On Mon, 31 Jan 2011, Oliver Schinagl wrote:
I'm still having trouble getting this all working. I used http://www.vdr-portal.de/board/thread.php?postid=818661 to get me through the setup, without avail. --opengl-all doesn't seem to be a valid option? Or I can't find anything about it. --hud works however.
$ vdr-sxfe --help vdr-sxfe 1.0.90-cvs (build with xine-lib 1.1.90, using xine-lib 1.1.90) <snip> -D, --hud[=flag[,flag]] Head Up Display OSD mode using compositing flags: xshape Use XShape instead of compositing opengl Use OpenGL instead of compositing -O, --opengl Use OpenGL for video and Head Up Display OSD <snip>
-->
vdr-sxfe --hud vdr-sxfe --hud=xshape vdr-sxfe --hud=opengl vdr-sxfe --hud=opengl --opengl
would have been loads easier if vdr-sxfe would simply act as the most minimalistic window manager by itself and create the hud window itself.
Patches are always welcome.
BR, -- rofa
On 01/31/11 20:45, Rolf Ahrenberg wrote:
On Mon, 31 Jan 2011, Oliver Schinagl wrote:
I'm still having trouble getting this all working. I used http://www.vdr-portal.de/board/thread.php?postid=818661 to get me through the setup, without avail. --opengl-all doesn't seem to be a valid option? Or I can't find anything about it. --hud works however.
$ vdr-sxfe --help vdr-sxfe 1.0.90-cvs (build with xine-lib 1.1.90, using xine-lib 1.1.90)
<snip> -D, --hud[=flag[,flag]] Head Up Display OSD mode using compositing flags: xshape Use XShape instead of compositing opengl Use OpenGL instead of compositing -O, --opengl Use OpenGL for video and Head Up Display OSD <snip>
-->
vdr-sxfe --hud vdr-sxfe --hud=xshape vdr-sxfe --hud=opengl vdr-sxfe --hud=opengl --opengl
but no --opengl-all
I will shamefully admit that I forgot to revisit those options and check those out.
would have been loads easier if vdr-sxfe would simply act as the most minimalistic window manager by itself and create the hud window itself.
Patches are always welcome.
I'm still using an older 1.6 package, once I'll get a 1.7 snapshot going, i'll work on it
BR,
rofa
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
And the reason why I hadn't tried those:
vdr-sxfe: option '--hud' doesn't allow an argument vdr-sxfe: unrecognized option '--opengl'
So I come back to the fact, that I can get -hud (guessing on opengl) working when starting everything from a termina, X; wm; vdr, but when i start it from .xinitrc, VDR just goes black, and nothing works.
On 02/01/11 08:38, Oliver Schinagl wrote:
--hud=opengl --opengl
On 2011-02-01 19:48 +0100, Oliver Schinagl wrote:
And the reason why I hadn't tried those:
vdr-sxfe: option '--hud' doesn't allow an argument vdr-sxfe: unrecognized option '--opengl'
Then you have an old version of Xineliboutput. What does vdr-sxfe -h say about the options? For example, I'm using the yaVDR-packaged version, which is probably two or three weeks older than rofa's CVS build, and it has these switches:
-D, --hud Head Up Display OSD mode using compositing -Q, --opengl-always Always use OpenGL for video and Head Up Display OSD -O, --opengl-hud Head Up Display OSD mode using OpenGL
Since SourceForge's CVS servers are still down, it may be a bit tricky to get the latest and greatest version.
-- Niko
* media-plugins/vdr-xineliboutput Latest version available: 1.0.5-r1 Latest version installed: 1.0.5-r1
is the version i'm havinga vailable to me on gentoo :)
On 02/01/11 20:54, Niko Mikkilä wrote:
On 2011-02-01 19:48 +0100, Oliver Schinagl wrote:
And the reason why I hadn't tried those:
vdr-sxfe: option '--hud' doesn't allow an argument vdr-sxfe: unrecognized option '--opengl'
Then you have an old version of Xineliboutput. What does vdr-sxfe -h say about the options? For example, I'm using the yaVDR-packaged version, which is probably two or three weeks older than rofa's CVS build, and it has these switches:
-D, --hud Head Up Display OSD mode using compositing -Q, --opengl-always Always use OpenGL for video and Head Up Display OSD -O, --opengl-hud Head Up Display OSD mode using OpenGL
Since SourceForge's CVS servers are still down, it may be a bit tricky to get the latest and greatest version.
-- Niko
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Hi!
There is also -9999 version, the problem is that it uses CVS at sourceforge, and this does not work at the moment.
Regards
Marco
Am 01.02.2011 21:40, schrieb Oliver Schinagl:
- media-plugins/vdr-xineliboutput Latest version available: 1.0.5-r1 Latest version installed: 1.0.5-r1
is the version i'm havinga vailable to me on gentoo :)
On 02/01/11 20:54, Niko Mikkilä wrote:
On 2011-02-01 19:48 +0100, Oliver Schinagl wrote:
And the reason why I hadn't tried those:
vdr-sxfe: option '--hud' doesn't allow an argument vdr-sxfe: unrecognized option '--opengl'
Then you have an old version of Xineliboutput. What does vdr-sxfe -h say about the options? For example, I'm using the yaVDR-packaged version, which is probably two or three weeks older than rofa's CVS build, and it has these switches:
-D, --hud Head Up Display OSD mode using compositing -Q, --opengl-always Always use OpenGL for video and Head Up Display OSD -O, --opengl-hud Head Up Display OSD mode using OpenGL
Since SourceForge's CVS servers are still down, it may be a bit tricky to get the latest and greatest version.
-- Niko
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Hello
You can also use git repo: git://projects.vdr-developer.org/xineliboutput.git
I attach my own git version ebuild to xinelibout if it help you.
Tommi
On 02/01/2011 11:37 PM, Marco Göbenich wrote:
Hi!
There is also -9999 version, the problem is that it uses CVS at sourceforge, and this does not work at the moment.
Regards
Marco
Am 01.02.2011 21:40, schrieb Oliver Schinagl:
- media-plugins/vdr-xineliboutput Latest version available: 1.0.5-r1 Latest version installed: 1.0.5-r1
is the version i'm havinga vailable to me on gentoo :)
On 02/01/11 20:54, Niko Mikkilä wrote:
On 2011-02-01 19:48 +0100, Oliver Schinagl wrote:
And the reason why I hadn't tried those:
vdr-sxfe: option '--hud' doesn't allow an argument vdr-sxfe: unrecognized option '--opengl'
Then you have an old version of Xineliboutput. What does vdr-sxfe -h say about the options? For example, I'm using the yaVDR-packaged version, which is probably two or three weeks older than rofa's CVS build, and it has these switches:
-D, --hud Head Up Display OSD mode using compositing -Q, --opengl-always Always use OpenGL for video and Head Up Display OSD -O, --opengl-hud Head Up Display OSD mode using OpenGL
Since SourceForge's CVS servers are still down, it may be a bit tricky to get the latest and greatest version.
-- Niko
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
-
Marco Göbenich -
Niko Mikkilä -
Oliver Schinagl -
prelude -
Rolf Ahrenberg