Hi, The drivers I am using I downloaded from the media build tree using "git clone git://linuxtv.org/media_build.git" as suggested on the Linuxtv.org site. However, these appear to be 'old' drivers as I am still getting 2 frontend devices created for my card when I load them. Can anyone suggest how I can get the latest set of Manu Abraham's drivers which I believe may contain some later patches. Thanks, Mark.
-----Original Message----- From: vdr-bounces@linuxtv.org [mailto:vdr-bounces@linuxtv.org] On Behalf Of Steffen Barszus Sent: Wednesday, 18 January 2012 5:47 PM To: vdr@linuxtv.org Subject: Re: [vdr] [ANNOUNCE] VDR developer version 1.7.23
On Wed, 18 Jan 2012 09:58:16 +1100 "Hawes, Mark" MARK.HAWES@au.fujitsu.com wrote:
Hi,
I have tried using my hybrid HVR 4000 card ( DVB-S2 and DVB-T frontends on one adapter ) against 1.7.23 and a new set of V4L-DVB drivers built on Monday. DVB-S channels work fine. However, any attempt to select a DVB-T channel results in "channel not available". The Syslog trace during VDR initialisation follows:
It looks like VDR is not picking up the second frontend on the hybrid card as a result of the 'Device or resource busy' result which is due to frontend 0 being open on it.
If you are using new dvb driver you should only have 1 frontend which has all of the delivery systems. The DVBv3 message also looks suspicious.
Can you double check that new drivers are loaded and you have indeed only 1 frontend for that card ? (Not saying that there is not a bug)
Regards,
-----Original Message----- From: vdr-bounces@linuxtv.org [mailto:vdr-bounces@linuxtv.org] On Behalf Of Klaus Schmidinger Sent: Monday, 16 January 2012 2:11 AM To: vdr@linuxtv.org Subject: [vdr] [ANNOUNCE] VDR developer version 1.7.23
VDR developer version 1.7.23 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.23.tar.bz2A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.22-1.7.23.diffMD5 checksums:
de136f7be28c4b6f1fa0e2218b4acc11 vdr-1.7.23.tar.bz2 2977b75cd8dacad187d11c10b867d56a vdr-1.7.22-1.7.23.diff
WARNING:
This is a *developer* version. Even though *I* use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging.
The changes since version 1.7.22:
- Removed the '.pl' suffix from svdrpsend.pl (sorry, I missed that
one).
- Fixed bonding more than two devices.
- Fixed handling symbolic links in cRecordings::ScanVideoDir()
(reported by Sundararaj Reel).
- Fixed a memory leak in cRecordings::ScanVideoDir() in case there are
too many link levels (reported by Sundararaj Reel).
- Removed redundant memset() in the ctor of cSatCableNumbers
(triggered by Ville Skyttä pointing out that the argument sequence in the call was wrong).
- Removed a redundant NULL check in cDvbSpuDecoder::setTime() (thanks
to Ville Skyttä).
- Added HasSnr to the DEBUG_SIGNALQUALITY output in
cDvbTuner::GetSignalQuality() (triggered by Ville Skyttä pointing out that the variable HasSnr was unused).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Added support for HbbTV to libsi (thanks to Christoph Haubrich).
- Added support for devices with more than one delivery system per
frontend. This requires a DVB driver with version 5.5 or higher that can handle the DTV_ENUM_DELSYS call. With older drivers it will fall back to one delivery system per frontend.
- Updated the Hungarian language texts (thanks to István Füley).
- cDvbTuner::ExecuteDiseqc() now makes sure only one tuner sends SCR
commands at any given time (reported by Frank Neumann).
- cEvent::FixEpgBugs() now replaces any newline characters in stream
component descriptions with blanks (thanks to Torsten Lang for reporting a problem with EPG data from BSkyB's "MTV MUSIC", S28.2E-2-2010-7012).
- Fixed cDvbSubtitleConverter::SetOsdData() (thanks to Rolf
Ahrenberg).
- Fixed cListBase::Move() in case From and To are equal (reported by
Sundararaj Reel).
- Added support for DVB-T2 to libsi (thanks to Rolf Ahrenberg).
- Added support for handling DVB-T2 transponders. This requires a DVB
driver with version 5.3 or higher that can handle the DTV_DVBT2_PLP_ID call (thanks to Rolf Ahrenberg).
- Fixed cConfig::Load() for g++ version 4.7.0 (thanks to Ville
Skyttä).
- Fixed a possible memory corruption in cTsToPes::GetPes() in case of
broken TS packets, e.g. when switching channels.
- Fixed the SVDRP command CLRE for a single channel in case there are
events that have a timer (thanks to Timo Eskola).
- BIDI support now checks at runtime whether the system runs with
UTF-8 (suggested by Torsten Lang).
- Added member functions Adapter() and Frontend() to cDvbDevice
(suggested by Rolf Ahrenberg).
- The parameters that are only used by "second generation" delivery
systems (DVB-S2 and DVB-T2) are no longer written into channels.conf for "first generation" delivery systems (DVB-S and DVB-T).
- Changed IndexToHMSF() so that it can handle negative Index values.
- Added option -N to the msgmerge call in the Makefile, because fuzzy
translation mostly resulted in useless strings.
- The new setup option "Replay/Show remaining time" can be used to
switch between showing the total length or the remaining time of the recording that is currently replayed.
- Fixed wrongfully displaying the length of a recording in the title
of the replay progress display.
- Fixed frozen live view with device bonding in case the bonded master
is used for live viewing (reported by Uwe Scheffler).
Have fun!
Klaus
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
_______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr