Hi Milos,
I have 2 x VDR boxes using TBS6280, TBS6922 and TBS6928. - vdr-2.0.6 on Debian. - TBS drivers from 2013-09-01 - IR receiver not from TBS cards, but TSOP on com port with LIRC.
At the beginning, drivers was buggy, and I could't use dvb-t *AND* dvb-s2 cards at the same time. I worked with TBS support during several weeks to fix the problem : they even sent to me USB card to check if problem was from PCI-E or from driver, etc...). At the end, they fixed their driver and all was OK. Technical support is really excellent !
The only restriction I have is from CAM, even if it's a "dual" : I can't register two channels at the same time, I don't know if limitation is from VDR or from CAM (I tried with Viaccess Secure from SMIT and NEOTION, same problem).
You should contact TBS support, I am sure they could help you. => euro_support@tbsdtv.com
Regards. Karim
-----Message d'origine----- De : vdr-bounces@linuxtv.org [mailto:vdr-bounces@linuxtv.org] De la part de Milos Kapoun Envoyé : mardi 10 juin 2014 17:17 À : VDR Mailing List Objet : Re: [vdr] TBS6285 slow onscreen menu
I tested it with VLC, problem is definitely in the TBS drivers.
Milos
Dne 2014-06-10 11:09, Milos Kapoun napsal:
Hi, I continued with investigation. I build new computer, there is only VDR and two TBS6285 cards. When I start VDR with one adapter CPU load rises to 2 and after 5 minutes drops to 0.03 . There is no streaming, no playing. In the syslog are not any bad messages. When I use all 8 adapters CPU load is between 4 and 12, never drops.
There is no problem with signal quality. In the cannels.conf is only one multiplex. EPG scan take 2 seconds.
How can I find what VDR doing with not used adapters? Maybe those adapters are not initialized and in the driver are bad defaults.
Miloš
CPU load debug, it is really strange. I tried to exclude IRQ storm, but it is difficult to confirm it. :
# uname -a Linux streamer 3.2.0-4-amd64 #1 SMP Debian 3.2.57-3+deb7u2 x86_64 GNU/Linux
TBS drivers tbs-linux-drivers_v140425.zip
# top top - 21:24:54 up 8:51, 2 users, load average: 5.14, 3.02, 2.50 Tasks: 90 total, 1 running, 89 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.2 us, 0.7 sy, 0.0 ni, 98.3 id, 0.8 wa, 0.0 hi, 0.0 si, 0.0 st KiB Mem: 3931580 total, 250052 used, 3681528 free, 16472 buffers KiB Swap: 9823740 total, 0 used, 9823740 free, 110824 cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 9966 root 20 0 342m 28m 3332 S 2.3 0.7 0:05.46 vdr 4333 mika 20 0 71272 1820 1012 S 0.3 0.0 0:00.58 sshd 8290 root 20 0 0 0 0 S 0.3 0.0 0:00.34 kworker/0:1
# cat /proc/interrupts CPU0 CPU1 0: 41 108 IO-APIC-edge timer 1: 0 2 IO-APIC-edge i8042 7: 1 0 IO-APIC-edge 8: 0 1 IO-APIC-edge rtc0 9: 0 0 IO-APIC-fasteoi acpi 12: 1 6 IO-APIC-edge i8042 14: 0 0 IO-APIC-edge pata_atiixp 15: 0 0 IO-APIC-edge pata_atiixp 16: 0 1 IO-APIC-fasteoi ohci_hcd:usb2 17: 0 2 IO-APIC-fasteoi ohci_hcd:usb3, ohci_hcd:usb5 18: 0 2 IO-APIC-fasteoi ohci_hcd:usb4, ohci_hcd:usb6 19: 0 0 IO-APIC-fasteoi ehci_hcd:usb1 22: 14 27576 IO-APIC-fasteoi ahci 43: 183 391691 PCI-MSI-edge eth0 44: 369 710371 PCI-MSI-edge SAA716x Core 45: 251 566014 PCI-MSI-edge SAA716x Core NMI: 5 13 Non-maskable interrupts LOC: 396566 714959 Local timer interrupts SPU: 0 0 Spurious interrupts PMI: 5 13 Performance monitoring interrupts IWI: 0 0 IRQ work interrupts RES: 193929 146089 Rescheduling interrupts CAL: 501 262 Function call interrupts TLB: 3904 3155 TLB shootdowns TRM: 0 0 Thermal event interrupts THR: 0 0 Threshold APIC interrupts MCE: 0 0 Machine check exceptions MCP: 108 108 Machine check polls ERR: 1 MIS: 0
# vmstat procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 3681288 16844 110836 0 0 2 2 50 58 0 0 100 0
# iostat Linux 3.2.0-4-amd64 (streamer) 09/06/14 _x86_64_ (2 CPU)
avg-cpu: %user %nice %system %iowait %steal %idle 0.08 0.03 0.15 0.05 0.00 99.70
Device: tps kB_read/s kB_wrtn/s kB_read kB_wrtn sda 0.31 2.05 3.21 66315 103770 sdb 0.29 1.73 3.21 55924 103770 md0 0.44 3.69 3.19 119305 102904
# mpstat Linux 3.2.0-4-amd64 (streamer) 09/06/14 _x86_64_ (2 CPU)
21:32:56 CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle 21:32:56 all 0.08 0.03 0.14 0.05 0.00 0.00 0.00 0.00 99.70
# uptime 21:33:01 up 8:59, 2 users, load average: 5.02, 4.50, 3.45
# lspci -vvvnn 03:00.0 Multimedia controller [0480]: Philips Semiconductors SAA7160 [1131:7160] (rev 02) Subsystem: Device [6285:0001] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at fdf00000 (64-bit, non-prefetchable) [size=1M] Capabilities: [40] MSI: Enable+ Count=1/32 Maskable- 64bit+ Address: 00000000fee0300c Data: 4191 Capabilities: [50] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [74] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] Vendor Specific Information: Len=50 <?> Capabilities: [100 v1] Vendor Specific Information: ID=0000 Rev=0 Len=088 <?> Kernel driver in use: SAA716x TBS
# lsmod tbs6982fe 21981 1 saa716x_tbs_dvb tbs6680fe 17177 1 saa716x_tbs_dvb tbs6923fe 21981 1 saa716x_tbs_dvb tbs6985se 17489 1 saa716x_tbs_dvb tbs6928se 17489 1 saa716x_tbs_dvb tbs6982se 21981 1 saa716x_tbs_dvb tbs6991fe 17452 1 saa716x_tbs_dvb tbs6618fe 17177 1 saa716x_tbs_dvb saa716x_core 39763 29 saa716x_tbs_dvb tbs6922fe 21981 1 saa716x_tbs_dvb tbs6928fe 17452 1 saa716x_tbs_dvb tbs6991se 17489 1 saa716x_tbs_dvb tbs6290fe 50137 1 saa716x_tbs_dvb stv090x 42943 1 saa716x_tbs_dvb dvb_core 77733 6 saa716x_core,saa716x_tbs_dvb rc_core 18329 8
ir_nec_decoder,ir_rc5_decoder,ir_rc6_decoder,ir_sony_decoder,ir_mce_kbd_decoder,ir_jvc_decoder,ir_lirc_codec,saa716x_tbs_dvb i2c_algo_bit 12841 2 saa716x_tbs_dvb,radeon i2c_core 23876 21
i2c_algo_bit,i2c_piix4,drm,stv090x,tbs6290fe,drm_kms_helper,tbs6991se, tbs6928fe,tbs6922fe,saa716x_core,tbs6618fe,tbs6991fe,tbs6982se,tbs6928 se,tbs6985se,tbs6923fe,tbs6680fe,
Dne 2014-06-02 16:23, Milos Kapoun napsal:
Hi, I have problem witch TBS6285 card
(http://www.buydvb.net/dvbt2-tv-tuner-pcie-c-12/tbs6285-dvbt2tc-quad- tv-tuner-pcie-card-p-93.html), it was difficult to get it work. TBS drivers replace all media tree in the kernel. After compilation I have problem with IR remote on the current Hauppage Nova–T card. I decided to use only drivers for new card with original kernel media build and it is impossible. Then I changed IR receivers and connect it to the TBS6285. TBS have different 3V IR receivers. And the end, VDR onscreen menu is unusable slow. 30s between key presses. CPE load is more than 2, replay is OK, less than 0.2. Menu parts, for example settings are good too. I think it caused by function witch reading information from card.
Do you have any experience with this card or advice?
Thank you Miloš
TBS driver : v140425 VDR: vdr-2.1.1 Kernel : Linux VDR2 3.12.20 #7 SMP PREEMPT Thu May 29 20:18:02 CEST 2014 i686 GNU/Linux
PS: Years ago I read in the mailing list, that VDR is not plug and play, it is learning how computer works. I can confirm it and adding: “VDR is my destiny or my curse” J.
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
_______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr