Hi,
Just add new satellite to your diseqc.conf file and use rotorng plugin to scan satellite or transponders.
Below is an example of my diseqc.conf. Here Sirius is on LNB1 output, LNB2 is Amos, LNB4 is HotBird. LNB3 is commented out, there is nothing on LNB3 output. Take a look carefully on a structure and write your own diseqc.conf.
# Sirius LNB 1 S4.8E 11700 V 9750 t v W15 [E0 10 38 F0] [E1 10 38 F0] W15 t S4.8E 99999 V 10600 t v W15 [E0 10 38 F1] [E1 10 38 F1] W15 T S4.8E 11700 H 9750 t V W15 [E0 10 38 F2] [E1 10 38 F2] W15 t S4.8E 99999 H 10600 t V W15 [E0 10 38 F3] [E1 10 38 F3] W15 T # Amos LNB 2 S4.0W 11700 V 9750 t v W15 [E0 10 38 F4] [E1 10 38 F4] W15 t S4.0W 99999 V 10600 t v W15 [E0 10 38 F5] [E1 10 38 F5] W15 T S4.0W 11700 H 9750 t V W15 [E0 10 38 F6] [E1 10 38 F6] W15 t S4.0W 99999 H 10600 t V W15 [E0 10 38 F7] [E1 10 38 F7] W15 T # Sirius LNB 3 #S5E 11700 V 9750 t v W15 [E0 10 38 F8] [E1 10 38 F8] W15 t #S5E 99999 V 10600 t v W15 [E0 10 38 F9] [E1 10 38 F9] W15 T #S5E 11700 H 9750 t V W15 [E0 10 38 FA] [E1 10 38 FA] W15 t #S5E 99999 H 10600 t V W15 [E0 10 38 FB] [E1 10 38 FB] W15 T # Hotbird LNB 4 S13.0E 11700 V 9750 t v W15 [E0 10 38 FC] [E1 10 38 FC] W15 t S13.0E 99999 V 10600 t v W15 [E0 10 38 FD] [E1 10 38 FD] W15 T S13.0E 11700 H 9750 t V W15 [E0 10 38 FE] [E1 10 38 FE] W15 t S13.0E 99999 H 10600 t V W15 [E0 10 38 FF] [E1 10 38 FF] W15 T
Yarema
2011/6/12 Artem Makhutov artem@makhutov.org
Hello,
I would like to receive one more sattelite using VDR. I have added one more LNB to my sat dish pointing to AMOS S4.0W.
I have manually added some channels to channels.conf and vdr has pick them up and has updated channels.conf, but a lot of channels are missed there.
It looks like the NIT table is incorrect on Amos and VDR does not find all channels. What is the best way to perform a full scan on vdr, or just to add the missing transponders?
Thanks, Artem
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr