Hello,
I'm running vdr 1.3.31 with a Cinery DVB-C 1200 card. Everything has been working fine: I've been able to watch FTA channels with no problems.
Last week I was subscribing to PayTV and therefore I installed the CineView CI (http://www.knc1.com/gb.htm) with the CAM AlphaCrypt Light. Free To All television is working until I plug in the CAM. After that I don't get any more data and I can't watch anything until the next reboot. The smartcard that I'm using has not been activated yet (wanted to do this but didn't work as everything else :-() BTW: Accessing the CAM menu and viewing informations about the smartcard is possible so I don't think the CAM is damaged.
This what the kernel says:
Linux video capture interface: v1.00 saa7146: register extension 'budget dvb /w video in'. PCI: Found IRQ 5 for device 0000:00:0a.0 saa7146: found saa7146 @ mem f0920000 (revision 1, irq 5) (0x153b,0x1156). DVB: registering new adapter (Terratec Cinergy 1200 DVB-C). adapter failed MAC signature check encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff Obudget-av: ci interface initialised. KNC1-0: MAC addr = 00:0a:ac:01:e0:fc DVB: registering frontend 0 (Philips TDA10021 DVB-C)...
...vdr's output:
VDR version 1.3.31 started vdr[2682]: loading plugins [..skipped..] kernel: budget-av: cam inserted kernel: dvb_ca adapter 0: DVB CAM detected and initialised successfully vdr[2682]: found 1 video device vdr[2682]: setting primary device to 2 vdr[2682]: SVDRP listening on port 2001 CAM: AlphaCrypt Light, 01, 4A20, 4A20 switching to channel 46 switching to channel 44
thanks in advance, chris.