Hi,
On Sat, Feb 10, Reinhard Nissl wrote:
szap always sends DiSEqC commands, so I'd suggest to use VDR's diseqc.conf. It's default section "Full DiSEqC sequence" is identical to the tuning sequence that szap uses.
You may want to try the attached szap and VDR patch. You'll then get some output while tuning.
doesn't my driver or card support diseqc ?
--snip video:/tmp/szap # szap -a 1 -p -i reading channels from file '/root/.szap/channels.conf'
RTL Television,RTL;RTL World
zapping to 5 'RTL Television,RTL;RTL World': sat 0, frequency = 12187 MHz H, symbolrate 27500000, vpid = 0x00a3, apid = 0x0068 sid = 0x0069 using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0' FE_DISEQC_SEND_MASTER_CMD failed: Unknown error 524 FE_DISEQC_SEND_BURST failed: Operation not supported couldn't find pmt-pid for sid 0069 status 1f | signal f700 | snr ffdc | ber 00000000 | unc 00000000 | FE_HAS_LOCK
SAT.1;ProSiebenSat.1
zapping to 6 'SAT.1;ProSiebenSat.1': sat 0, frequency = 12480 MHz V, symbolrate 27500000, vpid = 0x06ff, apid = 0x0700 sid = 0x0022 FE_DISEQC_SEND_MASTER_CMD failed: Unknown error 524 FE_DISEQC_SEND_BURST failed: Operation not supported couldn't find pmt-pid for sid 0022 status 1f | signal fb00 | snr ffdc | ber 00000000 | unc 00000000 | FE_HAS_LOCK --snip--