adrian.challinor@osiris.co.uk(Adrian P Challinor) 01.06.05 07:45
For example:
May 30 23:07:45 vdr vdr[8991]: ERROR: unknown picture type '5' May 30 23:07:46 vdr vdr[8991]: ERROR: unknown picture type '4'
UPT errors (unknown picture type) might be caused by a bad antenna too. But you said, the live stream on the FF is OK...
Femon is saying I am only getting 22-23% signal strength. That could be a problem.
I assume that is the problem.
Go the next TV store and by a TV antenna amplifier. (approx. 8 euro)
It's known thet DVB-T cards and setop box needs very different receive levels- One may work with a two device spltter other not.
You know you need "T" or "Y" to splitt the signal to your 2 cards and that each "T" have a -physicall required- damping of 3 resp. 6db: Energy coming from the antenna, say 50uW, is distributed equally between the two devices! Given 25uW for each, a further splitter for the third device and you will have only 12uW (minus the losts in the splitter them selves) It's not like connection 3 Device to 230V!
For example at reichelt.de i found Axing TVS 8-01 TV distribution amplifier 16.90 Euro (Might be sufficent for 2 devices with splitter) Or, most effective: Axing TVS 16-00 6-way distribution amplifier 50.70 Euro
(16 Euro is for such a simple amplifier not really cheap)
Rainer---<=====> Vertraulich // // <=====>--------------ocholl, Kiel, Germany ------------