vdr

vdr@linuxtv.org

6729 discussions

[ANNOUNCE] vdr-actuator-0.0.8 plugin
by Luca Olivetti 13 Feb '05

13 Feb '05

Hello, I'm releasing a new version (0.0.8) of the "actuator" plugin available at http://club.telepolis.com/l.o/vdr/ This plugin controls a linear actuator (or an horizon to horizon one) through the parallel port with a simple circuit. CHANGES: - Implement new (in vdr-1.3.20) method Stop - Removed the note about the dxr3 shutdown problem (saving the dish position early with the Stop method makes the problem irrelevant) - Skip non satellite sources in main menu - Changed pid assignment in cMainMenuActuator::Tune() to (hopefully) avoid problems with the new audio pid management in vdr - Added "Scan satellite" option (idea shamelessly stolen from kikko77(a)altervista.org, author of the channelscan plugin) - Changed the 'position-display' patch (adapted for vdr-1.3.20 and avoids overwriting the osd of the newly entered channel number if the dish is moving) - New parameter MinRefresh, to avoid screen artifacts with a dxr3 Bye -- - Yo también quiero una Europa libre de Patentes de Software - - I want a Software Patents Free Europe too! And you? - --------------------------------------------------------------- EuropeSwPatentFree - http://EuropeSwPatentFree.hispalinux.es

1 0

Problem with Premiere option channes
by Dominik Strasser 13 Feb '05

13 Feb '05

Hi all, one last problem remains with my VDR setup: the Premiere option channels (for Premiere Direkt/Fussball) don't work fully. Now with the Bundesliga playing, my channel.conf looks like this (with "update channels" set to "add new channels"): D 1 - 13|45:346:M64:C:6900:0:0:0:0:212:133:1:0 FCK - HANSA:346:M64:C:6900:0:0:0:0:245:133:3:0 HSV - VfB:346:M64:C:6900:0:0:0:0:241:133:3:0 BRE - BMG:346:M64:C:6900:0:0:0:0:244:133:3:0 D 2 - 14|30:346:M64:C:6900:0:0:0:0:211:133:17:0 D 3 - 12|30:346:M64:C:6900:2303:2304=deu,2305=deu;2307=deu:0:1702,1801,1722:210:133:4:0 BVB - BO:346:M64:C:6900:0:0:0:0:240:133:3:0 FREI - H96:346:M64:C:6900:0:0:0:0:243:133:3:0 Info-Kanal:346:M64:C:6900:3327:3328=deu,3329=deu:0:1722,1801,1702:209:133:4:0 BER - FCN:346:M64:C:6900:3071:3072=deu,3073=deu:0:1801,1702,1722:208:133:4:0 Additionally, I have to manually enter my PIN for the two channels that can be shown (the last two). I already started with an empty (repectively with 1 channel per transponder) channels.conf. It doesn't help. I have an AlphaCAM, with a Premiere P02 card which work fine under WINDVBLIVE (with the option channels), so I would rule out problems with these. As you see, some PID's are updated while others aren't. syslog shows messages about changing the PIDs for the working channels, but nothing for the others. Regards Dominik

1 0

[PATCH] Ignore leading special char in recordings
by Patrick Gleichmann 13 Feb '05

13 Feb '05

Hi, just a 5 minute patch that skips the first character if it's not alphanumeric, so basically '%' and '@' when the recordings are sorted. regards patrick (aka ravemax)

2 1

replay-display with playlist ?
by vdr＠pfroen.de 13 Feb '05

13 Feb '05

Hello List, The mp3-plugin provides the possibility to view the player with the current playlist. This is only possible in "classic-view"-mode, as this view is not skinable. As far i understood this, the problem is, that VDR does not provide such a player and therfore the Plugin has to paint it itselfe. @Klaus Is there any hope, that you implement such a view into VDR-core ? I know, that many users would love to have this feature back within text2skin look & feel ... and I'm looking forward to implement it into DeepBlue. Stefan

1 0

upmixing dvb audio
by David Thompson 13 Feb '05

13 Feb '05

Hello: FIrst I want to thank all of you again for your help. My dvb-t pci premium system with vdr is now working absolutely great. Have one last question which is slightly off topic but thought someone here must have dealt with it before. Would like to upmix the 2 channel dvb audio from my ttpci premium card that is fed into my soundblaster live 5.1 soundcard via the line in port. Before I used a ttusb budget device with vdr xine and got used to the 5.1 upmixed audio! Anyone know how to do this? Have looked in vain thus far for a solution .. I am running ALSA - kernel 2.6.7 - emu10k1 driver - soundblaster live 5.1 - analogue 5.1 speakers. Cheers, David

1 0

Re: [vdr] Re: problem with 2 card system
by Stefan Taferner 13 Feb '05

13 Feb '05

On Friday 11 February 2005 18:47, Vladimir Shved wrote: > > -----Original Message----- > > From: vdr-bounce(a)linuxtv.org [mailto:vdr-bounce@linuxtv.org] On Behalf Of > > Stefan Taferner > > Sent: Tuesday, February 08, 2005 2:58 PM > > To: vdr(a)linuxtv.org > > Subject: [vdr] Re: problem with 2 card system > > > > On Tuesday 08 February 2005 12:29, Peter Juszack wrote: > > > I just got a second DVB-S card for my VDR. > > > > > > Nexus-S FF + Technisat Skystar II Rev 2.6 > > > > I do not know which Linux kernel you use nor which dvb driver > > version (hint ;) .... but I had problems with 2.6 kernels > > until I installed 2.6.10. Not Skystar, but Nexus-S + Nova-S. > > > > Kind regards, > > Stefan > > The thing is I was using 2.6.10 kernel w/ cvs dvb drivers but I think I > fixed it. I moved the card to different PCI slot and everything started to > work reliably. Just weird... Then you had a problem with shared interrupts. --Stefan

1 0

Re: [vdr] Re: problems with radio recordings
by Andreas Regel 13 Feb '05

13 Feb '05

Klaus Schmidinger wrote: > Wolfgang Rohdewald wrote: > >> On Dienstag 08 Februar 2005 15:16, Klaus Schmidinger wrote: >> >>>> 2. When replaying a radio recording and doing a fast forward, vdr exits with a segfault. The progress bar always shows a value between 10 and 11 minutes. Here is the backtrace for this error: >> >> >> >> about the same here but with 1.3.20. fast forward worked, fast backward >> crashes: >> > > Which radio channel did you record this on? > > My tests on ANTENNE BAYERN didn't show any such problem, so maybe > it depends on the actual channel. I tried with YOU FM, hr2 and Fritz, all with the same result. Andreas

1 0

vdr 1.3.20 & sc 0.4.4
by Drac71 LeConte 13 Feb '05

13 Feb '05

Hi I am trying vdr 1.3.20 with sc 0.4.4. On 91W, channels get freezed ater 5-10 mn, and sc reports Code: ecm extra data update... it gets opened after a long time and redo same thing again Sof*C*m is OK. Any idea .. ?? @drac _________________________________________________________________ Powerful Parental Controls Let your child discover the best the Internet has to offer. http://join.msn.com/?pgmarket=en-ca&page=byoa/prem&xAPID=1994&DI=1034&SU=ht… Start enjoying all the benefits of MSN® Premium right now and get the first two months FREE*.

1 0

Re: [vdr] Re: Streamdev Client
by Chad Flynt 13 Feb '05

13 Feb '05

Well, next problem, if anyone has any thoughts. VDR runs now! Thanks Anssi, but I can't get Xine to connect to it. I am sure I am just doing something stupid, so any ideas are appreciated. Here is proof that the vdr-xine plugin is running I assume: /tmp/vdr-xine$ ls external.control stream stream.event external.result stream.control stream.result And I am using this as my command to start xine: export LD_LIBRARY_PATH=/usr/local/lib:$LD_LIBRARY_PATH /usr/local/src/xine.cvs/xine-ui/bin/xine vdr:/tmp/vdr-xine/stream#demux:mpeg_pes And Xine GUI starts and I get an error of: - xine engine error - There is no input plugin available to handle 'vdr:/ Maybe MRLsyntax is wrong or file/stream source doesn't exist. I have ran xine by itself on an mpg file and verified the plugin for VDR exists, it does mention right after it loads the VDR plugin that it is code 15 and expecting 16, but I assume that is normal since I wasn't connecting to a VDR stream. Any thoughts or ideas are appreciated. Chad Anssi Hannula wrote: > Chad Flynt wrote: > >> How do you use the streamdev client properly. I am not understanding >> the instructions or it is just that the patch I am using isn't >> working properly possibly. I am trying to run it on a laptop just >> for playing, do I have to for testing have xine installed or should >> vdr at least run with the client by itself just to start with, I will >> end up with Xine on but just testing bits and pieces first. I >> compiled and am starting with only -Pstreamdev-client and I get a >> message of such: >> >> vdr: ./PLUGINS/lib/libvdr-streamdev-client.so.1.3.20: undefined >> symbol: _ZN16cMenuWhatsOnItemC1EPK6cEventP8cChannel >> >> Just trying to find out what I am doing wrong, I haven't done >> anything to the conf files yet didn't know if I could set up the >> server through OSD. My server on my main vdr box runs great. >> Thanks for any assistance. > > > This is because of enAIO patch (though I think streamdev does > something wrong as it has this undefined symbol). Here's a patch for VDR. > >------------------------------------------------------------------------ > >--- vdr-1.3.20-bef-enaiofix/menu.c 2005-02-09 22:32:45.000000000 +0200 >+++ vdr-1.3.20/menu.c 2005-02-10 17:34:58.000000000 +0200 >@@ -961,7 +961,8 @@ private: > public: > const cEvent *event; > const cChannel *channel; >- cMenuWhatsOnItem(const cEvent *Event, cChannel *Channel, bool Now = false); >+ cMenuWhatsOnItem(const cEvent *Event, cChannel *Channel); >+ cMenuWhatsOnItem(const cEvent *Event, cChannel *Channel, bool Now); > }; > > const char * const cMenuWhatsOnItem::ProgressBar[7] = >@@ -975,6 +976,11 @@ const char * const cMenuWhatsOnItem::Pro > "[||||||]" > }; > >+cMenuWhatsOnItem::cMenuWhatsOnItem(const cEvent *Event, cChannel *Channel) >+{ >+ cMenuWhatsOnItem(Event, Channel, false); >+} >+ > cMenuWhatsOnItem::cMenuWhatsOnItem(const cEvent *Event, cChannel *Channel, bool Now) > { > event = Event; > >

2 1

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr