Re: [vdr] Need help for LIRC + remote on serial COM port on recent Linux distrib

-- -- An ExecStart= process belonging to unit lircd.service has exited. -- -- The process' exit code is 'exited' and its exit status is 127. janv. 05 10:57:11 pctest systemd[1]: lircd.service: Failed with result 'exit-code'. -- Subject: Unit failed -- Defined-By: systemd -- Support: https://www.debian.org/support -- -- The unit lircd.service has entered the 'failed' state with result 'exit-code'. janv. 05 10:57:11 pctest systemd[1]: Failed to start Flexible IR remote input/output application support. -- Subject: L'unité (unit) lircd.service a échoué -- Defined-By: systemd -- Support: https://www.debian.org/support -- -- L'unité (unit) lircd.service a échoué, avec le résultat failed. lines 2178-2274/2274 (END) 5/ I tried your command  without succes : /usr/sbin/lircd -e lirc -H devinput -d /dev/input/by-path/platform-serial_ir.0-event-ir /etc/lircd.conf /usr/sbin/lircd: symbol lookup error: /usr/sbin/lircd: undefined symbol: release_map_remotes Did I missed something ? Regards. Karim My lircd.conf in /etc/lirc # Please make this file available to others # by sending it to lirc@bartelmus.de # # this config file was automatically generated # using lirc-0.9.1-git(default) on Tue May 28 22:32:12 2013 # # contributed by # # brand:                       RT214 from VR8139 Philips # model no. of remote control: # devices being controlled by this remote: # begin remote   name  RT214   bits           13   flags RC5|CONST_LENGTH   eps            30   aeps          100   one           960   816   zero          960   816   plead         997   gap          113915   toggle_bit_mask 0x800       begin codes           KEY_PLAY                 0x1175           KEY_PAUSE                0x1168           KEY_STOP                 0x1176           KEY_RECORD               0x117D           KEY_REWIND               0x116C           KEY_FORWARD              0x116E           KEY_MENU                 0x0170           KEY_EXIT                 0x0171           KEY_CHANNELUP            0x1160           KEY_CHANNELDOWN          0x1161           KEY_UP                   0x1010           KEY_DOWN                 0x1011           KEY_LEFT                 0x116F           KEY_RIGHT                0x116A           KEY_OK           0x114A           KEY_AUDIO                0x116B           KEY_BACK                 0x114B           KEY_SUBTITLE             0x117C           KEY_MACRO                0x1171           KEY_INFO                 0x016F           KEY_RED                  0x016B           KEY_GREEN                0x016C           KEY_YELLOW               0x016D           KEY_BLUE                 0x016E           KEY_EPG                  0x014A           KEY_DVD                  0x016F           KEY_F1                   0x017A           KEY_F2                   0x116E           KEY_F3                   0x117A           KEY_F4                   0x017D           KEY_F5                   0x014A           KEY_F6                   0x114F           KEY_0                    0x1140           KEY_1                    0x1141           KEY_2                    0x1142           KEY_3                    0x1143           KEY_4                    0x1144           KEY_5                    0x1145           KEY_6                    0x1146           KEY_7                    0x1147           KEY_8                    0x1148           KEY_9                    0x1149       end codes end remote Le 04/01/2020 à 23:02, Mikko Tuumanen a écrit : >> - lirc_serial move out of staging (is no longer part of the kernel) >> and/or rename to serial_ir. > Here are my notes about those lirc changes from March 2019. > > > You still need to release the serial port from normal serial driver: > setserial /dev/ttyS0 uart none > > Load serial_ir module, no need for lirc_serial. > > serial_ir will create a /dev/lircN device, and also a /dev/input/eventM > > Load one of the ir_*_decoder modules too, for example ir_rc5_decoder or > ir_rc6_decoder depending on the type of your remote. This way you'll probably > don't need to teach remotes to lircd with irrecord, but can just read events > from /dev/input/eventM > > Do a > cat /sys/class/rc/rc*/protocols > That will show you list(s) of supported remote models and you can change the > model by writing your choice back to the protocols file. > > Before I knew all this, I tried to teach remote to lircd with irrecord, like > irrecord -H default -d /dev/lircN > > This way I couldn't get irrecord to learn about a Technotrend remote I have. > > After I chose rc-5 with the protocols file, I started to get events from /dev/ > input/eventM. This wasn't enough to get lircd to react to the events, so I had > to teach them to lircd by running > irrecord -H devinput -d /dev/input/eventM > > After that I ran lircd with > lircd -e lirc -H devinput \ > -d /dev/input/by-path/platform-serial_ir.0-event-ir \ > /etc/lircd.conf > > And now lirc works again! > > > > Unfortunately I still couldn't figure out how I could use the Technotrend > remote with built-in ir receiver of CT2-4400. There is a /dev/input/event- > device for it, but no events come through. > > > > > _______________________________________________ > vdr mailing list > vdr@linuxtv.org > https://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr