Hi,
On Thu, Feb 15, Dieter Bloms wrote:
no diseqc setup works stabel for me :( Also the Full DiSEqC sequence from default diseqc.conf doesn't work a few hours after reboot and sometime it doesn't work directly after reboot. But I can switch the channel with szap and get the TS stream from /dev/dvb/adapter1/dvr0 every time, even vdr can't record I only stop vdr and do not a reload of the driver.
I did some tests with szap:
o I can only get the TS stream with the default lnb type or -l UNIVERSAL o if I use another lnb type like ENHANCED, I can switch, but don't get any data. o The ioctls are the same if I use diseqc with vdr, but as I said before, I didn't get any data a few hours after reboot of the system, and sometime I didn't get any data directly after reboot. o If I use szap, I can switch the channels and get the ts stream every time (via cat /dev/dvb/adapter1/dvr0 > /tmp/bla). o the first status is 01 and it has no lock all others are 1f and it has a lock (as seen below). o when I call szap the second time (with the same channel) the first status is 01 and then 1f, too. o maybe vdr does have to wait a longer time ?
I can reproduce following:
vdr can record from senders on V polarisation like sat1, prosieben ... even without reloading the driver. vdr can not record from any sender on H polarisation like ard, zdf ... even with reloading the driver it doesn't work. This explains, that I got some recording and some not.
Does anybody know what can be the different between H and V polarisation ?