vdr March 2018

vdr@linuxtv.org

8 participants
7 discussions

Trouble with DVB-T2 on frontend 1
by Marko Mäkelä 03 Jan '22

03 Jan '22

Hi all, I recently got a USB adapter "Astrometa DVB-T2" that I would like to use with VDR. It comprises two frontends: /dev/dvb/adapter0/frontend0: Realtek RTL2832 (DVB-T) /dev/dvb/adapter0/frontend1: Panasonic MN88473 (DVB-T2 and DVB-C) I guess it is similar to this one; just a slightly different plastic case with some more ventilation holes: http://blog.palosaari.fi/2014/09/naked-hardware-18-astrometa-amdvb-t2-v2.ht… The hardware appears to work fine, once I copied the /lib/firmware/dvb-demod-mn88473-01.fw from somewhere. The firmware upload has failed at least once on the Raspberry Pi 2 (using Linux 4.9.59), but never on another machine that runs a 4.13.0 kernel. I did not yet get the infrared remote control to produce anything in evtest. With dvbv5-zap (after running dvbv5-scan), I can tune into DVB-T2 channels like this: dvbv5-zap -a 0 -f 1 -c dvb_channel.conf 'Yle TV1 HD' -r After this, I can play the video and audio stream on the Raspberry Pi 2: omxplayer /dev/dvb/adapter0/dvr0 Unless I explicitly specify the options -a 0 -f 1, then dvbv5-zap will fail to find any DVB-T2 senders, because it apparently defaults to frontend0, which is DVB-T only. In VDR 2.3.8, I have only been able to view DVB-T from the first frontend. When I did a trick and renamed /dev/dvb/adapter0/frontend1 to frontend0 before starting VDR, VDR no longer complained that the DVB-T2 channels (which I converted from the dvb_channel.conf to channels.conf with dvb-format-convert) not being available, but it did not seem to receive anything from these channels either. Also, after using dvbv5-scan or dvbv5-zap, I sometimes have to invoke w_scan to "reset" the hardware so that VDR can receive DVB-T channels. I would like to receive and record DVB-T and DVB-T2 on this setup. I am willing to try patches or do some programming myself, but I would appreciate some hints to get started. Marko

2 7

French DVB-T Channel IDs vs. EIT Channel IDs
by Patrick Boettcher 25 Jan '20

25 Jan '20

Hi list, since some time (1-2 years) I noticed that the DVB-T channels do not show EPG anymore. I'm not sure what is the root-cause: either it was the migration of French DVB-T to HD (in 2016) or an update of VDR. Anyway, this morning I took the time to figure out what is wrong and here is what I found. In short, the channel-ID generated from the one received in the EIT does not correspond to a known channel-ID from the channel list, and VDR drops the whole section: In cEIT::cEIT (from eit.c) we see tChannelID channelID(Source, getOriginalNetworkId(), getTransportStreamId(), getServiceId()); cChannel *Channel = Channels->GetByChannelID(channelID, true); and channel is NULL in my case. I added some debug prints to GetByChannelID() in the search loop: printf("sid: %d == %d, %s, %s %d\n", Channel->Sid(), sid, (const char *)ChannelID.ToString(), (const char *)Channel->GetChannelID().ToString(), Channel->GetChannelID() == ChannelID); And here is an example of what I get: sid: 517 == 517, T-8442-2-517, T-0-506-517 0 The internal channel ID of vdr reads T-0-506-517. 517 is the SID, 506 is the radio-channel frequency in MHz. This is the right internal channel for this EIT-section. The EIT-channel-ID is telling me that 8442 is the original network ID and 2 might be the radio-channel ID. I tweaked the operator==() of ChannelID to make it work, but not in a contributable manner. How should this be fixed correctly? Is this a regression introduced somewhere? Can it be solved by configuration? Thanks for any help. best regards, -- Patrick.

4 22

VDR ISDB-T support
by Christian Rodriguez 14 Sep '18

14 Sep '18

Hello everyone! I'm from Argentina, and up to last month I've been using VDR 1.7.262 with an ISDB-T USB adapter. It works really good, but the last week I've been trying to upgrade to VDR 2.2 and I've found a problem with ISDB-T cards: they are not supported. As I'm really interested in using VDR, I was digging inside the code and found a partial solution for this problem: as ISDBT is the same as DVBT, I've changed the way delivery system is queried. My changes are applied in a cloned repo at github: https://github.com/chrodriguez/vdr/commit/dadbca57c2dc55c1c53b4fa8f68b56728… That's the only change I've made. Now I can enjoy my fresh upgraded VDR installation!! I think a better refactor should be made, but for now it's working perfectly deployed as a docker container: https://registry.hub.docker.com/u/chrodriguez/vdr Thanks for this wonderfull project! -- Lic. Christian A. Rodriguez @car_unlp

4 7

[vdr 2.3.9] Setting a mark is sluggish
by Oliver Endriss 02 Apr '18

02 Apr '18

Hi, just installed vdr 2.3.9 and noticed that there is a delay when I try to set a recording mark, compared with vdr 2.2.0. Steps to reproduce: - Play a recording. - Press ok to display the progress bar. - Press 0 to set a mark. There is a notable delay between the keypress and the mark showing up. Can someone confirm this? Oliver -- ---------------------------------------------------------------- VDR Remote Plugin 0.7.0: http://www.escape-edv.de/endriss/vdr/ 4 MByte Mod: http://www.escape-edv.de/endriss/dvb-mem-mod/ Full-TS Mod: http://www.escape-edv.de/endriss/dvb-full-ts-mod/ ----------------------------------------------------------------

3 16

[ANNOUNCE] VDR developer version 2.3.9
by Klaus Schmidinger 18 Mar '18

18 Mar '18

VDR developer version 2.3.9 is now available at ftp://ftp.tvdr.de/vdr/Developer/vdr-2.3.9.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.tvdr.de/vdr/Developer/vdr-2.3.8-2.3.9.diff MD5 checksums: 9e4202b046df9ea960d930ce99e967ab vdr-2.3.9.tar.bz2 38a0f436fbed219665725aa2e54a9ca0 vdr-2.3.8-2.3.9.diff Approaching version 2.4.0: ========================== If there are no more serious bug reports, the final version 2.4.0 of VDR shall be released on April 15. So please test this developer version intensely and report any problems you might encounter as soon as possible. The following language files still have the given number of untranslated texts: PLUGINS/src/hello/po/ca_ES.po: 6 PLUGINS/src/hello/po/da_DK.po: 6 PLUGINS/src/hello/po/el_GR.po: 6 PLUGINS/src/hello/po/es_ES.po: 6 PLUGINS/src/hello/po/fr_FR.po: 6 PLUGINS/src/hello/po/hu_HU.po: 6 PLUGINS/src/hello/po/nl_NL.po: 6 PLUGINS/src/hello/po/nn_NO.po: 6 PLUGINS/src/hello/po/pt_PT.po: 6 PLUGINS/src/hello/po/ro_RO.po: 6 PLUGINS/src/hello/po/sl_SI.po: 6 PLUGINS/src/hello/po/sv_SE.po: 6 po/ar.po: 76 po/ca_ES.po: 76 po/cs_CZ.po: 22 po/da_DK.po: 208 po/el_GR.po: 271 po/es_ES.po: 22 po/et_EE.po: 7 po/fi_FI.po: 3 po/fr_FR.po: 22 po/hr_HR.po: 208 po/hu_HU.po: 22 po/it_IT.po: 3 po/lt_LT.po: 22 po/mk_MK.po: 22 po/nl_NL.po: 22 po/nn_NO.po: 336 po/pt_PT.po: 104 po/ro_RO.po: 22 po/ru_RU.po: 10 po/sk_SK.po: 22 po/sl_SI.po: 77 po/sr_RS.po: 76 po/sv_SE.po: 22 po/tr_TR.po: 208 po/uk_UA.po: 22 po/zh_CN.po: 76 If nobody takes care of these, they will remain untranslated in version 2.4.0. The changes since version 2.3.8: - Updated the Italian OSD texts (thanks to Diego Pierotto). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Fixed a possible crash when stopping VDR (thanks to Matthias Senzel for reporting and helping to debug this one). - Fixed handling VPS events outside the LingerLimit, which could cause recordings to stop prematurely (thanks to Johann Friedrichs). - Fixed an invalid lock sequence when trying to remove a deleted recording in case of low disk space. - Now making sure that AssertFreeDiskSpace() is called with the maximum timer priority in case there are several timers recording with different priorities. - The MTD mapper now avoids immediately reusing unique PIDs when switching channels, to prevent possible problems with old data in buffers (thanks to Onur Sentürk). - The function cDevice::GetVideoSystem() (which has been deprecated since version 2.1.6) has been finally removed. - The macros used to control deprecated code or functions have been changed to hold numeric values (0 and 1), so that they can be controlled at compile time, without having to edit the actual source code (suggested by Jasmin Jessich). - The default for DEPRECATED_VDR_CHARSET_OVERRIDE has been set to 0, which means VDR no longer reacts on the environment variable VDR_CHARSET_OVERRIDE. You can add 'DEPRECATED_VDR_CHARSET_OVERRIDE=1' when compiling in order to restore this functionality. However, it is recommended to use the command line option --chartab instead. - The timeout for the channel display is now reset whenever the channel or EPG data changes. - OSD menus now try to keep the offset of the list cursor at a constant position on the screen, even if the list is modified while being displayed. - The LCARS skin's main menu now reacts to changes of the current channel's name. - If an event in the Schedules menu is marked with a 'T' or 'I' and the user presses the Red button to edit the timer, local timers are now preferred over remote timers in case there is more than one timer that will record that event. - Switching the primary device is no longer done via osSwitchDvb (which has been removed), but rather by the main program loop reacting to changes in Setup.PrimaryDVB. - The new SVDRP commands 'LSTD' and 'PRIM' can be used to list all available devices and to switch the primary device (thanks to Thomas Reufer). - Added some comments regarding font height (thanks to Thomas Reufer). - Fixed handling timers during the change from DST to winter time (thanks to Johann Friedrichs). - Added missing checks of 'player' in member functions of cControl, and setting cControl::player to NULL in cDvbPlayerControl::Stop() to avoid a possible crash with plugins that retrieve player information after a replay has been stopped, but before the replay control has been destroyed (thanks to Johann Friedrich). - Now calling Hide() and cStatus::MsgReplaying(..., false) from cReplayControl::Stop(), to inform plugins about an ending replay session before the replay control gets destroyed. - Fixed a possible crash when moving a recording between different volumes (reported by Matthias Senzel). - Fixed positioning the cursor in the Recordings menu when moving a recording between different volumes. - Added a note to PLUGINS.html about writing log messages in English. - Fixed a deadlock when moving a folder containing several recordings between different volumes (reported by Matthias Senzel). - Fixed positioning to the current item when changing the sort mode in the Recordings menu, in case there is a LastReplayed recording. - The CAM menu is now automatically closed when the current channel is switched (suggested by Dietmar Spingler). - Fixed a lengthy write lock on the Recordings list in case of moving a folder with more than one recording (thanks to Matthias Senzel). - If TS packets are not accepted by the output device in Transfer Mode, this is now reported only once per minute in the log file. - The new setup option "OSD/Sorting direction for recordings" can be used to switch the sequence in which recordings are presented in the "Recordings" menu between ascending (oldest first) and descendeng (newest first) (thanks to Matthias Senzel). - When moving recordings between volumes, the "Recordings" menu now displays those items that have not yet been moved completely as non-selectable. This avoids situations where trying to play such a recording might fail. - Fixed canceling moving a folder with several recordings between volumes. - When moving a recording to a different folder, the cursor is no longer placed on the new location of the recording, but rather stays in the original folder (suggested by Matthias Senzel). If the original folder got empty by moving away the last recording it contained, the cursor is moved up until a non empty folder is found. - Changed the log message ""ERROR: copying directory '%s' to '%s' ended prematurely" from "error" to "info", because any actual error would have already been reported before this (suggested by Matthias Senzel). - When selecting a folder for a recording or timer, it is now possible to open a folder even if it doesn't contain any subfolders (suggested by Matthias Senzel). - Fixed a possible deadlock when detaching a receiver from a device. - Moved any locking from cutter.c into recording.c, to avoid a problem with locking the Recordings list (reported by Matthias Senzel). - Now using the 'example' macro in vdr.5 (thanks to Chris Mayo). - Now unlocking the Recordings list before displaying an error message in cMenuPathEdit::ApplyChanges() and cReplayControl::Stop() (reported by Matthias Senzel). - Fixed a possible deadlock when quickly zapping through encrypted channels (reported by Jörg Wendel). - The new function cStatus::MarksModified() can be implemented by plugins to get informed about any modifications to the editing marks of the currently played recording (based on a patch from Jörg Wendel). - Fixed handling editing marks in the replay progress display, in case the marks are deleted via the Info/Edit menu of the currently played recording (the progress display still displayed them). - Limited some CAM related log messages to the actual master CAM, if any. - The Perl script 'peerdemo' shows how one can find all the VDRs in the local network using the peer connection mechanism. - Added the UPDATE-2.4.0 file. - Making sure cSVDRPClient::Process() reads the entire reply once it started reading, even if no Response parameter is given. - Replaced the warning regarding the open SVDRP port in the INSTALL file with a remark about using svdrphosts.conf to completely disable SVDRP access. - Added a note about the fixed UDP port for SVDRP discovery to vdr.1. - Fixed updating the Timers menu after turning a local timer on/off with the Red button. - Fixed keeping the cursor position in the Recordings menu in case a timer starts recording while the menu is open. - When a timer is newly created in the Timers menu, it now immediately appears at the correct position in the list, rather than first being added at the end and then jumping to the proper offset. - Fixed getting the info of a newly edited recording (reported by Matthias Senzel). - Improved calculating signal strength and quality (thanks to Helmut Binder). - While a timer is recording, the file '.timer' in the recording directory now contains the full id of the timer that is currently recording into this directory. This is used to determine whether a timer is still recording on a remote VDR when deleting a recording from the Recordings menu. - Fixed handling SVDRP peering for more than one instance of VDR on the same machine, and improved logging and debug output. - Fixed case inconsistency with SVDRPDefaultHost in config.c. - Added a section about the '.sort' file to vdr.5. - Initiating the client side of a peer-to-peer SVDRP connection is now done with the new SVDRP command CONN instead of using the UDP port with the server's address. This change requires that all VDRs that shall take part in a peer-to-peer network need to be updated to this version. - Moved handling remote timers into cSVDRPClientHandler::ProcessConnections(). - Combined Start/StopSVDRPServer/ClientHandler() into Start/StopSVDRPHandler(). - Updated the Polish OSD texts (thanks to Tomasz Maciej Nowak). - When remote timers are fetched from a peer VDR, we no longer blindly delete and re-add them, but rather compare them and make only the minimum necessary changes. - Fixed the CompareInts() function. - Disabled the use of posix_fadvise() when reading (i.e. replaying), since it caused stuttering replay in fast forward and fast rewind mode in case the video directory is mounted via NFS. You can re-enable it by setting the macro USE_FADVISE_READ to 1 in tools.c. - Modified cStateLock's SetExplicitModify() and IncState() (changed to SetModified()) to allow for the introduction of syncing a separate cStateKey to a cStateLock. - Assigning events to timers no longer triggers sending a POLL to all peer VDRs. - When making modifications to remote timers, the local VDR no longer sends a POLL to all remote VDRs. - Fixed removing a cStateKey from a cStateLock (setting StateKey.stateLock = NULL was done too late, after the lock had already been released). - Now writing the info file before attaching the recorder to the device, to make sure it is present when the recorder needs to update the fps value. - Making sure the Schedules menu has a proper title, even if it is empty. - Removed sending the SVDRP command UPDR to peer VDRs whenever a change is made to the recordings in the video directory (which was introduced in version 2.3.8), because it triggered re-reading the video directory too fast. - Improved handling VPS timers to better react to EPG changes during an ongoing recording. - Commented out the logging in cMarks::Align(), to avoid log entries in case of editing marks that are not generated by VDR itself, and thus may be a little off (suggested by Jörg Wendel). You can activate this line again for debugging if necessary. - Made the input buffer in cSVDRPClient dynamic. - Fixed handling parameters in the S2SatelliteDeliverySystemDescriptor and T2DeliverySystemDescriptor that were overwritten when parsing the SatelliteDeliverySystemDescriptor or TerrestrialDeliverySystemDescriptor, respectively. - Modified cMenuTimers::Delete() to avoid a lengthy lock on the Timers list while prompting the user. Have fun! Klaus

3 3

How to open the Hauppauge curved remote for cleaning??
by Timothy D. Lenz 13 Mar '18

13 Mar '18

I know it can be done, I've done it before. I've cleaned lots of other remotes. But there is some trick to getting one of these open and I can't figure it out. The "OK" butting needs cleaning.

1 0

Channels getting deleted on new scan
by Timothy D. Lenz 12 Mar '18

12 Mar '18

So I'm using an old version of VDR, looks like 1.7.15 with the ATSC plugin. Just don't have the time to update everything. I noticed that the 9x locals stopped getting guide data. I did a new scan and the new list worked for 9x but would wipe 58x channels. comparing them, they changed the next to last field entry for 9x from 215 to 207 which is the same as for the 58x. That's the only reason I see. I can switch to 9x ----------------------------------------------- :@91 KGUN-DT,KGUN-DT:189028615:M10:A:0:49=2:0;53=esl@106,52=eng@106:0:0:3:0:215:0 :@92 Laff ,Laff :189028615:M10:A:0:65=2:0;68=eng@106:0:0:4:0:215:0 :@93 Antenna,Antenna:189028615:M10:A:0:81=2:0;84=eng@106:0:0:5:0:215:0 ----------------------------------------------- :@581 KWBA-HD,KWBA-HD:653028615:M10:A:0:49=2:0;52=eng@106,53=esl@106:0:0:3:0:207:0 :@582 LATV,LATV:653028615:M10:A:0:65=2:0;68=eng@106:0:0:4:0:207:0 :@583 ThisTV,ThisTV:653028615:M10:A:0:81=2:0;84=eng@106:0:0:5:0:207:0 ----------------------------------------------- Old List: :@41 KVOA,KVOA:527028615:M10:A:0:49=2:0;52=eng@106,53=esl@106:0:0:1:0:211:0 :@42 COZI-TV,COZI-TV:527028615:M10:A:0:65=2:0;68=eng@106:0:0:2:0:211:0 :@61 PBS HD,PBS HD:569028615:M10:A:0:49=2:0;52=eng@106,56=eng@106:0:0:1:0:213:0 :@62 V-Me,V-Me:569028615:M10:A:0:65=2:0;68=eng@106,72=eng@106:0:0:2:0:213:0 :@63 ReadyTV,ReadyTV:569028615:M10:A:0:81=2:0;84=eng@106,88=eng@106:0:0:3:0:213:0 :@91 KGUN-DT,KGUN-DT:189028615:M10:A:0:49=2:0;53=esl@106,52=eng@106:0:0:3:0:215:0 :@92 Laff ,Laff :189028615:M10:A:0:65=2:0;68=eng@106:0:0:4:0:215:0 :@93 Antenna,Antenna:189028615:M10:A:0:81=2:0;84=eng@106:0:0:5:0:215:0 :@111 KMSB-HD,KMSB-HD:539028615:M10:A:0:49=2:0;52=eng@106,53=esl@106:0:0:1:0:217:0 :@112 Movies,Movies:539028615:M10:A:0:65=2:0;68=eng@106:0:0:2:0:217:0 :@113 Justice,Justice:539028615:M10:A:0:81=2:0;84=eng@106:0:0:3:0:217:0 :@131 KOLD DT,KOLD DT:581028615:M10:A:0:49=2:0;52=eng@106,53=esl@106:0:0:3:0:219:0 :@132 Me TV,Me TV:581028615:M10:A:0:65=2:0;68=eng@106:0:0:4:0:219:0 :@133 Grit,Grit:581028615:M10:A:0:81=2:0;84=eng@106:0:0:5:0:219:0 :@141 KUDF-LP,KUDF-LP:473028615:M10:A:0:81=2:0;84=esl@106:0:0:3:0:8263:0 :@181 KTTU-HD,KTTU-HD:503028615:M10:A:0:49=2:0;52=eng@106:0:0:1:0:221:0 :@182 Estrell,Estrell:503028615:M10:A:0:65=2:0;68=esl@106:0:0:2:0:221:0 :@211 HSN,K21CX-D:515028615:M10:A:0:481=2:0;482=eng@106:0:0:1:0:1:0 :@271 PBS HD,PBS HD:557028615:M10:A:0:49=2:0;52=eng@106,56=eng@106:0:0:1:0:223:0 :@272 KIDS,KIDS:557028615:M10:A:0:65=2:0;68=eng@106,72=eng@106:0:0:2:0:223:0 :@273 WORLD,WORLD:557028615:M10:A:0:81=2:0;84=eng@106,88=eng@106:0:0:3:0:223:0 :@341 KFTU-CD,KFTU-CD:497028615:M10:A:0:49=2:0;52=esl@106,53=mul@106:0:0:1:0:7037:0 :@342 KUVE-HD,KUVE-HD:497028615:M10:A:0:65=2:0;68=esl@106,69=mul@106:0:0:2:0:7037:0 :@401 KHRR-DT,KHRR-DT:629028615:M10:A:0:49=2:0;52=esl@106:0:0:3:0:225:0 :@402 Exitos ,Exitos :629028615:M10:A:0:65=2:0;68=esl@106:0:0:4:0:225:0 :@403 ION ,ION :629028615:M10:A:0:81=2:0;84=eng@106:0:0:5:0:225:0 :@421 KUVE-CD,KUVE-CD:641028615:M10:A:0:49=2:0;52=esl@106,53=mul@106:0:0:1:0:9307:0 :@422 KFTU,KFTU:641028615:M10:A:0:65=2:0;68=esl@106,69=mul@106:0:0:2:0:9307:0 :@423 KUVE-D3,KUVE-D3:641028615:M10:A:0:81=2:0;84=eng@106:0:0:3:0:9307:0 :@424 KUVE-D4,KUVE-D4:641028615:M10:A:0:97=2:0;100=eng@106:0:0:4:0:9307:0 :@461 KUVE-DT,KUVE-DT:665028615:M10:A:0:49=2:0;52=esl@106,53=mul@106:0:0:1:0:179:0 :@462 KFTU-HD,KFTU-HD:665028615:M10:A:0:65=2:0;68=esl@106,69=mul@106:0:0:2:0:179:0 :@463 getTV,getTV:665028615:M10:A:0:81=2:0;84=eng@106:0:0:3:0:179:0 :@464 ESCAPE,ESCAPE:665028615:M10:A:0:97=2:0;100=eng@106:0:0:4:0:179:0 :@581 KWBA-HD,KWBA-HD:653028615:M10:A:0:49=2:0;52=eng@106,53=esl@106:0:0:3:0:207:0 :@582 LATV,LATV:653028615:M10:A:0:65=2:0;68=eng@106:0:0:4:0:207:0 :@583 ThisTV,ThisTV:653028615:M10:A:0:81=2:0;84=eng@106:0:0:5:0:207:0 ----------------------------------------------- New List: :@41 KVOA,KVOA:527028615:M10:A:0:49=2:0;52=eng@106,53=esl@106:0:0:1:0:211:0 :@42 COZI-TV,COZI-TV:527028615:M10:A:0:65=2:0;68=eng@106:0:0:2:0:211:0 :@43 ESCAPE,ESCAPE:527028615:M10:A:0:81=2:0;84=eng@106:0:0:3:0:211:0 :@61 PBS HD,PBS HD:569028615:M10:A:0:49=2:0;52=eng@106,56=eng@106:0:0:1:0:213:0 :@62 KIDS,KIDS:569028615:M10:A:0:65=2:0;68=eng@106,72=eng@106:0:0:2:0:213:0 :@63 PBS 6+,PBS 6+:569028615:M10:A:0:81=2:0;84=eng@106,88=eng@106:0:0:3:0:213:0 :@91 KGUN-HD,KGUN-HD:189028615:M10:A:0:49=2:0;53=esl@106,52=eng@106:0:0:3:0:207:0 :@92 LAFF,LAFF:189028615:M10:A:0:65=2:0;68=eng@106:0:0:4:0:207:0 :@93 Antenna,Antenna:189028615:M10:A:0:81=2:0;84=eng@106:0:0:5:0:207:0 :@94 Bounce,Bounce:189028615:M10:A:0:97=2:0;100=eng@106:0:0:6:0:207:0 :@111 KMSB-HD,KMSB-HD:539028615:M10:A:0:49=2:0;52=eng@106,53=esl@106:0:0:1:0:217:0 :@112 Movies,Movies:539028615:M10:A:0:65=2:0;68=eng@106:0:0:2:0:217:0 :@113 Justice,Justice:539028615:M10:A:0:81=2:0;84=eng@106:0:0:3:0:217:0 :@114 Quest,Quest:539028615:M10:A:0:97=2:0;100=eng@106:0:0:4:0:217:0 :@131 KOLD DT,KOLD DT:581028615:M10:A:0:49=2:0;52=eng@106,53=esl@106:0:0:3:0:219:0 :@132 Me TV,Me TV:581028615:M10:A:0:65=2:0;68=eng@106:0:0:4:0:219:0 :@133 Grit,Grit:581028615:M10:A:0:81=2:0;84=eng@106:0:0:5:0:219:0 :@141 KUDF-HD,KUDF-HD:473028615:M10:A:0:49=2:0;52=esl@106:0:0:1:0:8263:0 :@142 Telemax,Telemax:473028615:M10:A:0:65=2:0;68=esl@106:0:0:2:0:8263:0 :@143 GNTVLat,GNTVLat:473028615:M10:A:0:81=2:0;84=esl@106:0:0:3:0:8263:0 :@144 GoodNws,GoodNws:473028615:M10:A:0:97=2:0;100=eng@106:0:0:4:0:8263:0 :@181 KTTU-HD,KTTU-HD:503028615:M10:A:0:49=2:0;52=eng@106:0:0:1:0:221:0 :@182 Estrell,Estrell:503028615:M10:A:0:65=2:0;68=esl@106:0:0:2:0:221:0 :@183 H and I,H and I:503028615:M10:A:0:81=2:0;83=eng@106:0:0:3:0:221:0 :@211 HSN,K21CX-D:515028615:M10:A:0:481=2:0;482=eng@106:0:0:1:0:1:0 :@271 PBS HD,PBS HD:557028615:M10:A:0:49=2:0;52=eng@106,56=eng@106:0:0:1:0:223:0 :@272 KIDS,KIDS:557028615:M10:A:0:65=2:0;68=eng@106,72=eng@106:0:0:2:0:223:0 :@273 PBS 6+,PBS 6+:557028615:M10:A:0:81=2:0;84=eng@106,88=eng@106:0:0:3:0:223:0 :@341 KFTU-CD,KFTU-CD:497028615:M10:A:0:49=2:0;52=esl@106,53=mul@106:0:0:1:0:7037:0 :@342 KUVE-HD,KUVE-HD:497028615:M10:A:0:65=2:0;68=esl@106,69=mul@106:0:0:2:0:7037:0 :@401 KHRR-DT,KHRR-DT:629028615:M10:A:0:49=2:0;52=esl@106:0:0:3:0:225:0 :@402 Exitos ,Exitos :629028615:M10:A:0:65=2:0;68=esl@106:0:0:4:0:225:0 :@403 ION ,ION :629028615:M10:A:0:81=2:0;84=eng@106:0:0:5:0:225:0 :@421 KUVE-CD,KUVE-CD:641028615:M10:A:0:49=2:0;52=esl@106,53=mul@106:0:0:1:0:9307:0 :@422 KFTU,KFTU:641028615:M10:A:0:65=2:0;68=esl@106,69=mul@106:0:0:2:0:9307:0 :@423 KUVE-D3,KUVE-D3:641028615:M10:A:0:81=2:0;84=eng@106:0:0:3:0:9307:0 :@424 KUVE-D4,KUVE-D4:641028615:M10:A:0:97=2:0;100=eng@106:0:0:4:0:9307:0 :@461 KUVE-DT,KUVE-DT:665028615:M10:A:0:49=2:0;52=esl@106,53=mul@106:0:0:1:0:179:0 :@462 KFTU-HD,KFTU-HD:665028615:M10:A:0:65=2:0;68=esl@106,69=mul@106:0:0:2:0:179:0 :@463 getTV,getTV:665028615:M10:A:0:81=2:0;84=eng@106:0:0:3:0:179:0 :@464 ESCAPE,ESCAPE:665028615:M10:A:0:97=2:0;100=eng@106:0:0:4:0:179:0 :@581 KWBA-HD,KWBA-HD:653028615:M10:A:0:49=2:0;52=eng@106,53=esl@106:0:0:3:0:207:0 :@582 LATV,LATV:653028615:M10:A:0:65=2:0;68=eng@106:0:0:4:0:207:0 :@583 ThisTV,ThisTV:653028615:M10:A:0:81=2:0;84=eng@106:0:0:5:0:207:0

4 15

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr March 2018