > on cable. > > Looks like the only DVB I'm going to be able to do is DVB-S. I can't even > do DirecTV which uses DSS and (US) NDS. > > I think it's going to be very hard to get much going with DVB and VDR in > the > USA!! > > > > > > > > hi, > > > > Chad Flynt writes: > > > Only have experience with DVB-S, but the T cards should work as well. > > > > Really? I had the impression that the U.S. would use ATSC DTV. > > > > Or it this (again) something that the broadcaster can freely choose? > > > > yours, > > (just curious) Jouni > > > > _______________________________________________ > > vdr mailing list > > vdr(a)linuxtv.org > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > > > > > _______________________________________________ > vdr mailing list > vdr(a)linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

3 3

vdr 1.3.44: more format string checking
by Darren Salt 15 Mar '06

15 Mar '06

I've done a build of vdr 1.3.44 with -Wformat=2. This was noisier than it might be due to some tr() calls; however, in <libintl.h>, I've spotted something of use: __attribute_format_arg__ (index) With this added to the prototype for I18nTranslate, a lot of "non-constant format string" warnings are eliminated. I've also found several possible problems, mostly missing format strings. I don't /think/ that any of the missing-format-string ones are exploitable (at least one definitely isn't), but it's better to have them fixed anyway... Patch attached. This kills all of the format string warnings which I could find. -- | Darren Salt | linux or ds at | nr. Ashington, | Toon | RISC OS, Linux | youmustbejoking,demon,co,uk | Northumberland | Army | <URL:http://www.youmustbejoking.demon.co.uk/> (PGP 2.6, GPG keys) Don't put too fine a point to your wit for fear it should get blunted.

2 2

Announce: zaphistory-0.9.2
by Peter Juszack 15 Mar '06

15 Mar '06

Hallo there is a new version of the zaphistory plugin available: http://vaasa.wi-bw.tfh-wildau.de/~pjuszack/digicam/download/vdr-zaphistory-… - bugfix for channels without EPG data - added Estonian translation (thanks to Arthur Konovalov) Have fun Peter

1 0

[ANNOUNCE] bitstreamout plugin 0.85 (AC3 loop through sound card)
by Dr. Werner Fink 14 Mar '06

14 Mar '06

Hi, just uploaded bitstreamout plugin version 0.85. With the following changes: --------------------------------------------------------------- Tue Mar 14 16:59:38 CET 2006 - Various cleanups and bug fixes - Try to get Mpeg Audio more lip sync --------------------------------------------------------------- for download information have a look on my signature. Werner -- AC3 loop through sound card http://bitstreamout.sourceforge.net/ Howto http://www.vdr-portal.de/board/thread.php?threadid=1958 ------------------------------------------------------------------ "Having a smoking section in a restaurant is like having a peeing section in a swimming pool." -- Edward Burr

2 2

Any USA users out there?
by Simon Baxter 14 Mar '06

14 Mar '06

Hi. I'm in Bellevue Washington - are there any USA users of VDR out there? I have just moved here, after using VDR for the past 2 years in the UK. Simon

3 5

Vdr-xine and XvMC?
by Seppo Ingalsuo 14 Mar '06

14 Mar '06

Has someone had success with XvMC? Video decoding, even 1080i HDTV promo channels from Astra, works with very low CPU load but I get no VDR OSD and I think aspect ratio for 16:9 video is wrong. XvMC driver is from Nvidia 7676, vdr, vdr-xine, etc. are latest versions. X desktop size is 1368x768. The same systems runs nicely with Xv output method but there is a little bit too little power to run a good deinterlacer such GreedyH without cheap mode for HDTV. It would be also nice to have automatic separate deinterlacer configurations for SDTV and HDTV but I belive that goes out of scope of vdr-xine plugin, right? BR, Seppo

4 4

xine changing OSD modes when switching channels
by C.Y.M 13 Mar '06

13 Mar '06

When I switch channels in vdr-1.3.44, I noticed that xine-0.7.7 is switching OSD display modes during channel changes. I am currently using "blend clipped" for the OSD display mode, but when I switch channels, xine temporarily goes into X11 overlay mode in the middle of channel change, then goes back to the mode I have selected to use. Any way of preventing xine from temporarily switching to "X11 overlay" during channel changes? Best Regards,

2 5

← Newer
1
...
6
7
8
9
10
11
12
...
16
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr March 2006