On 24.01.2010 17:24, André Weidemann wrote:
Hi Klaus,
On 24.01.2010 16:28, Klaus Schmidinger wrote:
On 11.01.2010 06:19, VDR User wrote:
On Sun, Jan 10, 2010 at 12:30 AM, Giampaolo Sicagpsica@tin.it wrote:
My Samsung linux based TV set (http://samygo.sourceforge.net/) won't play .TS without PCR (both h.264 and mpeg2). Windows media player in windows 7 can play mpeg2 and H.264 .TS only with PCR pid. I haven't tried any other player.
I would say your problem should be addressed within your hacked tv firmware. However, if there is a real need for PCR then I'm sure Klaus will consider it.
In an attempt to debug this I just made some recordings from channels with VPID==PPID and VPID!=PPID, namely
RTL Television,RTL;RTL World:12187:hC34M2O0S0:S19.2E:27500:163=2:104=deu;106=deu:105:0:12003:1:1089:0
BVN;CANALDIGITAAL:12574:hC56M2O0S0:S19.2E:22000:515+8190=2:96=dut:36:0:5025:53:1109:0
Both recordings were replayed without problems using the Windows Media Player on Windows XP. It didn't even make a difference whether the PCR pid in the PMT was set to an actual value or to 0x1FFF.
I was under the impression that the WMP was one of those players that have problems if there is no PCR, but apparently it plays just fine...
Could you please do a quick test with VLC 1.0.3 under Windows? I cannot replay any recordings made from AnixeHD recorded with vdr-1.7.11. Upon replay I only get a still picture of the first recorded frame.
Are you referring to
ANIXE HD;BetaDigital:10832:hC23M5O35S1:S19.2E:22000:767=27:0;771=deu:0:1:61202:1:1057:0
Please try
--- remux.c 2010/01/23 15:39:15 2.38 +++ remux.c 2010/01/24 15:18:29 2.39 @@ -295,7 +295,7 @@ numPmtPackets = 0; if (Channel) { int Vpid = Channel->Vpid(); - int Ppid = 0x1FFF; // no PCR pid + int Ppid = Channel->Ppid(); uchar *p = buf; int i = 0; p[i++] = 0x02; // table id
That should fix it - this channel doesn't have a separate PCR pid.
Klaus