Hello,
I want to buy this card, but before I wnat to know if this card works fine
under linux and with vdr. Can some one tell me if is using this card and is ok?
I have this card and recently I reinstall my system.
The card is recognized from kernel 2.6.28 so you don't need to patch dvb driver.
My vdr, with recent s2api dvb driver, don't use this card. Vdr find the card but can't tune any channel. Femon plugin show me always 0% signal while kaffeine can tune channels.
Maybe I missed something, I'm investigating.
Beside, with my older system I never used dvb-t tuner in vdr.
If you want to use this card for both sat and dvb with vdr, I suggest you to buy 2 different card, one sat(-S2) and one dvb-t or one sat-card and one usb-stick for dvb-t.
PS: I hope someone misleading me so I might be able to use the full functionality of this card.
Il 25/05/2009 11:53, lucian orasanu ha scritto:
Hello,
I want to buy this card, but before I wnat to know if this card works fine
under linux and with vdr. Can some one tell me if is using this card and is ok?
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
I have one "Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=68,autodetected]" at work.
Currently there is - Debian 5.0.1 (lenny) with - self compiled 2.6.29.2 - dvb drivers from hg, pulled around 11.5. - vdr-1.7.7 - streamdev-server from vdr-developer.org CVS
With this setup I am finally able to tune and receive DVB-S2 channels. I don't know what was the problem, but all earlier attempts failed for some reason. These are not minimum requirements for version numbers to get it working, just an example of something that works.
For example these two channels can be received: ANIXE HD;BetaDigital:11302:hC23M5O35S1:S19.2E:22000:255=27:0;259=deu:0:0:4900:1:1007:0 ASTRA HD +;BetaDigital:11302:hC23M5O35S1:S19.2E:22000:511=27:0;515=deu:0:0:4901:1:1007:0
If you want to use this card for both sat and dvb with vdr, I suggest you to buy 2 different card
I agree. AFAIK the HVR-4000 can't receive DVB-T and DVB-S/S2 at the same time, so it would be a good idea to buy a (cheaper) S/S2-only-card and a separate card for T.
VDR doesn't seem support the DVB-T side of the HVR-4000. Now that I tried, I get a "channel not available" when trying to switch to a T channel. It is probably because VDR doesn't open the adapterX/frontend1 device that is used to control the DVB-T receiver.
The DVB-T side of the card works fine with tzap or any application that can be told to use the frontend1 device. Analog parts of the card are also supported. I haven't tried analog tv, but the composite input gets me some kind of picture. There is also a /dev/radio0, and it can produce at least static.
BTW, has anybody succeeded in decoding anixe hd or astra hd+ with vdpau? Every time I've tried, the result has been mostly garbage and usually kill -9 to Xserver and xine is needed. Popcorn hour networked media tank decodes those channels much better. So far I have only tried using xine, mplayer, etc through streamdev, (not xineliboutput yet)
On Monday 25 of May 2009, Fabio Bordin wrote:
I have this card and recently I reinstall my system.
The card is recognized from kernel 2.6.28 so you don't need to patch dvb driver.
My vdr, with recent s2api dvb driver, don't use this card. Vdr find the card but can't tune any channel. Femon plugin show me always 0% signal while kaffeine can tune channels.
Maybe I missed something, I'm investigating.
Beside, with my older system I never used dvb-t tuner in vdr.
I have no problem with this card and dvb-s2 drivers from Igor Liplianin's hg together with vdr-1.7.7. I'm not using dvb-t.
I have installed s2-liplianin-2866ecb5e66b.tar.bz2 from http://mercurial.intuxication.org/hg/s2-liplianin/ - it is not current tip, but no need to update.
BR,
Ales
I have this card and recently I reinstall my system.
The card is recognized from kernel 2.6.28 so you don't need to patch dvb driver.
My vdr, with recent s2api dvb driver, don't use this card. Vdr find the card but can't tune any channel. Femon plugin show me always 0% signal while kaffeine can tune channels.
Maybe I missed something, I'm investigating.
Beside, with my older system I never used dvb-t tuner in vdr.
I have no problem with this card and dvb-s2 drivers from Igor Liplianin's hg together with vdr-1.7.7. I'm not using dvb-t.
I have installed s2-liplianin-2866ecb5e66b.tar.bz2 from http://mercurial.intuxication.org/hg/s2-liplianin/ - it is not current tip, but no need to update.
I have no problem with hvr4000 and dvb-s2/s channels I'm using the Igor Liplianin's hg repo and I am not using dvb-t.
Goga
Il 25/05/2009 20:19, Goga777 ha scritto:
I have this card and recently I reinstall my system.
The card is recognized from kernel 2.6.28 so you don't need to patch dvb driver.
My vdr, with recent s2api dvb driver, don't use this card. Vdr find the card but can't tune any channel. Femon plugin show me always 0% signal while kaffeine can tune channels.
Maybe I missed something, I'm investigating.
Beside, with my older system I never used dvb-t tuner in vdr.
I have no problem with this card and dvb-s2 drivers from Igor Liplianin's hg together with vdr-1.7.7. I'm not using dvb-t.
I have installed s2-liplianin-2866ecb5e66b.tar.bz2 from http://mercurial.intuxication.org/hg/s2-liplianin/ - it is not current tip, but no need to update.
I have no problem with hvr4000 and dvb-s2/s channels I'm using the Igor Liplianin's hg repo and I am not using dvb-t.
Goga
Last night I understood why I was not able to use the card with VDR: I'm using a 64-bit.
I tried the same firmware and drivers in a 32-bit os and everything worked correctly.
On Tue, May 26, 2009 at 08:55:58AM +0200, Fabio Bordin wrote:
Last night I understood why I was not able to use the card with VDR: I'm using a 64-bit.
I tried the same firmware and drivers in a 32-bit os and everything worked correctly.
Then you did something wrong in your x86_64 system : it works fine here.
On Tuesday 26 of May 2009, Fabio Bordin wrote:
Il 25/05/2009 20:19, Goga777 ha scritto:
I have this card and recently I reinstall my system.
The card is recognized from kernel 2.6.28 so you don't need to patch dvb driver.
My vdr, with recent s2api dvb driver, don't use this card. Vdr find the card but can't tune any channel. Femon plugin show me always 0% signal while kaffeine can tune channels.
Maybe I missed something, I'm investigating.
Beside, with my older system I never used dvb-t tuner in vdr.
I have no problem with this card and dvb-s2 drivers from Igor Liplianin's hg together with vdr-1.7.7. I'm not using dvb-t.
I have installed s2-liplianin-2866ecb5e66b.tar.bz2 from http://mercurial.intuxication.org/hg/s2-liplianin/ - it is not current tip, but no need to update.
I have no problem with hvr4000 and dvb-s2/s channels I'm using the Igor Liplianin's hg repo and I am not using dvb-t.
Goga
Last night I understood why I was not able to use the card with VDR: I'm using a 64-bit.
I tried the same firmware and drivers in a 32-bit os and everything worked correctly.
No problem here - working for more than one year at 64bit Debian (Sid->Lenny-
Squeeze).
Il 26/05/2009 15:13, Ales Jurik ha scritto:
On Tuesday 26 of May 2009, Fabio Bordin wrote:
Il 25/05/2009 20:19, Goga777 ha scritto:
I have this card and recently I reinstall my system.
The card is recognized from kernel 2.6.28 so you don't need to patch dvb driver.
My vdr, with recent s2api dvb driver, don't use this card. Vdr find the card but can't tune any channel. Femon plugin show me always 0% signal while kaffeine can tune channels.
Maybe I missed something, I'm investigating.
Beside, with my older system I never used dvb-t tuner in vdr.
I have no problem with this card and dvb-s2 drivers from Igor Liplianin's hg together with vdr-1.7.7. I'm not using dvb-t.
I have installed s2-liplianin-2866ecb5e66b.tar.bz2 from http://mercurial.intuxication.org/hg/s2-liplianin/ - it is not current tip, but no need to update.
I have no problem with hvr4000 and dvb-s2/s channels I'm using the Igor Liplianin's hg repo and I am not using dvb-t.
Goga
Last night I understood why I was not able to use the card with VDR: I'm using a 64-bit.
I tried the same firmware and drivers in a 32-bit os and everything worked correctly.
No problem here - working for more than one year at 64bit Debian (Sid->Lenny-
Squeeze).
I finally find out what was wrong with my system: extension patch 77 for vdr 1.7.0 put ko my hwr4000. With this patch applied (vdr-1.7.0-ext_h264-s2ng-speedup.diff) to a vanilla 1.7.0 source hwr4000 won't work. On same system, vdr 1.6.0 and 1.7.7 work well.
I want to buy this card, but before I wnat to know if this card works fine under linux and with vdr. Can some one tell me if is using this card and is ok?
New S2API kernels like 2.6.25 have more or less supported the card out of the box either via old driver API or via newer S2API. (Some kernel version between those had some bug... but I am at the moment using this hard with Mandriva 2009.1 (kernel 2.6.29) that works just fine.)
In addition of the driver, you need to install also the firmware. (see http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-4000)
For daily use I use still vdr-1.6.0 that shows me the dvb-s channels by using the old driver interfaces, but does not yet support dvb-s2. I have however tested with vdr-1.7.4 that dvb-s2 channels works with it ok. (VDR 1.7.0-1.7.3 did not work for me with hvr-4000)
I have not recently tested does the latest vdr developer versions support now both the dvb-t and dvb-s/s2 simulteneously from the same card, but at least with older vdr versions that S2API feature was not working with vdr. (There are separate frontend for dvb-t and dvb-s/s2 under single adapter)
ls -la /dev/dvb/adapter1/ total 0 drwxr-xr-x 2 root root 200 2009-05-13 03:09 ./ drwxr-xr-x 4 root root 80 2009-05-13 03:09 ../ crw-rw----+ 1 lamikr video 212, 68 2009-05-13 03:09 demux0 crw-rw----+ 1 lamikr video 212, 84 2009-05-13 03:09 demux1 crw-rw----+ 1 lamikr video 212, 69 2009-05-13 03:09 dvr0 crw-rw----+ 1 lamikr video 212, 85 2009-05-13 03:09 dvr1 crw-rw----+ 1 lamikr video 212, 67 2009-05-13 03:09 frontend0 crw-rw----+ 1 lamikr video 212, 83 2009-05-13 03:09 frontend1 crw-rw----+ 1 lamikr video 212, 71 2009-05-13 03:09 net0 crw-rw----+ 1 lamikr video 212, 87 2009-05-13 03:09 net1
Mika