So you are running Linux on tablet instead android ? What version of Linux ? I just installed arch Linux arm on Seagate goflex with 3tb hard drive. I used vdr4arch git and it compiled fine including sc processor : model name : Feroceon 88FR131 rev 1 (v5l) Features : swp half thumb fastmult edsp CPU implementer : 0x56 CPU architecture: 5TE CPU variant : 0x2 CPU part : 0x131 CPU revision : 1 Hardware : Seagate GoFlex Home Revision : 0000 Serial : 0000000000000000 [root@alarm ~]#
On Thu, Jun 12, 2014 at 12:28 PM, cedric.dewijs@telfort.nl < cedric.dewijs@telfort.nl> wrote:
Hi All,
I have got the sc plugin now running on my Allwinner A20. It's now recording 7 TV shows at the same time :-) It turns out the sc directory still had some old object files from my last compile on the DNS323 NAS. As those do not have the same CPU, this creates a file that does not run.
For reference, here are the steps I have taken:
- Get the source and the debian patch:
$ hg clone http://85.17.209.13:6100/sc $ wget http://vdrbox.lautre.net/fichiers/VDR/debianize-sc/sc-debian-package-03062$ $ cd sc patch -p1 < ../sc-debian-package-03062011.diff 2) Apply the patches I've send in the previous mail: patch -p1 < ../sc-patches/sc-dvbcsa-camc.patch patch -p1 < ../sc-patches/sc-dvbcsa-camh.patch patch -p1 < ../sc-patches/sc-dvbcsa-devicec.patch patch -p1 < ../sc-patches/sc-dvbcsa-makefile.patch 3) back-up the patched makefile: $ cp Makefile ../ 4) start the compile process. This step will fail. dpkg-buildpackage -us -uc -b 5) restore the Makefile from the backup: cp ../Makefile . 6) start the compile process again. This time the compile will succeed. dpkg-buildpackage -us -uc -b 7) in the parent directory the 2 dep files are present cd .. 8) as root, install the 2 .deb files: # dpkg -i vdr-plugin-sc_*.deb libvdr-sc-cardclient_*.deb For more information, see the debian wiki, under VDR:
https://wiki.debian.org/VDR#Install_vdr-plugin-sc_and_libvdr-sc-cardclient_f...
Kind regards, Cedric
----Origineel Bericht---- Van : cedric.dewijs@telfort.nl Datum : 11/06/2014 20:48 Aan : vdr@linuxtv.org Onderwerp : [vdr] allwinner A20: vdr-plugin-sc does compile, but binary incompatible
Hi All,
I have an allwinner A20 device. I'm trying to use it as my new VDR server. VDR runs OK, I can watch and record free to air dvb-t streams. Now I would like to watch the encrypted TV shows. Therefore I am trying to build vdr-plugin-sc and libvdr-sc-cardclient from source.
The allwinnerA20 is an ARM processor. this processor does not have the SSE instructions FFdeCSA needs. Therefore I have patched the source, so it doesn't use FFdeCSA, but instead uses dvbcsa. The resulting code compiles without errors. I have done all the compiling on the A20 device itself.
When I try to start VDR with the plugins, I see the following error: # invoke-rc.d vdr restart Restarting Linux Video Disk Recorder: vdr Searching for plugins (VDR 1.7.28/1.7.28) (cache miss): xineliboutput WARNING: The following plugins have been left out due to really binary incompatibility: sc. ldd confirms there's something wrong with the .so in question: # ldd /usr/lib/vdr/plugins/libvdr-sc.so.1.7.28 not a dynamic executable
I have attached the patches I've made to the source, and the output on the terminal while compiling. Could you please take a look at it? kind regards, Cedric
My hardware: olimex A20-OLINUXINO-MICRO
My versions: $ uname -a Linux a20-OLinuXino 3.4.67+ #6 SMP PREEMPT Fri Nov 1 17:32:40 EET 2013 armv7l GNU/Linux $ cat /proc/cpuinfo Processor : ARMv7 Processor rev 4 (v7l) processor : 0 BogoMIPS : 2011.05
processor : 1 BogoMIPS : 2011.05
Features : swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 4
Hardware : sun7i Revision : 0000 Serial : 0000000000000000
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr